While a single 2130: printer

Similar Questions

• HP4630: while a single 4630 - printer disconnects despite a wifi connection

  I installed the drivers from HP4630 on my Windows laptop, 10, it says that it is connected to the wifi by the test pages.  As soon as I try to print it tells me that the printer is 'offline' to the right of the description.  I spent 2 hours trying to solve.  The "Connect" under "Printer" selection is not allowing me to get depressed.  I am at my witts end

  Hi eleanors road,.

  You are welcome!

  Please keep me on the progress, once you have the time.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this works!

• While idle and when printing, display screen becomes blue with 0xb900103d messages

  Printer is HP PSC 2355 (ink jet)

  Windows 7

  Moved Office HP laptop Toshshiba

  Problem: While idle and when printing, the screen turns blue with one or two 0xb900103d or 0x8823cd1e messages.  Restart the printer corrrects the problem, but he finds himself in anywhere from 2 to 12 pages.

  Thanks for your help!

  There is a document using address type codes 0 x in the PSC 2355. This document can be found here.

  If this error appears when printing and idling, then I would say that this is probably an internal hardware issue with this printer.

  I hope this helps.

• DeskJet 1510 while a single printe: can the deskjet printer 1510 create a searchable pdf document using acrobat reader dc?

  When scanning documents using the HP 1510, I already had a drop down menu the possibility to save my document in pdf format 'searchable' that I use to run another program that combines my PDFs in a large document.  Then my computer crashed during installation windows 10 and I lost everything.  I returned to windows printer drivers 7 resettled the 1510 and all software on the HP site and installed acrobat reader dc as my adobe product.  Now when I scan everything I see is to scan in pdf format.  How can I return the option scan to searchable PDF?

  Hello

  You can check the 3rd aprty following software that analyzes the text of a PDF scanning serchable:

  https://www.naps2.com/

  For the recognision of handwritten text, you need to get a professional OCR software, such will probably cost... I'm not aware of any freeware OCR program which is capable of such a...

• While a single F2187 not scanning (Windows XP)

  This all-in-one has already worked on this computer and scanned documents. I solved the immediate problem by copying the document in question, rather than scanning it as expected. I sometimes alternative HP all in one installed on that computer. It is a USB connection on a single computer.

  I read the article for help . The scan diagnostics program does not list the all in one F2187 as being installed, it just displays USB.   The help section is re - install, but I already recently did the first time I read the article. I reinstalled using the internet, as I do not have the CD origianal at hand at the time. (So also no instructions for the moment)

  Other notes

  • Even if I get a message on the connection not the all-in-one works ok as a printer.
  • The scan does not work with HP solutions
  • The copy will work however the HP solution
  • No doubt the background material button is to copy, it doesn't work (high green flashing of the LED for a while - but there is no attempt at analysis.)
  • Scanning does not work from Windows XP (after trying to analyze in the paint - analysis option is greyed out)
    (I wonder if that indicates some kind of conflict)

  Any help or suggestions welcomed, but it may take me a few days to get around events and try to solve this problem.

  This is a long post, so I'll start with:

  In summary

  • something has changed and stopped the analytical work, I guess an update, or an update failed
  • an installation using a web download has failed repeatedly
  • HP diagnostics and troubleshooting does not seem much help
  • a re - install from an original cd has worked (in fact the CD might have been a different HP printer)
  • I see that my security software seems to interfere (Norton Internet Security) with the web update
  • Msinfo32 did highlight the problem

  Now for a longer answer

  I don't know why the scan has stopped working. I'm guessing that maybe an update was not suitable, or an update has failed. My system is Windows XP and using run-> msinfo32 I couldn't be a problem that the printer has been listed as a problem the appliance without driver.

  I tried the downloads of diagnosis HP that they did not help as much as a problem has been identified, but no printer has been identified as being installed, it just displays as a USB device without a name. RHE print download diagnostic work and give a load of green ticks. The printer did continue to work.

  The download of the web re - install failed. An attempt ended with a fatal error. Most of the attempts ended with screens showing but no option to do something. For example a progress bar still not 100% but an end 8/8 and gray buttons. The installation process with the Windows Task Manager to kill led to a download of an another interactive help file. I'm not sure that this was the case of good advice or offered that solve anything, but it was good at least to see happening.

  I tried to use one of the downloads of convenience store without being connected to the internet, but he refused to play that a connection is required.

  I noticed that my internet security was apparently interfering with the process.

  I am currently using Norton Internet Security. (NIS)

  I tried to start a re - install security installed and activated. I don't have anu warnings or advice to which I would need to react, but I noticed he was blocking actions. This continued even once installed software had its security option further down.

  I came to the conclusion that unless I uninstalled NIS a re - install online would not work.

  I dug an installation CD

  • I left off Internet - contributing to the security
  • I used the interface parameters of the user interface to reduce his minimum security setting NIS
    (he may still have blocked an online installation, but now he was offline, I have no blocking view reports
    -Note that I speak no explicit blocking reports
    (- I mean only blocking reports once apparent, history of security is displayed from NIS)
  • It worked, now the installation proceed as usual

  All in one printer works again including the scanning from the software, the hardware button

  He don't not at the moment seems to function as a scanner of Windows in the paint, it's something even HP help pages expect, he is listed as a workaround for problems of scanning.

  If you are interested in you answer

  • is NIS proving a known problem, and if so, that being done about this, is this a known issue on their forum?
  • you are able to get the web Updater runs on a XP with NIS system, if necessary
    • stuff like what I should have done?
    • you get block messages or not?
    • I am attaching a picture of HPZSHL01. EXE is not loved, but there is no option to trust him etc.
    • I am also attaching a picture display which of NIS user interface, should be relatively non reactive it is stopped, as well as can be done bar uninstall
    • Someone at - he better ideas except that it is a bad installation, is this a known problem and is the fact that the web install a known issue?

• HP CP1215: HP CP1215 single first printing sheet

  I was fine for a while on this printer print and think it's a great printer.

  He suddenly decided that she onl wants to print the first page of a document or a print request.

  Fine for a page of letters but if I need to print a long document, so I have to print page 1 on its own then page 2 on its own etc etc.

  Anty advice gratefully received.

  Hello @GeorgieD, greetings!

  Thanks for reaching out! It is a good place to find the help you need, other users, HP experts and other support staff.

  I understand that your printer only prints the first page of each document you are trying to print. This looks more like a problem of driver on your computer. I suggest that you uninstall the current drivers completely and to download and install the new update of drivers.

  You have not mentioned the operating system you are using. Therefore, I give you for operating systems.

  1. If you are using Windows OS, follow http://hp.care/2bJ9OME to completely uninstall the old drivers. Once done, go to step 3
  2. If you are using MAC OS X, go to http://hp.care/2cKwLyC and follow the steps to completely uninstall the drivers.
  3. Now restart your computer.
  4. Go to http://hp.care/2efDFuG to download and install the printer drivers on your computer.
  5. Try to print a multiple-page document and check.

  Please let me know if it works for you. Thank you!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• While a single 2610 stop working

  my all in one single 2610 simply stopped communicating with my office; has got the following messages: has not passed window logo testing to verify capatibility with windows xp, then hpgwiamd.dll of files on cd necessary, then hpzius12.sys on hp need cd, then hpz1mc10.dll necessary.  a do not have any problem before.  checked all said hp hp and downloads are up to date.  any ideas?  Thank you

  Looks like you need to uninstall the software and reinstall it again. Equip your drive when it comes up to select uninstall, unplugg your printer prior to this usb connection. Once done go to the hp.com and down load the newest driver for your printer software. Download and install, don't plugg in the intill usb, only the software request you. Tell me how it works.

• While a single panel C309A does not

  My C309A printer Panel is on, but none of the buttons do not work... Start button / stop does not have anything, arrows, touch copy, fax, menu key, home key button, etc... NOTHING... The fact of unplugging and plugging back in will get the printer to start sometimes, otherwise the screen menu screen does not even there and hangs with the colored bars that scroll down... Printer will print, works...

  Is - this one of the printer?

  Thank you

  Al

  Looks like the printer is getting hung up in internal controls at the start, but it could also have a power connection problem develops in the printer.

  Have you performed an oil change at full power on the printer?

  * Unplug the printer while on

  Disconnect the other end of the power cord from the wall jack directly

  * Separate the power cord of the power supply module in the middle of the length of the cord

  * Wait a minute

  * Plug the unit back to

  There are other steps, for when a printer is out of order, troubleshooting can be found here.

  It is also possible that a reset for the functioning internal printer could get going.  I'll send reset information you via private messaging.  Before performing the steps, please read Bob_Headrick wire on the reset of the printer.  The thread can be found here.  I hope this helps.

• Brother HL-2130 printer with my Surface

  Me too I have a printer Brother HL-2130, I try to use with my Surface. I read the instuctions but what is exactly a "device-Windows RT '...

  Hi Teresa,.

  What is the full error message?

  Look at the post responded by Marilyn O January 9, 2013 and follow the steps and check if this may help;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_rt-hardware/i-cant-get-my-brother-laser-printer-to-work-with/728eb83c-d893-4ceb-A509-20223f5d5cf7

  Check out the link;

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you still face the problem persists I suggest you to contact the manufacturer of the printer.

  http://welcome.brother.com/in-en/support-downloads/online-remote-support.html

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Single-line print multi-line TextField

  Hi all

  I have 2 TextFields on a frame in my film. What happens is, if my connection to losses of film to a server, it starts to run a timer to continue to retry the connection every 10 seconds. And what I'm trying to do is to write in one of current advance TextFields and what 'Retry' count on what we... But for some reason, I'll try to have 2 htmlText lines appear on the same line, except the second method htmlText adds new text to a line break.

  I already put the TextField on the stage to be single line and no. WordWrap, and set the text of TLF. So how could it possible to appear on separate lines 2. ? What confuses me the most, is that I updated the TextField on the stage and in the following single line (* just to see if it helped, and there no), then why he would print to a second line is spooky in my mind.

  Here is my code:

  / * There are 2 TextFields:

  *    #1. Title/header field, this text will not change.

  *    #2. Message/info field, this is the text I want to change to each loop timer

  */

  function retry_connectSocket(event:TimerEvent)

  {

  trace ("FUNCTION IN: retry_connectSocket():");

  WBDMovie.errorMsg_textField.multiline = false;

  WBDMovie.errorMsg_textField.wordWrap = false;

  Add text to the textfield 'errorMsg_textField ':

  err_string = ' # ' + myTimer.currentCount + '. '. Retrying connection... "

  WBDMovie.errorMsg_textField.htmlText = "< font color ="#FFFFFF"size = '25' > < b > ' + err_string + ' < /b > < / police > ';

  Call function 'connectSocket()' to try to reconnect to the server:

  connectSocket();

  If socket.connected returns TRUE, then the connection has succeeded

  If (socket.connected)

  {

  Print the Message that the connection is successful:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#00FF00" size = '25' > connection successful! " "< / police > ';

  } else {}

  Print the Message saying that the connection has failed:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#FF0000" size = '25' > Connection Failed! "< / police > < br / > ';

  }

  }

  No idea why it is printing several lines? In addition, any ideas for why the "BOLD" < /b > < b > tags do nothing no more?

  Any ideas or suggestions would be greatly appreciated!

  Thanks in advance,

  Matt

  Have you tried to use a regular dynamic TextField instead of a TLFTextField?

• How the time the FSP even on a single sheet print multiple

  Hello

  I'm looking for the equivalent of the rectangular table tool in Autocad, to print duplex business cards so I could print several cards per page.

  With the multiple tool, I just get a single card, it doesn't seem to work.

  Thx for your help,

  Matt.

  You need to duplicate the pages first. This can be done manually, in

  holding down CTRL and dragging them in the Pages pane on the left, or by

  by using a script.

• HPofficejet5600v all in a single pr: printer on photo paper jams - every time

  on photo paper jams

  Welcome to the HP Forums @calopeanuts

  I came across your post about the question of jam you feel, and I wanted to respond to help with my suggestions. Please see the guides below to resolve this issue. If the problem persists after troubleshooting, please try to call the hotline to discuss replacing the printer or the rating of. I will include HP contact info below to reach them directly.

  One "original jam: clear jam and press OK"message for HP Officejet and Photosmart all-in-One Series Printer.

  A "Paper jam" error on the HP Officejet 5600 all-in-one printer series

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• While a single PX30t - some programs do not work after Windows 10

  I have an office in a single PX30t.
  The Toshiba Service Station recommended I update software due to my upgrade to Windows 10.

  It asked me to uninstall the programs first, and then install the updates.
  However I had problems with the new updates do not work or already existing.

  One of the programs was the Toshiba Blu ray disc player 32/64-bit (it is not available in the download list), and Cyberlink media (starts to download, but encounter the error "your system must have a version of non-evaluation of PowerDirector Touch 1.0 installed.) The installation will stop.

  Has anyone else had these problems.
  I'm afraid I won't be able to play discs more that I deleted the Blu - ray player? I would be grateful for any advice.

  Also after the Elimination of the programs of the computer updates is more appeared in the Toshiba service station and I had to download them directly from the Toshiba site - very frustrating!

  Originally posted by DuvaPC14
  

  I have an office in a single PX30t.
  The Toshiba Service Station recommended I update software due to my upgrade to Windows 10.

  It asked me to uninstall the programs first, and then install the updates.
  However I had problems with the new updates do not work or already existing.

  One of the programs was the Toshiba Blu ray disc player 32/64-bit (it is not available in the download list), and Cyberlink media (starts to download, but encounter the error "your system must have a version of non-evaluation of PowerDirector Touch 1.0 installed.) The installation will stop.

  Has anyone else had these problems.
  I'm afraid I won't be able to play discs more that I deleted the Blu - ray player? I would be grateful for any advice.

  Also after the Elimination of the programs of the computer updates is more appeared in the Toshiba service station and I had to download them directly from the Toshiba site - very frustrating!

  Hello

  Had the same problem (and message) with Cyberlink Media Show on Windows10 on a Satellite P50t - a. Tried to find PowerDirector Touch 1 with the intention to delete, but could not find. Did not find any other mention of this problem on the forum!

• "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

  "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

  Hi @artdahlink,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

  Maps:
  Card type / size chart

  • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
  • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
  • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

  NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

  There is no guarantee the implementation of a custom paper size to work, however, you can try this method

  • HP printers - creation of custom paper sizes

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• 6700 all in a single premium printe: problem with printehead on tires all hp offers with no success.its only less than 3 years.

  his 3yrs.old even had a gun for 10 years with no problem.when I was able to contact hp, they said I have to pay it's bs.they just that buy you a new printer.

  Hi @highseas99,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the print head. I'll be happy to help you.

  By your message, you have tried all the troubleshooting. The print head is integrated to this printer and is a part which cannot be replaced. Buying a new printer is the only option, but HP offers printer ' trade-in Trade-up '.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.