Which PCI ports?

Similar Questions

• What is a MosChip program called pci ports. INF?

  I show this pci ports.inf file in my list of programs about ccleaner. I have not installed it to my knowledge what is? and can I remove it? running xp pro and ie8. Thank you.

  Which is for the PCI, based on serial port or parallel installation file Netmos product. NetMOS was later acquired by Moschip, so their names can be appear.

  If you have recently installed any PCI serial port/parallel, or some other hardware base that internally could use that, then you will get this file. Also if you already had this component in your system and updated the driver to use the latest update of windows, then also this driver will be highlighted recently.

  In my opinion, is not a dangerous file and you can continue to use it safely.

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• Compaq DC7900 small form facto: PCI port query

  Hello

  I just got my hands on a computer desktop HP 7900 with Vista 32 bit. The PCI shows a triangle with yellow exclamation point and I have no idea if it is broken or needs of drivers, etc. If she needs a driver, can someone tell me where I would be able to download it, please? In addition, how would I know if the port is broken? Please take it easy because I'm not too confident with land navigation computer.

  Thanks in advance.

  Hello:

  You need the driver for this device...

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  File name: sp41283.exe

• Need a PCIe Port of the 2 series for my HP Windows 8.1 computer, any ideas?

  I need to find a serial number PCIe 2Port adapter for my HP with Windows 8.1 computer.

  Like this?

  http://www.Amazon.com/PCI-E-express-serial-controller-adapter/DP/B00FH7WZ86/ref=sr_1_5?ie=UTF8&QID=1402749180&SR=8-5&keywords=PCIe+X1+dual+serial+port+adapter

  I can't tell if you can get the serial ports configured Windows 8.1. Here is an article that may be of interest:

  http://www.charleswilde.com/Windows-8-1-includes-support-for-serial-ports/

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Sandy Bridge (mobo Cougar Point) on p6780t - which SATA ports?

  There are 6 SATA "ports" in my HP p6780t, and I understand that only four SATA II (Rev 2.0, 3.0 Gbps) ports that are affected by the problem of recall of Cougar Point.  On the motherboard, I see four SATA connectors to real (labeled ports 1-4: blue, white, clear, and orange, respectively) and two empty spaces reserved (ports 5 and 6).  Anyone know which ports are ports SATA III (Rev 3.0, 6.0 Gbit/s)?

  Since I do not plan to use more than two connectors, one for the hard drive and the other for the optical drive, I would rather identify the ports assigned to go through the hassle of return computers.

  For clarity, I will use the physical labels located on the motherboard.  (Physical tags are turned off by how they are numbered in the software and in the diagrams).

  According to the usefulness of Gigabyte and patterns, both good SATA III ports are those who is physically marked 'SATA 1' and ' SATA 2 "- these are two ports, turned to the side to hard drives and are dark blue and beige and white color respectively.". "  Out of the box, all you have to do is to move the connection from the DVD of the 'SATA 3' (light blue) port for the "port SATA 2."(beige/blanc) ".   Cable is a little tense, but there is just enough length to it.

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• Windows 7 drivers for serial port PCI compatible for ThinkCentre M57p (6088)

  The weekend I upgraded my Lenovo M57p (model 6088) to Windows 7 and encountered the problem in which the drivers for the following were not installed and could not be located...

  PCI Simple Communications controller

  PCI serial port

  The problem here is that the AMT/drivers available for this problem are not compatible for PCs running Windows Vista, XP or 2000 but do not go as far to cover the problem created in Windows 7...

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-73601

  Can anyone suggest what I can do to fix this?

  I noticed that Lenovo have beta versions available these drivers for the Thinkpads but for some reason, none of the drivers are available for the ThinkCentres.

  I don't understand what I am sure to be a major problem when others will upgrade to Windows 7...

  Does anyone know when Lenovo plan to get Windows 7 compatible AMT/drivers for the ThinkCentres?

  Really need help because my PCI and PCIe ports do not work, so my sound card...

  It seems that Intel AMT:

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-68783#AMT

• 15 - ay013nr: how to tell which USB 3.0 port when they are not blue?

  How am I supposed to say which USB port is my port 3.0? I thought they were supposed to be blue?

  Laptop model # 15 - ay013nr

  Thank you

  Hello:

  See Chapter 2, page 6 of the laptop user's guide for the location of the port usb3.

  http://h10032.www1.HP.com/CTG/manual/c05114176

• Please help me identify which port is the port of USB 3.0 HP Compaq 15 - s001TU (G8D87PA)

  Hello Experts,

  Today, I got my 15-s001TU (G8D87PA) computer laptop HP Compaq. First of all thanks to HP & manufacturer to create this wonderful product. It seems absolutely stunning after opening the box. I opted for free Dos version, which equals no BONES.

  In any case I use it for 7 hours with latest version of Ubuntu 14.04 - 1 LTS and experinced is great. But I can't able to identify which USB port is a USB 3.0 among all available USB ports. In this model, there are three USB ports available - two located right off DVD player and one located next to left hand next to the LAN port and all are in black color.

  Now the litarature provided with this laptop is very in the Appendix, so anyone who can let me know which one is USB 3.0, it will be very useful.

  Thanks for the help.

  ArijitB14 wrote:
  

  Hello Experts,

  Today, I got my 15-s001TU (G8D87PA) computer laptop HP Compaq. First of all thanks to HP & manufacturer to create this wonderful product. It seems absolutely stunning after opening the box. I opted for free Dos version, which equals no BONES.

  In any case I use it for 7 hours with latest version of Ubuntu 14.04 - 1 LTS and experinced is great. But I can't able to identify which USB port is a USB 3.0 among all available USB ports. In this model, there are three USB ports available - two located right off DVD player and one located next to left hand next to the LAN port and all are in black color.

  Now the litarature provided with this laptop is very in the Appendix, so anyone who can let me know which one is USB 3.0, it will be very useful.

  Thanks for the help.

  Page 6 and 7 through 15 HP Notebook PC Compaq 15 Notebook PC Maintenance and Service of Guide

  The single USB port on the left side is the 3.0 a

  Kind regards

• Drivers of IEEE 1284 printer controller IO parallel PCI card card Port DB25 25-pin

  I'm looking for drivers to be able to use the port parallel thi to my computer.  My opus system is vista.

  Hi Dee W,

  1. what exactly happens when you connect e/s PCI Parallel Port?

  2. What is the brand and model of the PCI Port of IO Parallels?

  3. you use this to connect to any printer?

  4. What is the brand and model of the printer?

  Usually, when you insert the card in the system, Windows will automatically install the generic drivers.

  For more information, see the articles:

  Looking for drivers

  If this is not the case or you get errors at the time of the connection of this card, you need to contact the card manufacturer to install the drivers.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• HP DV6t (B6C70AV) ENVY: which is 3.o usb port in my book!

  Hey, can you tell me which is port 3.o. Until you say check SS or 3.o brand (I've already strained me eye seeks not), he did not, so you can tell me if my laptop is bluetooth compatible? If you could provide the link of specification for my product, it would be great.

  Concerning

  See pages 18 and 19 of the manual here for a diagram.

  Manual

  The only usb port that isn't 3.0 is more backward on the right side next to the power adapter plug.

  Yours is a CTO (Custom custom) model and may or may not have Bluetooth as it is configurable by the user and bluetooth would have been an added value option.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Which physical network my virtual machine port is connected to?

  Hi all

  We have several ESXs with classic vSwitches or dVswitches. All of them have several physical ports (classic NIC teaming configurations, all cards are active).  Different virtual machines are connected to these switches (a vnic by VM).

  Is there a way to identify which physical port every single VM is connected to? Of course, I have no access the physical switches...

  Thanks for your advice.

  Franck

  You can this output to esxtop commands (press 'n') in vSphere 4. Thank you

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Minitour dc5100 - installation nvidia geforce 6200 PCI - problem

  Hello
  
  I have an old HP Compaq DC5100 minitour, and I wanted to put in a graphics card instead of using the onboard gfx

  as windows kept alert me that I was running on system resources, and video memory.
  
  So after hunting around the net for a PCI card (PCI-e not that I do not have a slot on the motherboard for it)

  which are very few and far between, but I managed to find a Nvidia Geforce 6200 256 MB PCI card: Nvidia Geforce 6200
  That I jumped into one of the PCI free slots on the motherboard and has pulled up the PC... after a second fans
  closed and the PC started her off 4 short beeps (with a red light flashing in time with the beeps located under)

  the power button on the front of the pc), then stopped for a few seconds and then repeat the 4 short beeps.
  and then continued to do this until I turned off the machine.
  
  So I took then the video card back and put it in the second PCI slot, but the same thing happens again.

  Now, I had to take the graphics card and just plugged my monitor on the port of gfx on board.

  Does anyone know why this graphics card stop the pc to start?

  Or is there something I need to do to get it working?
  
  FOR INFO. I can't even get into the BIOS, so impossible to verify anything in there.

  Also, here is a picture of my motherboard and the two PCI ports:

  

  I had a quick glance for the beep codes but cannot determine what BIOS mine is in the list here:
  Beep codes HP

  The only information I could get from my pc has been;

  [Information BIOS]
  
   Provider string: Hewlett-Packard
  
  Version string: 786 2 v01.07
  
    Release date: 25/08/2005
  
        Size of the ROM: 512 KB
  
  [Information on motherboard]
  
    Manufacturer: Hewlett-Packard
  
  Product range: 09E0h
  
  Version string:
  
   Serial number: CZC6071MT0

  Good news!

  After taking all the USB devices on my machine and try again once I had no joy as it is the same with the 4 beeps and the PC shut down.

  So I headed upwards in my attic and after opening 3 old PC I got lucky and found an another PSU ATX which had the same dimensions and was a high-end with maximum capacity of 640 watts, so I it inverted and put the graphics card back in and connected USB devices , and then press the power button...... ..  .  This time there was no beep and the computer =)
  
  This is certainly the graphics card needed more energy than the 300 Watt who was originally in the machine.
  
  Thanks again for your help to solve this problem.
  
  Kind regards
  
  Mark