Which printer works with 10.6.8, snow leopard and more advanced:

Similar Questions

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• How to make the printer work with the new Windows 7 laptop?

  can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!

  Thank you
  need help with my printer

  Hi gingerbabe001,

  To set up and install your printer, see the link below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4062&product=1153754&sw_lang

  Good luck.

• X 1 PCI-E 1000 Mbps cards exist which will work with ESX 3.5

  Hello

  I currently have two ethernet Intel Pro GT cards, which work well in ESX 3.5. I wonder if you do PCI-E x 1 1000 Mbps cards available which will work with ESX 3.5? All my PCI slots regular are met, namely.

  Thank you

  Hi, take a look at the Intel Pro1000PT series, the single nic will work on a x 1 bus whilest the dual nic and quad variants will run on a 4 x / 8 x / bus 16 x and are on the HCL, just search under the e/s intel and its high - the only weird is that the HCL it graphic adapter States PT , Dual PT and PT quad, but when you go into the details for the PT adapter (which you'd think was the only port), it says its got 2 ports...

  Thank you

  Neil

• Cannot scan with Photosmart C6280 with Mac OS x Snow Leopard.

  When I try to scan with my Mac, I get a scanner not found error.  I am able to print.  When I access the HP utility, it shows the printer in the installed column but it shows a Red House beside her and will not let me access it. The printer is connected to an Apple Airport Extreme, via an ethernet cable, and the airport is linked via a USB cable to the computer.

  I guess you mean that the printer and the Mac are connected to the router with Ethernet Airport?

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Please tell me how to make my laptop and printer work together. I have Windows XP and a series of HP Office Jet Pro K8600

  Please tell me how to make my laptop and my printer work together.  I have Windows XP and a HP Office Jet Pro K8600 Series

  The printer is turned on, power works fine, the paper is in the machine, not jams, computer is very good, I'm just not getting no response from the printer

  Hello

  Uninstall the printer, and then reinstall it by using the latest drivers from HP.

  You will find also find on the site of HP troubleshooting steps, once you enter your printer model number.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.

• Recently I install Adobe Pagemaker 7.0, but it is not my system hindi font visible just like the series Devi ismayl, KBC Serise etc. these fonts are is visible and working with Adobe photoshop, corel, office etc. and works well. Veuileez solve this proble

  Recently I install Adobe Pagemaker 7.0, but it is not my system hindi font visible just like the series Devi ismayl, KBC Serise etc. these fonts are is visible and working with Adobe photoshop, corel, office etc. and works well. Veuileez solve this problem as soon as possible.

  Can you also please check whether this version is still appropriate for your operating system?

  See: Adobe - Pagemaker 7: System requirements

  The system configuration required

  Windows

  • Microsoft® Windows NT® 4.0 with Service Pack 6, Windows® 2000 Professional with Service Pack 2, Windows XP Professional or home edition

  It is not recommended to run this software on any Mac modern like Windows 7 or 10.

  Good luck!

• Work with Chinese characters: how to paste and edit them like sentences; not as individual images?

  Work with Chinese characters: how to paste and edit them like sentences; not as individual images?

  In 2004, it's far more detailed response, I could find: http://en.allexperts.com/q/Adobe-Illustrator-1027/FONTS-display-problem-Adobe.htm, but it is this solution really even more up to date?

  Is it possible at all to work with Chinese characters, if I don't have the Chinese version of Illustrator? (http://www.proz.com/forum/dtp_desktop_publishing/221125-chinese_in_indesign.html)

  The police you see that is applied when you paste? It seems, by default, illustrator assigns Kosuka Gothic Pr6N. try a different font as Adobe Heiti Std R.

• I just pass the parameters and software my PowerBook has a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install.

  I just upgraded the software and settings, include CC, of my PowerBook for a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install. I try because whenever I restar keep bothering asking for installation, (by the way, the link is not updated). You will appreciate your help.

  never migrate adobe software.  It must be properly installed.

  Uninstall all the programs of cc you can, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• CS2 will work on mac 10.6, snow leopard?

  CS2 will work on mac 10.6, snow leopard?

  http://snowleopard.wikidot.com/

• IPhoto 9.2.3 on Snow Leopard and direct upgrade to El captain

  Hi guys,.

  I'm under iPhoto 9.2.3 on Snow Leopard and want to move to El captain.

  I have read that I need iPhoto 9.6.1 until I upgrade to El Captain so I still want to use iPhoto.

  Problem is that 9.2.3 is the latest available version of iPhoto on Snow Leopard, so I'm stuck here somehow.

  I had a quick glance under the items purchased on the app store, but since my iLife came with a DVD and therefore not bought for download, I guess it will never reveal under the items purchased.

  So I also assume that as soon as I upgrade to El Captain, iPhoto does not open and I won't be able to update iPhoto to 9.6.1

  Does anyone have an idea on how I could always upgrade level to El captain and stick to iPhoto?

  Thank you!

  A member of the family has iPhoto installed 9.6.1, so they could install it for you on your Mac?

  Otherwise, you can refresh only with the help of the Support App Store, but they are very reluctant to help if iPhoto has not been purchased on the App Store.

  One way to continue to work with iPhoto would be to create a clone your mac to an external drive bootable and boot into snow leopard since the external hard drive, if you wish to continue using iPhoto.

  But in the long run, switch to Photos for Mac.  Apple improves Photos for Mac with each update of the system.  iPhoto is becoming less and less supported. Maps and locations are no longer supported in iPhoto 9.4.3 or earlier, Apple is more does not support printing for iPhoto projects, latest applications can appear more the iPhoto library in the media browser.

• Upgrade to Snow Leopard and Time Machine

  Hello. I found this topic in an old topic, but it has been blocked so I couldn't answer. Here is a new.

  I have a fairly old MacBook Pro... mid-2007. Provided with Tiger. Upgrade to Leopard in 2010 or more. I want to now upgrade to Snow Leopard and make a complete installation where I have completely clean the existing hard drive.

  I did the Time Machine backups for about four years on my external hard drive. When I install Snow Leopard on my MBP, I can just do simple drag and drop the kind of things from my external hard drive on the hard drive of the MBP?

  For example, once I've erased the hard disk of the MBP and do a new installation of Snow Leopard, can I then connect my external hard drive, open a certain folder and something like Pages slide window of the HD to the window of the Applications on my MBP?

  Thank you!

  Drag and Drop could be a problem, because these applications and files will not be usable unless they are properly updated. It would be better to have a clean install of Snow Leopard and then use the Migration Assistant to transfer files from your Time Machine backup. Note that Snow Leopard will ship with the Apple apps so they do not need to be transferred. You can check with 3rd party developers to ensure the compatibility of their software and upgrade options.

  It is with the Migration Wizard:

  Move your content to a new Mac - Apple Support

  This article is useful, but a lot of your time, because he doesn't use Migration Wizard:

  OS X: manually the Data Migration from another Mac - Apple Support

• I'm running on snow leopard and upgrade to el capitan. If I just upgrade, my data will be safe after finished or need to recover again?

  I'm running on snow leopard and upgrade to el capitan. If I just update without backup (because I have no external HARD disk) data will generally be safe / normal after all as we updated iOS iPhone via OTA or need to recover the data again whenever we have updated to Mac OS?

  If all goes to plan, your data will be safe.  At times things go bad for a backup is indispensable if you value your data.

  Ciao.

• With the help of direct Record capability with unity Version 4.0 (5) and more

  Hi all

  A quick!

  Wanted to confirm if the below mentioned documentation - Live recording capability with unity Version 4.0 (5) and more - made this function - still exists and is there a valid documentation for this particular version.

  Would appreciate a quick confirmation on the same.

  No matter what level join you... get better never stops - Sachin Tendulkar

  Hi Abhishek,

  Hope everything goes well

  Yes, recording Live is always supported;

  Configuration of direct recording in Cisco Unity Connection 9.x

  http://www.Cisco.com/en/us/docs/voice_ip_comm/connection/9x/Administration/Guide/9xcucsag170.html#wp1071465

  Offering direct recording in Cisco Unity 8.x

  http://www.Cisco.com/en/us/docs/voice_ip_comm/unity/8X/Administration/Guide/8xcusag140.html#wp1057024

  See you soon!

  Rob

  "Why don't the best things always go away."

  -The band