Which ports on an Inspiron 17R SE7720 are USB 3.0 and USB 2.0?

Similar Questions

• Install Windows 7 Pro on new Inspiron 17R occurs disk hard error message and pilot application

  I want to install Win 7 pro 64 on my Inspiron 17r, which came with Win 8 House.  I use a Dell Win 7 pro 64 DVD reinstallion I bought on Ebay.  He came in a sealed envelope and included a (supposedly) used United Nations w COA / product key, barcode, etc..  I would like, if possible, to install Win 7 in the same partition that currently has win 8 and leave the other partitions several alone to keep the programs presented by Dell.  The hard drive is a SATA 1 TB drive 5400 RPM with a map of mSATA SSDR 32 G, Dell build sheet items 340-9594 and 342-4360.

  When I boot with Win 7 DVD and try to install everything goes well for a while.  Then when the screen "Where do you want to install windows?" rises no disks or partitions are displayed and the following error message is displayed at the bottom of the screen: "no hard disk found.  "Click on load a driver to provide a driver for installing mass storage.  Click on load a driver generates a request to insert the media containing the driver files, which of course I did not.

  So where can I find this driver file?

  Thank you

  So, if you have not already install 7zip (http://7-zip.org/download.html) get the .msi to 32 or 64 bit depending on your version of Windows.

  Download: http://ftp.dell.com/FOLDER01144200M/1/Serial-ATA_Driver_VWCH1_WN_11.6.0.1030_A02.EXE

  Once downloaded extract the file with 7zip.

  

  Click with the right button on the serial number - ATA_Driver_VWCH1_WN_11.6.0.1030_A02. EXE and select Extract to «»

  This will make a folder called Serial - ATA_Driver_VWCH1_WN_11.6.0.1030_A02. EXE

  

  In this folder are f6flpy SATA drivers labeled such as they appear on floppy disks.

  Copy the f6flpy - x 64 (64-bit) to a USB port, when asked to load the drivers select the USB port and this folder.

• Inspiron 17R SE 7720 - Audio from headphones and speakers

  When I plug my headphones, sound still comes from my speakers.

  The popup asking what device I plugged is no - longer everytime I plug my speakers - but it does to the microphone socket.

  It is difficult to say 100% for you that it is a hardware failure, because it is not a diagnostic test. If you Win10 you could go back to the operating system in which decision worked and see if it still works here.

  If you have the original operating system came with the laptop, you can perform a recovery of the system (original return the laptop to the factory setting). This will be the fix or confirm that there is a hardware failure.

  To the best of my knowledge your model of laptop doesn't have a replaceable audio port circuit. If I'm wrong on this subject you will need to replace the motherboard to replace the Jack unless you can perform work on the motherboard. You could qualify for something being folded.

  A simple solution is to get a USB input audio cheap and use it for headset and your internal audio system when you want that the speakers to play.

• I need to know which ports are pregnant?

  I need to know which ports are for speakers?

  Hello

  Please, do NOT post several messages to the same question. Look at this:

  

  7. audio: Central/subwoofer
  8. audio: rear speaker output
  9. audio: line (light blue)
  10. audio: output line (lime)
  11. audio: Microphone (Pink)
  12. audio: side Speaker Out (gray)

  Kind regards.

• 7.6 quest RDP client, which ports are

  I have a site to site VPN tunnel. I use terminal Server and vWorkspace servers to connect to these servers. While using v7.2 vWorkspace client on the firewall I allowed the port 3389 (RDP) and 8080 (broker vWorkspace) through the VPN tunnel

  everything worked well. I've updated the servers and clients to 7.6, since then the vWorkspace client does not connect to the terminal Server farm. I opened the tunnel to allow all traffic and can connect.

  What are the ports would be 7.6 client use other then 3389 and 8080?

  Hello David,.

  The problem you described seems to me that you now EOP active master, this is the default option. When you use this feature, an additional control port is used, it usually comes to port 3390. You can check the settings in the vWorkspace Console as shown in the screenshot below.

  

  With the settings on my screenshot EOP master would use port 3390 as a control channel. If you have the "pass-through mode enable RDP unchecked you can specify an alternate port number, by default, it would be 33389.»

  

  Check the setting of your vWorkspace Console, then open the firewall for the relevant port.

  I hope this helps.

  David

• Audio Inspiron 17R 5720 problem

  Hello

  I have an inspiron 17r laptop 5720 with which I am facing audio problems. Whenever I start it up, the audio does not work on the speakers and headphones. To resolve this problem, I reinstall the drivers by uninstalling the audio drivers in Device Manager, then restart the system.

  The audio works after the restart as long as I continue to use it all the time. If I stop audio playback for awhile and then try to play again, it does not work. I have to repeat the same procedure to uninstall the drivers + restart to get it working again.

  How can I solve this problem? Below are the drivers installed.

  Definition Hiigh CODEC IDT by IDT (6.10.0.6426)

  Audio device high definition from Microsoft (6.3.9600.16384)

  I tried dell support where it scans my system to determine if any driver download is necessary. All this turns out to be good. In addition, in the Device Manager, it says that the drivers are up to date. I am running windows 8.1 (upgrade of windows 8 from the "Bank") and is updated regularly!

  Help, please!

  Thank you.

  Hello. Go to the Device Manager and right-click on the IDT High Definition Audio Codec and choose to uninstall the driver. Check the box to delete the files. When you restart, you will use the native Windows audio driver (high definition Audio device). If the problem persists with the native driver then it might be a hardware problem.

  In order to exclude the hardware failure, perform a recovery of the system. If the problem immediately after a system recovery, so it's the hardware failure.

• Inspiron 17R SE (7720) upgrade screen resolution?

  Hello
  I have a 'special edition of the Inspiron 17R"(serial number: DCC2DT1) and I used it for about 2 and a half years.
  Not once in that time has stopped working, I'm very happy with it and I would update some components and I hope to continue to use it for a few years.

  I am looking to change/update the screen 1600 x 900 on a Full HD 1920 x 1080 display.
  My main question here is, if this is possible and will not be a problem, and if I could use first put the other components of the laptop?

  I would also like to upgrade the HDD for an SSD and a day later the Intel i7 Intel i5 processor. Is this what I need to know before I Exchange/upgrade components?

  Thanks for reading.

  To upgrade the display panel, you must also replace the harness of the display - one that comes with the lower panel of the resolution will not work with the FHD display.

  SSD upgrade will not be a problem

  Updates are possible with this model (it is the last of Intel Mobile processors, which is sold in the form of half-bridge, removable) - you will need an Ivy Bridge CPU.  Also check your power adapter - 90 w does not have an i7.  You need a minimum of 130 W power adapter to run an i7 CPU.

• The battery life for inspiron 17r special edition or what to buy for College?

  I am looking to buy a high mid range laptop for College. I need a laptop that can handle games, in addition to other activities of the College. I've narrowed my search up to three computers different portable all pretty much the same price, and now I don't know that we choose. My three choices are the occasional 17r, the xps 15 Inspiron and alienware m14x.

  I'm leaning toward the inspiron because its cheaper than the other two and still a great internals. My only concern is the battery life. The battery is low, and I guess with the i7 and the screen 17 inch hd that the battery of the 17r will be terrible. I need something that's going to allow me to study on campus, if need is and be able to handle the TRIPS would be nice. So my question is... Are their any availble upgraded battery for editing special 17r? I saw a battery 9 cells, but it is not listed specifically as compatible with the Edition special 17r, just a 17r. If there is not, are their suggestions for greater autonomy on the road (without the usual stuff like processes of cutting and dimming of the screen).

  Also, on a related note, the inspiron 17r will be able to manage the game well? I don't need a power plant, but I want something that can handle new games for the next two years even if I have to lower the settings as the games become more intense.

  Hi dtruax,

  After sending two children to College, I went through this twice buying decision. The first thing I will say is that you're probably not going to carry your laptop on campus, almost as much as you think you will. And all equipped with gaps of a computer on campus, 17 "laptop will become quickly apparent. For the most part he'll be back at home. So the battery life is not as important as you might think.

  Regarding the size, two of my students, who initially leaned over to a 17 "machine, were much more happy with a smaller screen (14" for my son, 15 "for my daughter), compared to their classmates with computers laptops 17".

  The three models, the XPS is going to be the best for gaming. But I go back to the advice we have been given. Spend a little less on the laptop and a little more to get a 4 year complete care warranty. Many universities offer a 4 year warranty free and tech support if you buy through their Bookstore, which is what we did.

• Inspiron 17R-N7010 new SSD installed, now I need Windows 7 operating system installation CD.

  Hi guys,.

  So my HDD on my Inspiron 17R-N7010 completely stock * on me last week, so I just gritted my teeth and just bought I have completely new SDS and installed last night... now, however, I need to reinstall the operating system. Problem is that when I bought the laptop, Windows 7 is pre-installed, so I don't have to drive to it. How can I do to get an installation disc, and how much it will cost if I can get my laptop up and running again? It's an outdated OS and the laptop is almost 6 years, I can't imagine which costs a lot. There is also a store Microsoft directly by me, can I go ahead and buy the disc of Windows 7 OS you think?

  In addition, the original HARD drive was 640GO and this new SSD is 500 GB, so the recovery disks that I made when I got the laptop are unnecessary since Dell Datasafe Recovery (or whatever we call it) keeps telling me the hard drive needs to at least 590GB of space (or something similar along this message). The smallest space on the SSD isn't going to be a problem with the laptop in general or during installation of operating system Windows 7 is?

  You will need to call Dell - they usually sell a set of recovery media for about $25 in the United States, the United Kingdom and the Canada.

• WiDi on Inspiron 17R SE

  I see there are several messages about WiDi, but I think the General view is that it should work on the system I bought (Inspiron 17R SE).

  Unfortunately, it does not work on mine.

  When you install the driver recommended WiDi, Setup fails with t he message "platform is not compatible with Intel WiDi or the application is in use.

  I've deleted and reinstalled to be sure, but the same problem.

  I also tried to install the driver of Windows 7, but trying to run that it fails when you try to load a .dll file.

  I think I have all the latest drivers.

  Suggestions please as to how to get this to work - it is a requirement for me.

  Thank you.

  After spending many hours miserable installing and uninstalling software and drivers, I am pleased to announce that WiDi is alive and well on my system.

  The information provided on the site Web Intel eventually led me to a successful installation.

  There were three special pages which has proved to be invaluable and can help others with a similar problem.

  www.Intel.com/.../instl_confg

  www.intel.com/.../CS-033843.htm

  www.intel.com/.../CS-031109.htm

• Please help me identify which port is the port of USB 3.0 HP Compaq 15 - s001TU (G8D87PA)

  Hello Experts,

  Today, I got my 15-s001TU (G8D87PA) computer laptop HP Compaq. First of all thanks to HP & manufacturer to create this wonderful product. It seems absolutely stunning after opening the box. I opted for free Dos version, which equals no BONES.

  In any case I use it for 7 hours with latest version of Ubuntu 14.04 - 1 LTS and experinced is great. But I can't able to identify which USB port is a USB 3.0 among all available USB ports. In this model, there are three USB ports available - two located right off DVD player and one located next to left hand next to the LAN port and all are in black color.

  Now the litarature provided with this laptop is very in the Appendix, so anyone who can let me know which one is USB 3.0, it will be very useful.

  Thanks for the help.

  ArijitB14 wrote:
  

  Hello Experts,

  Today, I got my 15-s001TU (G8D87PA) computer laptop HP Compaq. First of all thanks to HP & manufacturer to create this wonderful product. It seems absolutely stunning after opening the box. I opted for free Dos version, which equals no BONES.

  In any case I use it for 7 hours with latest version of Ubuntu 14.04 - 1 LTS and experinced is great. But I can't able to identify which USB port is a USB 3.0 among all available USB ports. In this model, there are three USB ports available - two located right off DVD player and one located next to left hand next to the LAN port and all are in black color.

  Now the litarature provided with this laptop is very in the Appendix, so anyone who can let me know which one is USB 3.0, it will be very useful.

  Thanks for the help.

  Page 6 and 7 through 15 HP Notebook PC Compaq 15 Notebook PC Maintenance and Service of Guide

  The single USB port on the left side is the 3.0 a

  Kind regards

• EN104 - Hub IP is on which Port does learn?

  We want to use a Hub EN104 to monitor our network traffic and analyze packets with Wireshark.

  We connected the hub between two network devices and connected a laptop with the hub so that the hub can do what it is suppoesed to do and send all packages to all connected devices.

  One day, he worked, the next day, he doesn't.

  We tried everything from the update for Wireshark to unplug all cables from the Hub and plug them back in a different order.

  The only thing that helped was to move the laptop to another has never been connected to the hub.

  When we reconnected the first laptop on the fouth port it did not work either.

  It's as if the hub learns what address Mac is connected to which Ip address - and on which Port, so that it does not work as a true hub all the time.

  * IMPORTANT NOTICE *.

  Until someone complains, it's 100% legal, because we have two devices and we wrote at the time software that send data via the network cable.

  In a machine that is running on a site of our customers, we have difficulties to receive the data we sent in the correct order, if we are setting up a hub and a laptop allows to scan the network to our customers in order to find the part of the network that is causing the loss of information.

  Thanks in advance

  A brief update on the subject,

  We understood that he works in system properly when we do not given DHCP addresses but use addresses that are resolved in all the devices that are connected to the hub.

  He works correctly. If we use devices that have addresses given by DHCP, it ceases to function as a hub out of control, sometimes it works for an hour, sometimes more, and most of the time less. It is always searched data, but not to all devices as it should do.

  The topic can be closed, we found a solution.

  Thanks to all contributors.

• How to burn an ISO (which is a bootable CD/DVD) to a USB port?

  How to burn an ISO (which is a bootable CD/DVD) to a USB port?

  I usually burn ISO files bootable CD or DVD with NERO6, 7.   Now, I would like to burn on a USB key.

  Ideas on a good and stable program?

  I. - Download the software that makes bootable USB drives the ISO. WinToFlash http://www.bing.com/search?q=+WinToFlash+&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> and Unetbootin http://www.bing.com/search?q=UNetbootin&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> are the two options included in the section resources. The software will automatically convert iso files on a USB drive and make it bootable.

  II. - open and install your chosen software. The software will be an installation clicks where pressing a couple of times then you have ready to go.

  III. - Plug the USB and check what drive it is listed as in 'my computer '.

  IV. - Launch your chosen software and specify paths. There will be two sections to choose from. Look for the converted ISO file in the download or the source article. For the second section, select the path or the destination (USB key) is transferred to ISO.

  V. - click 'Next' and let the program create a USB bootable ISO file. It may take some time depending on the size of the ISO file. When the process is finished, you have a bootable USB key with your ISO file.

  UTC/GMT is 05:13 Sunday, December 18, 2011

• How do I clone the mSATA drive in my Inspiron 17R 7720?

  I have two almost identical Inspiron 17R laptop 7720; one that I bought new from Dell 4 years and one that I bought used a couple of weeks. Both have identical hardware with the following exceptions: my original has a Core i7 processor and a 32 GB mSATA drive, while the new has a Core i5 processor and no mSATA drive. Hard drives, video, memory, etc. are all the same on both computers.

  I bought a car identical mSATA for the new computer and try to clone the mSATA and the old computer's HARD drive, so I have two identical computers. I tried cloning of disks using Macrium Reflect. Cloned HARD drive successfully, but reflects only concludes a 8 GB partition not formatted on the old disk mSATA, not all 32GB. I cloned the new drive mSATA and tried in my old computer it correctly identified the drive but it was not valid, said RAID 0 volume and asked me to change my drive to non-RAID configuration.

  Any thoughts on how I can clone the old mSATA disc correctly to the new?

  You can't clone this player.  What you need to do is set up the Intel IRST again.

  www.Dell.com/.../en

• Subwoofer on Inspiron 17r 7720 IS not working is not in win10

  I installed windows on my Dell Inspiron 17r SE 7720 10, but now the sound is very flat, volume is soft and the subwoofer stopped working. I looked on the Dell site, but there don't seem to be audio drivers available for this notebook for windows 10 reference drivers. Realtek also do not resolve the problem.

  Is there a solution for this?

  Hello. Has anyone tried installing the audio driver? There is no audio driver for the Inspiron 17R SE 7720 Win10, then you will need to use the audio driver IDT for Win8.1 and install it using compatibility mode.

  1. download and save the driver to your desktop.
  2. double-click the new icon on the desktop to extract (unzip) the files of the driver.
  3. the wizard of the extractor will create a new folder for the driver files. It will be located at the "c:\dell\drivers\xxxxxx". Note the exact location that the wizard creates.
  4. If the driver begins to install automatically, stop (cancel) installation.
  5. search for the driver files on the hard drive (the location you noted).
  6. find the file "setup.exe".
  7. right click on setup.exe to open the context menu.
  8. Select Properties.
  9. Select the Compatibility tab.
  10. check the box "run this program in compatibility mode for"... WIN8.1.

  If installing the driver IDT does not work then I suggest you return the laptop in the operating system in which the audio worked properly, unless there is a compelling reason to have the Win10 operating system. Dell does not have to put any new audio drivers for the Inspiron 17R SE 7720 and Win10 audio management in the notebook models where the audio is not supported is hardly encouraging.