Which network setting is better and safer. private or public?

original title: network settimg

which network setting is better and safer. private or public?

HI Margaret,.

You can read the following article to learn more.

Choose a network location

See also:

Setting up a network home

Setting up a wireless network

Tags: Windows

Similar Questions

  • What software is better and safer to protect my Mac

    What software is better and safer to protect my Mac - OSX El Capitan 10.11.3? I was bombarded by MacKeeper advertising claiming recently that my Mac has "serious" problems and offering discounts of wholesale so that until recently the MacKeeper said my system was well protected and works well!

    MacKeeper is considered malware: never install or use it. No Web site can analyze your Mac for "problems." If your Mac does not appear no matter what strange behaviour, it is not necessary to make "clean-up" operations

  • What is the most safe, efficient, better and without or beside free VPN (Virtual Private Network), to download and what source on Windows 7 Home Premium 32-bit?

    Due to some problems, I need start using a VPN and I went to CNET research here, but I find many that are 'free' and a trial are only a purchase while others I think might also have additional files which includes the constant advertising and there's enough of this everywhere as it is and I don't want that. I searched elsewhere, too, but then I don't want to not also learn that I had also allowed some keylogger or other files hidden, unwanted and dangerous, too. So, I just need a free or almost free (by means as the purchase of any service or an object like many do now in Exchange for a service/membership number) VPN that is as safe and effective where it can be turned on or off with a simple mouse click which is low in memory consumption and easy to use.

    Not exactly what you want or what you need to do, but if you want a secure via a third party VPN tunnel, then you probably won't find much free, the old adage "you get what you pay for" would certainly apply.  I don't expect everyone to implement VPN reliable good free servers to provide free encrypted tunnels between computers of end users and to host servers all over the internet!  Perhaps a proxy server would do... or do you really need VPN?

    John

  • my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

    my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

    Hello

    As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

    http://support.Microsoft.com/kb/310353

    If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I used a time capsule in my house.  Now, I have another network put in place and would like to set my time for back ups and NOT as a WiFi capsule

    I used a time capsule in my house.  Now, I have another network put in place and would like to set my time for back ups and NOT as a WiFi capsule

    If it is possible to turn off the WiFi on the Time Capsule, which only leaves you with the option to back up your Mac (s) using a wired Ethernet cable connection between the Mac (s) and the Time Capsule.

    Are you OK with that?

  • WiFi network tells me it is not secure and it is on the public network. How can I make private?

    Original title: privacy

    My wifi network tells me it is not secure and it is on the public network. How can I make private?

    You must go into the router settings to change that.  What brand/model is your router?  If it is integrated into your modem?

    You must set a network password that prevents people without using your wireless network.

  • Why some games and other programs need to be "run as Administrator" mode in 7RC which worked fine in normal mode on 7 beta and vista?

    Why some games and other programs must be run in Admin mode in 7RC which worked fine in normal mode on 7 beta and vista?

    An example of this is the game Guild Wars (www.guildwars.com). I had problems with this with random programs.

    cbello57,
    Run as administrator may be required for some games and programs because they have a permission structure different in Vista in Windows 7 (Windows 7 and Vista are different in how to manage certain permissions).

    I suggest test you installation of the game in the program by clicking on the Setup file by clicking on "Run as administrator".

    This will sometimes solve this kind of situation because it installed the program in a State of high permission.

    This output from test and let us know your results Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I need help setting up a network between Windows Vista and Windows 7.

    original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER

    HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER

    Hello

    You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows

  • Operation error 0 x 00000709 might not be compled, check the name of the printer and make sure printer connect to network - set the default printer

    PRINTER IS SHARED ON THE NETWORK AND YOU WANT TO SET AS THE DEFAULT PRINTER...

    My Hp Deskjet 3550 Printer I have server with Windows 7 32-bit, 64-bit client

    I was first installed the printer in my client and work and shared what this wireless client PC...

    more later connected (shifted) this printer to the server and shared and want to access the client, now client pc has two settings of the printer, 1 direct connect 1 network share and I want to set default network setting... but displays error 0 x 00000709 as above. (successful print test)

    Print network image printer is displayed,

    but print the word, excel, pdf just placed directly the visible with fax and xps viewer.

    -default even impossible to define to the xps Viewer or by fax.

    Please suggest me the way out?

    Hi Amit,

    I suggest you to send your request in the TechNet Forums to improve assistance in this regard. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc

    It will be useful.

  • We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

    We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

    The PC is an installation of Windows 7 Professional 64 b NL.

    Hi,

    The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

    Kind regards

    Sheena

  • How to set the security of the network of 'AllowPromiscuous', 'MacChanges' and 'ForgedTransmits '.

    Hello

    I searched a lot about to set security for network of 'AllowPromiscuous', 'MacChanges' and 'ForgedTransmits', but present even when a problem for me.

    Can you help me?

    Thanks in advance!

    Take a look at the thread called Script to configure security on vSwitch error, there is a script to configure these settings for a vSwitch.

  • Which way is better and why?

    Hi all

    I have a table named DOC_DETAILS in which annual is NUMBER and primary key and DOC_TYPE is a type VARCHAR2 (20) and a nullable column. This table contains 40 columns altogether and have about 45 000 records. This table was used heavily in the application and now we are to avoid to display one of the doc_type (say 'DELIVERY') data to the front end application, although this type exists in the database.

    For this I intend to create a non-unique index on this column and then I here are two options with me. Please suggest me which option is preferable in terms of performance. Please consider that this table has been used widely in many procedures and views.

    Option 1:
    ======
    I can create new view as below and replace the doc_details of table name with that name from view in all areas of the application.

    CREATE or REPLACE FORCE VIEWS doc_details_vw
    AS
    SELECT *.
    OF doc_details
    WHERE doc_type! = "DELIVERY."

    Option 2:
    ======
    Open each procedure and see in which doc_details table is used and add below where appropriate at the end clause of the where clause.
    doc_type! = ' DELIVERY


    Please suggest me which option is best in performance wise. If code maintenance wise Option 1 is better, I'm trying to figure out which option is better in terms of performance.

    Thanks for reminding me on version. Here it is:
    Oracle Database 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit


    Thank you.

    Published by: TechMahi.com on September 8, 2010 12:22 AM

    Hello

    In terms of maintainability option 1 is better than if there are other conditions that can occur at a later point in time, that you can include in the view.

    If you are concerned with performance, then by replacing in the places where you use the table will be advised, in case of an increase in the volume of data the views and the query using views can degrade performance.

  • Forget a network on the iPhone and it comes back later

    Tell me if this has happened to you.

    You go to the supermarket and there's an open wifi hotspot it which does not require a key, but you don't need this WiFi now.  my iPhone connects automatically, making it difficult to receive messages because this wifi * or does not have adequate connectivity or has a sign on the page, you don't want to fool around with.  So, I want to just forget about it.  So I do, go to settings > wifi, find the network, click on the i and hit "forget network".  We forget... for now.

    I'll be back another time, and it reconnects to the network.  I have to then forget it all over again!

    I have the setting for "ask to join networks" turned off the coast.  Per the note below the setting, he said "knows networks will be attached automatically, if no known networks are available, you will need to manually select a network."  With that, a popup is constantly asking to join my clutter networks.  I want the phone automatically join my home network, work network and a few other networks like individual houses with wifi band.  I do not want to connect to this * network supermarket, never.  implies remark to me that I have to go to network settings and select a network to join it and then if it is known it will connect automatically, whereas with this on he keeps asking to connect, always.

    Something I noticed is that when I go to my wifi settings on my Mac at home and watch the networks recorded, it seems to remember all the networks I never joined including this wifi supermarket.  I empty this list, and at some point, everything comes back!  Icloud remember all my networks and do not allow me to blow out them?

    I have reset my network preferences to see if that helps, and the question comes up eventually.  I have not tried to move to a new ID from icloud, which isn't really an option at this time.

    Reflections on how to remedy this situation?

    Yes, iCloud will synchronize networks between devices, for 'help you '. You can clean it by no synchronization each device and remove then add them slowly back one by one.

  • I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

    original title: file and printer sharing problem

    I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

    Hello

    What exactly happens when you click the icon of the computer on the network map? You get the error message?

    If possible after return the screenshot of the network card that could help us help you better.

    See the bottom of the articles that might help you resolve this problem.

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Troubleshoot file and printer sharing

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

    File and printer sharing: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

    Use the network adapter to manage and troubleshoot networked devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

  • IP number looking for PSI - need help with a sql solution better and faster

    Hello

    I have a table (one) with more 1 000 000 IP addresses and numbers (the digital equivalent of the IP address)

    I have a second table (b) which contains a mapping between the ranges of the ISP and IP. The table looks like this and more contains 150 000 entries:

    BEGIN_IP_RANGE END_IP_RANGE ISP_NAME

    --------------------------   ----------------------   --------------

    600000000 700000000 ISP_X

    800000000 900000000 ISP_Y

    I'm creating a third table (c) which connects (a) IP numbers to identify the ISP from (B). The query looks like this:

    CREATE TABLE c

    AS

    Select a.IP_ADDRESS

    b.ISP_NAME

    IP_NUMBERS a, ISP_LOOKUP b lkp

    where a.IP_NUMBER between b.BEGIN_IP_RANGE and b.END_IP_RANGE

    ;

    There is no key join between the 2 tables and so I use TO search for the access provider. The performace of it's terrible and table (c) takes several hours to create.

    Does anyone have any thoughts/ideas/suggestions on how this research can be achieved by using a solution better and faster?

    Thank you very much

    Shah

    The performace of it's terrible and table (c) takes several hours to create.

    Hours what do you say?

    See if the following can help.

    Cardinalities are similar to yours. The ETG takes 7sec. :

    SQL> create table ip_numbers (ip_address, ip_number) as
      2  select cast(to_char(level,'fm099G999G999G999', 'nls_numeric_characters=,.') as varchar2(15))
      3       , level
      4  from dual
      5  connect by level <= 1000000 ;
    
    Table created.
    
    SQL> select * from ip_numbers where rownum <= 10;
    
    IP_ADDRESS       IP_NUMBER
    --------------- ----------
    000.000.000.001          1
    000.000.000.002          2
    000.000.000.003          3
    000.000.000.004          4
    000.000.000.005          5
    000.000.000.006          6
    000.000.000.007          7
    000.000.000.008          8
    000.000.000.009          9
    000.000.000.010         10
    
    10 rows selected.
    
    SQL>
    SQL> create table isp_lookup (begin_ip_range, end_ip_range, isp_name) as
      2  select 1 + (level-1)*5
      3       , level*5
      4       , cast('ISP_'||to_char(level,'fm099999') as varchar2(10))
      5  from dual
      6  connect by level <= 200000 ;
    
    Table created.
    
    SQL> select * from isp_lookup where rownum <= 10;
    
    BEGIN_IP_RANGE END_IP_RANGE ISP_NAME
    -------------- ------------ ----------
                 1            5 ISP_000001
                 6           10 ISP_000002
                11           15 ISP_000003
                16           20 ISP_000004
                21           25 ISP_000005
                26           30 ISP_000006
                31           35 ISP_000007
                36           40 ISP_000008
                41           45 ISP_000009
                46           50 ISP_000010
    
    10 rows selected.
    
    SQL> create index ip_address_number_ix on ip_numbers (ip_number);
    
    Index created.
    
    SQL> set timing on
    SQL>
    SQL> create table ip_mappings as
      2  select /*+ use_nl(a b) */
      3         a.ip_address
      4       , b.isp_name
      5  from isp_lookup b
      6       join ip_numbers a on a.ip_number between b.begin_ip_range
      7                                            and b.end_ip_range
      8  ;
    
    Table created.
    
    Elapsed: 00:00:06.94
    SQL> select count(*) from ip_mappings;
    
      COUNT(*)
    ----------
       1000000
    
    Elapsed: 00:00:01.22
    

Maybe you are looking for