Which WLan router would be compatible with the Satellite Pro A300D-13th

Similar Questions

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• What are the cards Wi - Fi are compatible with the Satellite P10-304?

  Hello

  Please can someone tell me what mini-pci Wifi cards are compatible with the laptop Satellite P10-304?

  I tried a broadcom 4318 with no look.
  It installs the material as seen in the Device Manager, but can not find all the networks (think there is a conflict with the motherboard)

  Tried an AW-GM100 Azure that has a conflict as soon as the computer message cell phone messages.

  As in advance

  Mark

  Hello!

  Theoretically, most of the WiFi cards should work, but the best way would be if you take a WiFi card that was delivered with a computer laptop Satellite P10.

  I put t know what cards shipped with this laptop, but I have a little search here in the forum and I have created a thread that might be interesting for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23749

  Good bye

• What RAM modules are compatible with the Satellite A100-590?

  Hello

  I plan to upgrade the memory of my A100-590. At present, there are 2 x 512 Mo of RAM DDR2-533 Samsung inside. The motherboard supports PC2-4200 and PC2-5300.

  If I want to put 2 x 1024 MB DDR2-667. Now, my question is, RAM from other manufacturers such as Corsair, Kingston etc is also compatible with the jury?
  Thanks in advance for your answers!

  GMC

  they * SHOULD * be compatible with this machine, but I won´t dare to say they really are.

  Then it s even better to use the original modules because you can be sure that they are 1000% compatible with your laptop.

  Welcome them

• Suddenly our router keeps losing the internet.   The representative of the Cox says that IPV6 on the router is not compatible with the Cisco modem.   I'm turning it off?   Who is?   All started 3 days ago.   Have to reboot AirPort Extreme

  Suddenly Tuesday, our wifi stopped working.   Cox can not see anything on their end.   So far, we had to restart 5 times.   I finally realized that it is not the modem (Cisco), but our AirPort Extreme.   That's all that needs to be restarted.   I talked to a technician that I got to know, and she said that this week this problem started occurring with customers who have extremes of the airport.   Something about the airport in IPV6 and this is not compatible.   Before systems were PVI until the numbers came out (?)   In any case, she said Cox could not fix this, that I needed to talk to Apple to see if I could disable IPV6, at least for now.   I think I see how to do this, but does it make sense to anyone?   We have a new modem, installed in January, Cisco DPQ3212, good speeds, no issues whatsoever until this week.   There are also 2 other friends here (Scottsdale, Cox) with extremes of the airport.   Any suggestions?

  Cox has made a number of recent changes to their service, and they are trying to integrate IPv6 technology into their signals. They have not fully implemented the changes that must be made, and not commit to a date where things will be fully installed.

  Everything was fine until Cox implements these recent changes, and now Cox is blaming the problem on Apple. Apple has a different answer, as you can imagine. It is typical among manufacturers... blame the other guy.

  Apple routers are picking up some of the information they need to work with IPv6 and Cox, but since Cox has not completed the process, you'll probably best results trying to not use IPv6 with the airport router at all until you receive word of Cox that their systems are ready.

  The bottom line to this problem can be resolved by asking "What has changed".  The answer is Cox has changed.

  Configure your router to the airport most convenient to use IPv6 local link parameters only for now, to see if this will help.  You will not be able to realize all the benefits of IPv6 at the moment, but I hope that things will improve.

  

• What model of other screens are compatible with the Satellite C655D

  My Toshiba Satellite C655D screen is broken, ask some models of LCD cell phone compatible with it?

  I recommend buying a screen to authorized Toshiba dealer.
  You will be certain that such display 100% compatible.
  But the laptop does support a widescreen 15.6 "so, theoretically, most 15.6 screens should be compatible

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Search for HDD compatible upgrade the Satellite Pro L10

  Hi ive just bought a satellite pro L10, who needs a new drive hard and im new to computers laptops so im wondering if there is a particular model of hard drive I need and there at - it those who recommend or avoid.

  any advice will be greatly appieciated

  Well, you have the difference between SATA and IDE hard drives.
  This laptop was certainly equipped 2.5 HDD that support the IDE interface.

  I know that some L10 notebooks were shipped with 40 GB and 60 GB HARD drive.

  I remember that this question has been posted plenty of time here in the forum and so I looked for similar topics here.

  .and. I found a ;)

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=89609𕸉

  Last user reported that a 120 GB HARD drive works fine so maybe this might help you.

• DELL 1510 N WLAN Mini card is compatible with the W8?

  I installed W8 on my Dell Studio 1735. Access wireless Internet is very very slow. I don't have this problem with W7 on the same computer. I tried with an external network cable. Very fast, 50mbps. I also tried with an external wifi adapter USB Belkin. It works very well. Computer is a Dell Wireless 1500 N WLAN Mini Card Driver version: 5.100.245.20 Date: 2012-03-13. I can't find a better driver.

  I have another problem I do have with W7.  I can't evaluate the computer. The Windows experience index cannot go beyond test Direct3D 10 Texture Load assessment.

  Can anyone help?

  Thank you.

  I seemed to have found a solution to my issue.
  

  I was able to find a Win 7 driver that solves my Windows 8 driver issue with very slow and intermittent/dropped
  

  wifi connections for the Dell 1510 N WLAN (Broadcom 4322) wifi adapter.
  

  The driver I found is: Network_Driver_WD35F_WN_5.100.235.12_A37
  

  I found it here: http://www.dell.com/support/drivers/us/en/04/driverdetails/product/precision-m4500?driverid=wd35f&fileid=2962647016
  

  The the auto installer will not run without error. However, it will allow you to extract the files from the driver
  

  package to a directory of your choice.  Then you can point Windows 8 driver change/update utility
  

  ('Have Disk') to that directory - 'Drivers/Win7/WL' and select the bcmwl6.inf to install a driver
  

  (Broadcom v.5.100.235.12)
  

  I hope this helps others.
  

• What CD/DVD drive is compatible with the Satellite A10 S103

  I use the laptop Toshiba Satellite A10 S103 and I am about to replace the CD/DVD-ROM drive of origin by a new who can also write CDs and DVDs.

  However, I got a notice, that after the installation of the new DVD to drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  Can you recommend a drive of DVD - RW which could replace the old DVD - ROM drive and would work without any additional adjustment of HW?
  The new DVD - RW drive should be similar to know
  [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html].

  However, I was not able to decide that if this device will be or does not work in my computer that I don't know the parameters of the original DVD.

  My original Toshiba DVD drive information as follows:
  ' 1. ' "model SD-C2612
  2 "ROM worm." 1315
  3 'serial No.' 394N002659
  ' 4. ' 302 ' version number.

  The computer is already out of warranty

  Thank you.

  > However, I got a notice, that after the installation of the new DVD drive "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  You are right. FDI #1 error is displayed because the BIOS doesn't recognize the new internal CD/DVD drive because of the wrong master/slave/c-salt settings.
  Usually, these settings are fixed and cannot be changed on the external sides with another position of the rider.
  The firmware controls the notebooks internal parameters ODD.
  The use of ratings taken in charge and compatible is so very important.

  Sorry, but I didn t find details of compatible CD/DVD players.
  Did you look in the user manual of your laptop series?

  In my manual, I found some info on my laptop-compatible players.
  So maybe you are a lucky man and your owner's manual will provide useful information.

• Why the video file quicktime is not compatible with the dvd pro? and what can we do about it?

  export from fcp sequence to quicktime movie and impossible to open the file in dvd pro. Why is this and is at - there a way around this problem? better yet, why is-file quicktime video incompatible with dvd pro?

  How exactly do you export? Master file? What are the settings?

• What brands of CD/DVD are compatible with the Satellite A300?

  Hello

  I have a big problem when I burn the media (cd or dvd) on my computer toshiba satellite A300 laptop.
  I already try different brand (philips, sony, tdk,...) but for the tdk it works once in five.
  Here, I bought the sony recordable cd and when I tried to burn it, I got the message 'media incompatible or poor quality' :-(

  I use the app "cd burner xp".

  I do not understand what brand should I buy? of is it a problem of softwer?

  Thanks in advance to bring your lights.

  FOR EXAMPLE
  (Belgium - Soignies)

  Hello

  I'm Satellite A300 with dual boot (Windows XP edition family and Win7). I use NERO burnng rom application with two operating systems and everything works perfectly.
  I use mostly DVD-R virgins and I always buy Verbatim or TDK.

  What media you use (CD - R, DVD-R or any other format)?
  Have you noticed the same problem using different formats?