Which makes the PC Speed Maximizer Software?

Similar Questions

• Simple question? What is the value proposition of Muse, which makes the special muse? I just want to see what think

  What is the value proposition of Muse, which makes the special muse? I just want to see what people think.

  Please refer to the explanation of Brian on the product:

  https://forums.Adobe.com/message/4580442

  Thank you

  Sanjit

• In the example LabVIEW Full featured, which makes the entry point button reappear?

  My question is this: what piece of LV code or invoke the node for the TS engine makes the entry Point button reappear when loading a file of sequence?

  Background:

  I inherited a modified version of Full Featured LabVIEW UI, which has been moderately modified (enough so this restart is not really an option, but it is still quite similar to use as comparisons for behaviors).  In addition, this code was started in LV2012/TS2012 and I'm migrating to LV2013/TS2013, but this behavior is consistent in both versions.

  Here is what I tried:
  I have found that when the command connect runs (see attachment), the button which is a TSUI. IButton control, SEAO is grayed out or hidden.  In the unmodified example user interface provided with TestStand, button is again displayed when loading a file of sequence.  The problem is that when I load a movie file in my code and click it before the race, the button does not reappear. In my code, I can run the sequence successfully by right click on the movie file and selecting run, so I don't think the sequence has an error, or the process model.

  Thanks in advance,

  Seth

  Seth,

  The entry 'options' of the ConnectCommand function controls this. On help page for this entry, you can see that there are options for "ignore enable" and "ignore visible." Or any of them may affect the functionality of the key entry point. You could try to make the options for both keys 0 and see if that fixes the problem. If this isn't the case, please let us know.

• Wuauclt.exe pigs all time processor which makes the computer unusable

  The machine is a laptop Dell Vostro 1000 with Win XP SP3 Home edition. It has 2 GB of RAM with a 120 GB hard drive that is half full. The computer initially had no protection against the virus, then McAfee and Norton now. The problem exists all along.

  For the past two years after start-up, the hard disk will work continuously for 30-40 minutes. Meanwhile, the computer is unresponsive and almost unusable. Meanwhile, the wuauclt.exe program uses 10 to 20% of the time processor, 100% of the time of HDD and 200 to 300 MB of memory. I did a lot of research on this issue. It is clear that this is caused by the logic messed up in one of the programs of updates windows several years ago. I looked at several positions of MVP and/or Microsoft employees, but none of them is no fix for the problem. They say all to come or try this. I tried all the tips I can find. None of them work with the exception of just disable the updates of Windows.

  I contacted Microsoft by phone about it. They suggested that I do a repair of the original disc for Win XP. This does not work because the Win XP disk is earlier than SP3. He won't do anything.

  All I have to do is find a way to remove all Windows Update of the computer software, so it can relocate. I found links to FixIt program on the Microsoft Web site, which is supposed to do, but when I run it, it stops and says something in the sense of "this software will not work with the operating system on your computer".

  It's really discouraging that Microsoft caused this problem and then did nothing to remedy.

  Have you ever done a repair facility or even a clean installation of Windows XP?

• HP DV2700 - Vista using disks fails to make the preinstallation of office software

  I'm trying to help my daughter long distance.

  His laptop crashed and she didn't know why and impossible to restore using disks or F11.

  She is more concerned about its data and had the drive removed and placed in an external USB enclosure to access its files later.

  A new HARD disk has been placed and she began to do a restore from the disks, she did years back.

  Everything went along and then at the level of the office, she said that it is on part 2 to preinstallation of software

  and he gave him a warning that windows cannot complete the installation.

  She restarted and got a screen that said Windows installation.

  She tries again to the procedure.

  While that's going on, can someone tell me what could be the problem?

  One of the most common causes of this problem (that I've seen) is that most new hard drives sold today are Advanced Format that triggers Vista and Windows 7 recovery discs. If she can get a disk hard no AF, it should have better luck.

  Sometimes, it works to prepare a new hard drive with the utility from Cyberlink cd first. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the downloaded file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• BlackBerry Smartphones Please help - duplication of the e-mail messages, which makes the phone unusable...

  I tried to find an answer to this problem on the rest of the site, but all I can find are for people receiving two copies of the same message - I've received duplicate emails a minute 20 and I have no idea why.  The phone was fine until yesterday afternoon, and then began receiving duplicates.  At the beginning it was just a little, now it sends a new double about every minute for every e-mail I've received since its start to duplicate.  Last time I looked there were about 200 messages duplicated in my Inbox, and I dared not look at it from.  Therefore, messages from facebook that makes me think that it must be something to do with the phone itself.  All emails claim to be received using my gmail address, but gmail itself received a copy of each.  I have not changed the settings on my email or on my Blackberry.

  Please, if anyone has an idea how to make this stop, help me - my phone is now useless because it is so concerned with the reception of emails that all other features are slow and jerky, and I can't put the most because it's like having a fire alarm in my handbag.

  Thanks for any help!

  Thanks for the advice, but more than 800 e-mails duplicated later it seems recovering in itself!  Of course, patience is a virtue...

• Satellite L855-B412 - which makes the DVD recovery to win 8.1

  I have Toshiba Satellite L855-B412 I bought last year that came with windows 8.
  I have upgraded to windows 8.1 through the windows store and then updated the derivers of the system for windows 8.1
  then I system backup on 2 DVD using the Toshiba system backup utility.

  When I restore the system of these DVD I get windows 8.1 or the old windows 8?

  Recovery media creator Toshiba does not create the image of an operating system recovery real but just copy original recovery image designed by Toshiba.
  With other words after using recovery discs, you will have same Win8 version as you guessed it with your new laptop.

• 14 elements which makes the low pictures even when save as max

  I used elements 11 but upgraded to 14, after editing photos in 14 I save like max (12), but for some reason any it saves the file as 1.6 mb. I reissued the same photo in 11 registered and it registers as a 6.3 mb. What is happening with 14 elements?

  Thank you

  Moving to Photoshop Elements

• Acrobat Reader DC: Too white which makes the difficult document on the eyes.

  I just installed Adobe Acrobat Reader DC. It is difficult to read because of all the white people. Is it possible to change the color of the side panels on each side of the displayed document drey very light?

  Thanks in advance.

  Mike

  Hi 8jvu3qfQR,

  I understand your frustration, you can provide your comments using this link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  And, as far as the new design of the Interface DC Acrobat/Reader is concerned, I would ask to visit this link: Reimagining Acrobat: Interview with the Director of the Design Jamie Myrold.

  Kind regards

  Rahul

• How to make the waveform table rows less laeti WITHOUT using a lot of mathematics of interpolation

  

  So I use a graph shaped wave, the numbers of entries sequence like that, sensor 22,23,24,25... the graph seems laeti. (Fussy) client says hey I want a good graph, you have function spline or something?

  So I was to research the properties of chart and saw the settings below that does not help much. I proposed to the customer (picky) that Hey maybe we can make the balance Y greater for the lines of the stairs will be not so obvious, the customer (picky) says no. So I was sweating on tedious mathematics required for interpolation in the hot oil and noisy, without internet, fortunately the dinner bell rang.

  Now is there some function blocks which makes the table lines smooter, a function spline or something? Thank you.

  
  

• BlackBerry Z10 backspace and return keys make the phone unusable

  Whenever I have try and try to make a correction using the BACKSPACE, the return key back does not stop and erase the entire message. Or if I hit the return key, is not just return to the next line, he returned several times to make an infinite number of new lines.

  Basically this problem which makes the text, email, emails, etc. useless - I can read things, but can not use the key on Board at all.

  I tried every setting I can find on the phone, nothing seems to fix this.

  What is the solution?

  Thanks for the suggestions. Type once is not always just delete a character, but she often starts removing repeatedly with nonstop until the field is empty. Changing the magnification does not seem to help, but by turning on 'off' in the keyboard screen seems to make it happen less often, but not completely. Pressing the button entry still produces endless returns. Hit the button Delete to the right and back also helps to key rather that hit.

  I hope an update will fix it.

• automatically change the fan speed depending on the temperature.

  I wish I could for my computer automatically adjust the fan speed depending on the temperature. I don't think he does in itself because the speed never changes.

  Any help will be appreciated.

  Hello joshblacher,

  There is a sensor on your motherboard, which changes the fan speed according to the room temperature. As much as I know there is no way to do otherwise, I'm afraid.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Script to make the list of layer names.

  I wonder if someone could help me make the simple script that take the layer names and the list of their share on the A4 in canvas.

  Now I just got the screenshot of the list of Illustrator and edit it through photoshop to print, but it is too small, because each file have a approximately 25-50 layers.

  Looks like this:

  

  I tried to edit the script of John Wundes, which makes the list of the nuances, but it seems difficult for my skills.

  /////////////////////////////////////////////////////////////////
  // Render Swatch Legend v1.1 -- CS, CS2, CS3, CS4, CS5
  //>=--------------------------------------
  //
  //  This script will generate a legend of rectangles for every swatch in the main swatches palette.
  //  You can configure spacing and value display by configuring the variables at the top
  //  of the script. 
  //   update: v1.1 now tests color brightness and renders a white label if the color is dark.
  //>=--------------------------------------
  // JS code (c) copyright: John Wundes ( [email protected] ) www.wundes.com
  // copyright full text here:  http://www.wundes.com/js4ai/copyright.txt
  //
  ////////////////////////////////////////////////////////////////// 
      doc = activeDocument,
      swatches = doc.swatches,
      cols = 4,
      displayAs = "CMYKColor",  //or "RGBColor"
      rectRef=null,
      textRectRef=null,
      textRef=null,
      rgbColor=null,
      w=150;
      h=100,
      h_pad = 10,
      v_pad = 10,
      t_h_pad = 10,
      t_v_pad = 10,
      x=null,
      y=null,
      black = new GrayColor(),
      white = new GrayColor()
      ;
  
  
      black.gray = 100;
      white.gray = 0;
  
  
  activeDocument.layers[0].locked= false;
  var newGroup = doc.groupItems.add();
  newGroup.name = "NewGroup";
  newGroup.move( doc, ElementPlacement.PLACEATBEGINNING );
  
  
  for(var c=0,len=swatches.length;c<len;c++)
  {
          var swatchGroup = doc.groupItems.add();
          swatchGroup.name = swatches[c].name;
         
          x= (w+h_pad)*(c% cols);
          y=(h+v_pad)*(Math.floor((c+.01)/cols))*-1 ;
          rectRef = doc.pathItems.rectangle(y,x, w,h);
          rgbColor = swatches[c].color;
          rectRef.fillColor = rgbColor;
          textRectRef =  doc.pathItems.rectangle(y- t_v_pad,x+ t_h_pad, w-(2*t_h_pad),h-(2*t_v_pad));
          textRef = doc.textFrames.areaText(textRectRef);
          textRef.contents = swatches[c].name+ "\r" + getColorValues(swatches[c].color) ;
          textRef.textRange.fillColor = is_dark(swatches[c].color)? white : black;
          //
          rectRef.move( swatchGroup, ElementPlacement.PLACEATBEGINNING );     
          textRef.move( swatchGroup, ElementPlacement.PLACEATBEGINNING );
          swatchGroup.move( newGroup, ElementPlacement.PLACEATEND );
  }
  
  
  function getColorValues(color)
  {
          if(color.typename)
          {
              switch(color.typename)
              {
                  case "CMYKColor":
                      if(displayAs == "CMYKColor"){
                          return ([Math.floor(color.cyan),Math.floor(color.magenta),Math.floor(color.yellow),Math.floor(color.black)]);}
                      else
                      {
                          color.typename="RGBColor";
                          return  [Math.floor(color.red),Math.floor(color.green),Math.floor(color.blue)] ;
                         
                      }
                  case "RGBColor":
                     
                     if(displayAs == "CMYKColor"){
                          return rgb2cmyk(Math.floor(color.red),Math.floor(color.green),Math.floor(color.blue));
                     }else
                      {
                          return  [Math.floor(color.red),Math.floor(color.green),Math.floor(color.blue)] ;
                      }
                  case "GrayColor":
                      if(displayAs == "CMYKColor"){
                          return rgb2cmyk(Math.floor(color.gray),Math.floor(color.gray),Math.floor(color.gray));
                      }else{
                          return [Math.floor(color.gray),Math.floor(color.gray),Math.floor(color.gray)];
                      }
                  case "SpotColor":
                      return getColorValues(color.spot.color);
              }    
          }
      return "Non Standard Color Type";
  }
  function rgb2cmyk (r,g,b) {
   var computedC = 0;
   var computedM = 0;
   var computedY = 0;
   var computedK = 0;
  
  
   //remove spaces from input RGB values, convert to int
   var r = parseInt( (''+r).replace(/\s/g,''),10 ); 
   var g = parseInt( (''+g).replace(/\s/g,''),10 ); 
   var b = parseInt( (''+b).replace(/\s/g,''),10 ); 
  
  
   if ( r==null || g==null || b==null ||
       isNaN(r) || isNaN(g)|| isNaN(b) )
   {
     alert ('Please enter numeric RGB values!');
     return;
   }
   if (r<0 || g<0 || b<0 || r>255 || g>255 || b>255) {
     alert ('RGB values must be in the range 0 to 255.');
     return;
   }
  
  
   // BLACK
   if (r==0 && g==0 && b==0) {
    computedK = 1;
    return [0,0,0,1];
   }
  
  
   computedC = 1 - (r/255);
   computedM = 1 - (g/255);
   computedY = 1 - (b/255);
  
  
   var minCMY = Math.min(computedC,
                Math.min(computedM,computedY));
   computedC = (computedC - minCMY) / (1 - minCMY) ;
   computedM = (computedM - minCMY) / (1 - minCMY) ;
   computedY = (computedY - minCMY) / (1 - minCMY) ;
   computedK = minCMY;
  
  
   return [Math.floor(computedC*100),Math.floor(computedM*100),Math.floor(computedY*100),Math.floor(computedK*100)];
  }
  
  
  function is_dark(color){
         if(color.typename)
          {
              switch(color.typename)
              {
                  case "CMYKColor":
                      return (color.black>50 || (color.cyan>50 &&  color.magenta>50)) ? true : false;
                  case "RGBColor":
                      return (color.red<100  && color.green<100 ) ? true : false;
                  case "GrayColor":
                      return color.gray > 50 ? true : false;
                  case "SpotColor":
                      return is_dark(color.spot.color);
                  
                  return false;
              }
          }
  }
  

  arop16461101,

  something like that?

  var theLayers = app.activeDocument.layers;
  var str = new Array ();
  for (i = 0; i < theLayers.length; i++) {
      str.push (theLayers[i].name)
      }
  var tF = theLayers[0].textFrames.add();
  tF.contents = str.join ("\r");
  alert("new text frame with layerlist added on layer " + theLayers[0].name);
  

  Have fun

• How to make the vertical navigation bar attached to the ledge on the left browser without pinning it? Must be floating!

  Demo site works like this: http://www.sogndallodge.no/no/

  Hello

  To confirm with the workflow, there are two options:

  1. you can't normally the vertical menu, and it scrolls like scroll of the page.

  2. using the PIN: this will make the product out of the scroll of the Workflow page and stick to the location you pin the same.

  Looking at the site you provided, it is the normal workflow of the menu in use, which makes the menu items are moved to the top when you scroll to the bottom of the page.

• How can I change the speed of a video clip after which makes a smart object?

  In order to apply the same Camera Raw filter for each segment of a clip that I was going to split several times, I have converted the full clip to a smart object, applied my settings Camera Raw filter and then split the clip and remove parts.  Now, I want to do some parts of these clips slowed, but even if I right click on the right side of the layer and select 'Clear Smart Filters', all I see when I right click on the item in the Assembly are query options; I can change is no longer the speed or the audio.  Is it possible to do without having to make all cuts at first, change the speed and audio and then having to go back and convert each individual segment in a smart object and then apply the same filter of ACR for each of them?

  Once you have converted a video clip to a smart object, it is more technically a video clip. All dynamic objects are treated equally, regardless of their content. So, just as you cannot change the read speed of a smart object non-video, you can do it for a dynamic object that contains the video. But if you double-click the thumbnail to a smart object layer, you open the embedded file and you can apply settings to this file-centric video.