While the iCloud recovery backup... continue to go back to the screen HELLO?
I am currently trying to reactivate an iPhone with the last backup to iCloud.
The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...)
Now I'm gone screen HOLA-HELLO, entered a network wi - fi available, connected with my operator (with the right SIM card of course - phone work - test received call).
However, now, so that this treatment with the recovery of backup, when I let the phone go to the screensaver, it keeps going back to the screen HELLO... Is * normal *? Or should I suspect a problem with the iPhone 5?
(Just bought from a dealer - it is seller-renovated, reliable source)
Thank you
Rob
While iCloud restoration takes time - given the dependencies on your WiFi and the amount of content to download - it should not restart loop like this
Restore your device from an iCloud or iTunes backup - Apple Support
Tags: iPhone
Similar Questions
-
How can I get the screensaver to stop after a few minutes, while the screen turns off.
original title: computer sleeps
I leave my computer on all night. When I'm done with it for the day, after 5 minutes, the screen saver turns on. How can I get the screensaver to stop after a few minutes, while the screen turns off. What we call that? Sleep is - this Mode? Hibernate? Thank you!
Hi miztex37,
· You want to put the computer in sleep mode?
See the following article to see if it helps.
Microsoft Windows XP - automatically put your computer into standby mode
See also:
Microsoft Windows XP - manually put your computer in sleep mode
-
Satellite U400-131 crashed while the screen of the BIOS udpate - now black
Bios Update crashed my laptop Satellite U400-131, now I got the black screen and don't know what to do?
Someone knows how to fix this?
Thank you
Vries Matthijs
This bad s Companion
It was the worst case that could appear wile BIOS update.There is not a lot of things you could try
In your case the ASP must be contacted in order to check the machine and the module ROM where the BIOS is storedIf you're lucky, while the ROM module must be flashed again and the laptop should start again if the worst cases the motherboard must be replaced.
-
is it possible to unlock the iphone with touch id while the screen is off?
I wonder if the iphone can unlock the screen with touch id without press the home/power first of all, is it possible to do?
You can use the sleep/wake button.
-
How is the screen saver for the photos?
Hello
Welcome to the Microsoft Vista answers Forum!
Note: files or images will be stored in the same C:\Windows\System32\PhotoScreensaver.scr file after the image is removed from the main location. This is the reason why the photos appear even after their removal. And once you navigate and new photos as your screensaver the old ones will be replaced automatically.
See the link below to learn more about the Windows Photo Gallery:
http://windowshelp.Microsoft.com/Windows/en-us/help/a1f7759a-BDA3-4380-b0c1-e25aa28df8671033.mspx
Hope this information is useful.
Thank you, and in what concerns:
Suresh Kumar-Microsoft Support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
while loop: delay enforcement and continuous updated: VI back to fake out of time?
Hi all
I want to control the time of execution of a while loop. I want the user to have the ability to decide how long he wants to run the while loop. The while loop is used to update certain values, then it should run continuously, not only run once and wait (that I could easily using the synchronization functions).
I used the time up VI as suggested in this post:
and works well, but the while loops are integrated into another loop for and when Goes to the next iteration, the elapsed time Boolean result is set to true and it does not run at all (I think that's the problem).
Can I return the Boolean result of the elapsed time VI to false, after reaching the target of time? That would solve my problem, I think that...
I attach some of my VI, although I don't know that it could be useful for you...
Thanks for your help
Use the iteration for while loops count and an equal to zero? node. Then the output of the comparison at the entrance to reset the elapsed time functions. The idea is that reset you on the first iteration (when I = 0).
-
the event appears with the decrease in intervals to the extent that it is not usable either
also: using the hardware start button makes pc work for a few seconds first, that the system shuts down again. only after about 3,4,5 times system starts [and dies as described]
suggestions welcome
HDD control ok
commissioning has failed at the beginning, I decided to start from scratch
family XP Edition installation
-error msg
-cannot copy the files cmincfg.xml, ipcgf, osinfo.xml, potscfg.xml, pppcfg.xml,
xmlp_beak.xdr, even with weed instead of beak years then bdg, ecp, fcw, hlp, loc, DSS, mcc, xmlp, mcu, mpu, reg, ssd
After reading http://forum.notebookreview.com/windows-os-software/220341-xp-installation-wont-copy-cmnicfg-xml.html decide to get in shape first
Startup Repair couldn't fix windows in order to start from there
When you start the XP CD again (you are looking for a format option), option appears "c:\ initialization?
After choosing this option, pc dies immedtiately
now using cd Recovery Manager (n ° 2 of 2; #1 did not start), I created after the purchase of the pc
option "reformat the partition of windows from your hard drive.
PFF
-
Problem dual screen ' after working for a while, the screen of my laptop turns off.
Original title: Problem dual screen
I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?
Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.
KR
bs3dm
Portable computers support two monitors. The problem may be caused by two reasons:
1. incorrect power setting.2. the problem with the drivers.1. you can download and open Microsoft Fix it for the question.2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check. -
iPhone stuck in the screen "Hello!"
My iCloud was hacked few months ago and since I have not; connected to or turned off the coast to locate my iPhone. I factory reset my iPhone and now it says "this iPhone is linked to an Apple ID. Enter the Apple ID and password that were used to put in place this iPhone (j●●●●●@gmail.com)"
Now my problem is that I can create an Apple ID with the same email used when I activated the iPhone, then it means that the identifier Apple is prohibited and that's why I can create a new one with the same email, however, when I try to log in with my email and password it says: '[email protected]' does not unlock this iPhone.
Now, I know that the email/password I typed are correct, because I tried to put the bad password with the goal and he then says "Apple ID or password Incorrect" so please help solve me this problem. The iPhone is not stolen/found and I got for it. If you need more information, please ask me. I need to fix this young man, because my school starts soon and I need phone for her!
Hello
Follow the steps here to disable the locking of Activation:
If you can not (because of your previous account numbers), I suggest that you contact the Apple Support for help or make a Genius Bar reservation (making sure to keep the original proof of purchase throughout).
-
IMac, remove the screen and use your Apple TV
I send my iMac screen 2011 for repair. I would use my Apple TV mirrored my iMac screen {(aucun écran LCD installé) to a HD TV while my screen is out for repair.} Is this possible? Or not because I have to be able to see "Air" on my imac to get there and Play with no screen is not possible?
If no it can't do so what buying a mini port for cable HDMI and running 'mirror' to an HDTV with the iMac screen removed?
Basically don't want to be down while the screen is out for repair
Thank you
Mike
I don't think that your iMac will start without the installed screen.
-
HP Envy 700PC: "entry not found sign" and the snoring of the enclosure of the screen
Lately has been a problem with my computer. I think that maybe the graphics card is wrong.
I have a:
HP Envy 700PC
Model: 700-300z
Still under warranty
Everything is the same
Upgrade to Windows 10
The first time it happened I was listening to music on Pandora while working in the room. I look above on my HP screen it say "Signal entry not found" screen will sleep mode but I couldn't ehre still play music. I repeated press ENTER, but he wouldn't return. After several reboots, the screen came back to the top.
Recently happened during the game World OF Tanks. What's happened is that my speakers are beginning to make a buzzing sound. He is yet to come of the audio, but it is really low. I then restart my computer to see if that solves the snoring. The HP logo appears and windows 10 thing round runs below it. Then my screen turns off and says 'not found input Signal. I repeated press ENTER, but it is not. I reboot and still the same thing happens, restart again and it's same thing, once again, but this time it starts normally. Once rebooted Windows speak it sound goes.
Last night I was playing WOT and the same thing happened with the speakers hum. I went to restart and got the white screen with the 'not found input Signal. I hit enter but he wouldn't do anything. I restart 3 times and still the same problem and the snoring has not disappeared while the screen was blank. I unplugged my power and the HDMI from the screen. I got out my old screen and hung up and that the screen worked fine and I've been to my login screen. Then I logged. Then I unplugged my old screen and hung to the top of my screen and my screen was now working well and rose windows.
I'm tired in making sure that the HDMI is secured to the back of the tower and when I wiggled it my speakers started to hum again. I left if go and after awhile the snoring got quieter.
I opened the tower and my graphics card fan works well, and there is no dust.
I've updated all my drivers with "Drive Booster" and they are all up to date.
Thank you for product information...
What is likely to happen, it's that, as is all too typical, that the UPGRADE of Win10 have not installed the drivers for your video card, so that Windows can not see properly.
The good news is that HP does not provide Win10 video drivers for your PC, at this link: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-300-Desktop-PC-series/6886619/model/6890453
The bad news is that HP provides several other different, and I have no way to know which driver is made to your machine because I have no way of knowing what video hardware, he has in him.
If you look in Control Panel-> Device Manager and there it says that you have the hardware, then you will know which driver to download and install.
Good luck
-
I need help
I need help
The display is sidewayMethod 1:Press and HOLD on Ctrl + Alt keys > use the arrow keys (up, down, left, right) to realign the screen
Second method:Right-click on the free space of the desktop > graphics > Rotation > first try normal, then the others.Method 3:
If this is a recent problem, and if you remember a date where the screeen was rightsideup, do a system restore.Choose a date, while the screen was in the position of correction as your restore point.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/ -
What is the screen resolution?
Why can't one find a space to put my password when you are prompted to upgrade adminastrator password?
Hello
Where are you that prompts for the password?
Are you invited to enter the password after your computer comes out of the screen saver?
When have you started to notice this behavior on your computer?
If you receive this message when you try to run any application, then your user account may not have the required administrator credentials. In this case, you must change the type of account to the account administrator.
Change the type of user account
http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-typeSince you mentioned the screen saver, and assuming that you found the password after the computer comes out of the screen saver mode, you will need to disable this option.
1. open the screen saver settings by clicking the Start button picture of the Start button, clicking Control Panel configuration, appearance and personalization, customization, and then click screen saver.
2. Unselect/disable the one summary, require the connection box, set a time after which the screen saver throw and then click on apply. (Choose a time-out period that is not long enough for an unauthorized person to use your computer, but not too short that if you are inactive for a while, the screen saver locks your computer.)
If the fast user switching is turned on, select the On resume, display logon screen check box.
Use your Windows password for your screen saver password
http://Windows.Microsoft.com/en-us/Windows-Vista/use-your-Windows-password-for-your-screen-saver-passwordConcerning
Anthony. -
The screen on the Simulator, but not on the device loads
Hi all
This issue is driving me crazy.
The problem: I added a menu item in the email application. When the user clicks on the menu, I load a pop-up screen and get the entry user, then save it. This works quite well on my Simulator (8310 v4.5). But when I load in my camera (8310 v4.5), is not.
I can't understand where is the problem. Your entries please.
Note: I checked with the record menu item. I added a warning msg before loading of the screen. The alert is displayed, while the screen does not load. (The screen is a separate category in the same menuitem file, I have class instantiaite inside the application menuitem run() method).
Sorry, I was in a hurry, so just wrote a very brief answer. Unusual for me!
Take a look at this:
http://supportforums.BlackBerry.com/T5/Java-development/how-do-I-debug-on-a-live-device/Ta-p/446842
There are other tips on the forum that you will probably find through research, should he not help.
-
Hi all, I have a problem of display of a menuitem when the Screen class is pushed. I want to show the menuitems can I display while the screen is pushed, but could not find a way to do it.
I'm pretty sure it's something simple, but can anyone provide some assistance?
I currently have the code to push the screen below:
super(new VerticalFieldManager(Screen.DEFAULT_MENU));
Help, please! Thank you very much!
ankityadav4u wrote:
protected void makeMenu (menu Menu, for example int) {}
menu. Add (M1);
super.makeMenu (menu, for example);
}You really want to change the order of these two instructions - first super.makeMenu and menu.add.
gyubok wrote:
super(new VerticalFieldManager(Screen.DEFAULT_MENU));
I guess that your screen extends the screen. If this is the case, the correct way of creation, it would be
super(new VerticalFieldManager(), Screen.DEFAULT_MENU);
Maybe you are looking for
-
Thunderbird won't launch. It does nothing when I double click the icon on my desktop
Whenever I click on the icon to launch Thunderbird, nothing happens. I just see an hourglass as its charge for a second or two, then it does nothing. Can someone please? Thanks in advance.
-
Hello one of my keys broke off my keyboard and will not return, would it covered by the warranty, where I have to take for repair I bought the laptop from Argos.Also its very slow when I'm on the internet a I have full signal with Orange. Thank you S
-
When I start my computer, I get this error message: Windows cannot open this file: GLBD4EA.tmp To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually sele
-
Optimize the MITES on the NOR-HSDIO devices
Hi all; I download an example of web of OR call "NOR-HSDIO Stream of the use of the disc (generation) Win32 file i/o", the example of the generation advance. Although utilities in these examples work fine, (utilities are used to determine the transfe
-
lost my installation cd and now have a new computer
How to install my printer/copier on my new computer?