Which side is the usb port 3 on a 2015 macbook pro with the retina display?

Similar Questions

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Yellow/green Cast in Photoshop CS6 after calibration of the Retina display

  I use a MacBook Pro with screen Retina and color eyes display Pro with colored eyes to calibrate my monitor.  It works perfectly, except that when I open Photoshop (or even the Adobe updater now), the entire screen goes clear green / yellow!  See the attached photo, it is quite nuts and give you a headache after a few seconds to look at it.  I tried the turn of thought of treatment GPU, it would conflict with that and a dozen other small attempts to get rid of him and nothing!  I'm finally back to calibration by default for the Retina display, and it's not that bad, but obviously not yet calibrated.  I can't for the life of me find someone else who has this problem, I'm crazy?

  Thank you!

  

  Well, then, I really only reported it because I thought that maybe in the future someone else would have encountered the same problem.  I found the solution!  Color eyes Display Pro spits like a version 4 ICC profile and the LABORATORY made 16-bit file.  It turns out that is not compatible in some way (would love and technology Adobe answer for me is - what GPU or something else listen here?).  Fortunately, there is an option to change color eyes Display Pro.  I changed it to "Matrix based" instead and voila!  Here is a screenshot from wherever the option is, just click on "profile"parameter and change the second drop at the base of the matrix.  ICC v2 has not worked for me either, any program that crashed.

  

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

  This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

  Hi Alan,

  Thanks for posting in the Microsoft Community.

  I understand you are trying to backup the data on external hard drive since you replace the hard drive.

  I will definitely help you with this.

  Please visit the links; This should help you in files and backup files.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

  http://support.Microsoft.com/kb/308422

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• Should what version of Firefox I download on my new MacBook Pro with Intel Core i7 processor? Where can I get it so that I can see the exact version?

  I just bought the last laptop MacBook Pro with the Intel Core i7. I would like to know which version of Firefox to download on it.
  What is the latest version and how to find? I know it is 3.6 but 3.6.13? OU.14? OU.15? Or what? I don't want to spoil, so I'm asking for advice. Is there someone out there who can help you?

  http://www.Mozilla.com/en-us/Firefox/

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Problems with the retina display resolution

  Hello

  I have a macbook pro (2015) with a retina display 15 "that I can't seem to adjust to the correct resolution. The native resolution, as I understand it, is supposed to be 2880 x 1800. I can't see my resolution when I put its "default value to display" in system preferences, but if I change it to "scaling", it is said that the default resolution "looks like 1440 x 900". Even when I go to the maximum the space option, it doesn't give me that 'looks at 1920 x 1200.

  When I up resolutions for the screens of the retina, it looks like the scale at 1440 x 900 option is supposed not to be available for the 13 "display.

  

  

  The native resolution is not supposed to be available in the options when the scale is selected. What you need is respectful of the eye from the App Store, which will increase the resolution above the option 'More space' completely in the native resolution.

• Blurry images on the Retina display

  Dear all,

  I have two iMac 27', one of 2010 and a whole new one retina.

  The topic is:

  Editing some pictures on photoshop for my site on the retina of display but the photos seem a little obscure, as a low resolution...
  Edit the photos exactly the same on my old iMac and the perfect look of photos!

  Same size, same resolution, same photoshop.

  To be sure, I saved the two photos for the web on iMacs and then open them with the application overview on both screens.

  Even, perfect on old screen and a little little point clear or blurry on the retina.

  Someone knows why?

  This happens only on photos, texts and stuffs are supa clear on the Retina display, but I noticed that most of the websites I visit display pictures unclear!

  So I guess that the problem is not the way that I save my photos or computer that I use.

  looking forward to read from you guys.

  Jules.

  On the regular iMac, an image that is 400 pixels may appear as about 3 inches long on this screen. However, on your iMac to the retina, that image would be on a 1.5 inch. This is because the iMac has double the resolution, but the same retina display size. Which makes things look great. The downside is, it can also make things look small. To avoid this, the iMac of retina automatically stretches everything so a 400 pixel image on the regular iMac seems the same size on the Retina display. If you set a picture on, you know it can become blurred.  The solution to optimize your images for the Retina of your iMac display is to use higher resolution images. If you take a picture only twice as large that it must be on a traditional screen and squish it down for display on your Web site, it will look sharp for normal users. Then, when he's nervous for someone on an iMac of retina, you're going to be displayed at its original size - and it will always look perfect. There are ways to check the zoom level of the web browser and provide different versions of images on this basis. HTML5 offers tools to help with this. Another solution is to use vector graphics to SVG.

• Flash Builder looks blurry on Macbook Pro with the retina display

  Hello

  Interface Builder Flash looks blurry on MacBook Pro with the retina display.

  Here is the screenshot:

  http://i.imgur.com/qMmmu.png
  

  Enlarge the image in actual size and notice that the interface of Flash Builder looks blurry.

  Please solve this problem.

  Andrey

  I had the same problem - could not believe my eyes on how horrible and blurry Flash Builder looked on my new Macbook Pro w retina.  Through she had suffered since last week and have just discovered this work around that someone figured out for Eclipse that also works on Flash Builder (guess b/c it is built on Eclipse).  Here is the link to the bug report that shows the work around (thanks to Brad Hudgeons):

  https://bugs.Eclipse.org/bugs/show_bug.cgi?id=382972

  Here is a cut and paste from the bug report in the case of the above url is deleted:

  Here's the workaround:  Do "Show package contents" on the Eclipse.app.  Edit Contents/Info.plist.  Just above     Place this:  NSHighResolutionCapable 
  

  Instead of Eclipse, display the contents of the package on Adobe Flash Builder 4.6.app.   After you change the Info.plist file, go to the Adobe Flash Builder 4.6.app and reproduce.  It will create an Adobe Flash Builder 4.6 copy.app.  Delete your original Adobe Flash Builder 4.6 and rename the Adobe Flash Builder 4.6 Adobe Flash Builder 4.6.app copy.app.  Then launch Flash Builder - you should see the text which is much clearer.  The graphics on the user interface are still unclear but at least the text should be crispy.

• Cannot lock the MacBook Pro with Apple Watch

  I do not see in Preferences-> Security & privacy-> system "Allow your Apple Watch unlock your Mac."

  The screen is just as it was before the Sierra.

  MacBook Air 13 "early 2015 - Sierra 10.12/Apple Watch - WatchOS3

  See you soon!

  I, too, am unable to lock my MacBook Pro with my Apple Watch. However I don't see the checkbox "Allow your Apple Watch unlock your Mac.". I checked it but I can not unlock my Mac with my Apple Watch.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.