White line to help align the clips?

Similar Questions

• I created a PDF file in InDesign and the text boxes has a white line around one of the text boxes?   There is no color indicated on the sketch? How can I fix it

  I created a PDF file in InDesign and the text boxes has a white line around one of the text boxes?

  There is no color indicated on the sketch? How can I fix it

  Double post.

  Locked

• Need help aligning the SSD to install Windows XP Pro (32 bit)

  OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

  The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

  After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

  I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

  So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

  I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

  Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

  Thank you

  Jon

  Hello

  Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• a white line has appeared in the middle of my screen of pavilion dv6.

  is it a hardware fault & is likely to be covered by the warranty? I had the computer since November

  shawmaggie wrote:
  Hi, thanks for the response. The line is not replicated on the TV screen. The product number is LS247EA #ABU, 5CH12613QM series dv6-6154ea name

  Thanks for the identification of the product.

  Ok.  Now we know with certainty. Your solution system of Board of Directors and the graphics are ok.

  Your display set must be replaced.

  Contact HP Total Care and get the warranty service for your laptop.

• I restarted my computer and then it no longer turns. The windows screen and then a black screen came up with a white line that flashes at the top left.

  I had tabs open, and he said that he would not allow restart, but still, I pressed ok and now nothing shows that this black screen.

  Hi Alegreen,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: If the method above does not help, then you can refer the article and check mentioned below.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps.

• print photos in color with white lines on the photo

  When I print photos from my computer, the pictures have white lines running through. The color is good, but the white lines surf photography.

  Hello MaryHickey,

  If this problem is fixed after you have cleaned the print heads I think it's a problem with cartridges or heads.

  To resolve this, you will need to contact HP.

  Best regards

  Matthew_Ha

• White lines fixed with optimization of the art - is - it possible to copy with this setting?

  I have seen discussions on the white lines, you get on the edges of the objects due to anti-aliasing in Illustrator, and I found that when exporting, you can remove them by setting 'optimized art' in one of the options there.

  For those who do not know the issue of the white line:

  Sometimes, when the Illustrator blend the pixels around an object, it puts a thin white line around it that always appears 1 thick px any zoom level.

  Not really there and when it printed disappears. Trouble is, even when you export the document, or a copy of objects in other software for the use of the screen, it's still there.

  Many people think that white line is a tiny space, but it is not.

  People also tend to tell you that it is because you have two objects butted against another. Also, this is not true. The white line persists even on overlapping forms.

  People will also say it is when two shapes on top of the other follow the same path. Yet once, is not true. White lines appear even when you have only 1 object following a particular path.

  My problem is that I rarely export an entire document at once, but tend to copy items to it in Photoshop. When I do, the white lines traveling with her and becomes permanent. Even on a .jpg, .png, or .gif image file, the lines are still visible.

  What I want to know is, is it possible to copy objects in Illustrator using optimization of art?

  Or y at - it another way to copy them without taking these white lines with me?

  I know that I can get rid of them by turning anti-aliasing off the coast, but everything really looks pixelated, so it is not much better.

  In addition, anti-aliasing is not actually solve the problem, it just hides it. Even with the power off, when I copy the affected objects to Photoshop, the white lines reappear in Photoshop.

  And please don't bother the answer for me, explaining what the white lines are, or how to get rid of them or how to lose them in the export. I know all that.

  Notes:

  I'm under Illustrator CS6

  And Photoshop CS6

  Helmer,

  I wonder if this may be useful, or is simply ridiculous. I apologize if this last.

  If you can use a Raster object to copy into Photoshop, you try to use the object > rasterize and set Anti-Aliasing for Art Optimized, can see.

• Printer AIO 922, Solution of white lines

  I have a printer Dell AIO 922 a 3 or 4 years. It has been a very solid performer like a use inkjet housekeeping and I wouldn't hesitate to buy another Dell printer based on this one.

  Recently, it started showing the white lines, or more precisely, the horizontal white gaps. As the snapshot on the right. I searched everywhere but not found a solution. Available notice usually includes nozzles cleaning or using the alignment. A proposed post to wipe coding transparent plastic strip. These things did not help. Being an engineer and a professional problem solver, I decided to understand it. I hope that it is beneficial for someone else, as I often took advantage of other messages.

  First note is that it is a paper feeding issue, nozzles ink jet not blocked because there is no ink "missing." If you close the gap, the letters would be properly trained. The gap that has happened on each 37 mm (1.4 inches) to the bottom of the page. I was thinking one of the plastic gears in the drive of the paper feed system is broken or clogged with impurities, etc. With that, I decided to open it up and look at the bowels of the printer. I realize that many people prefer to go out and buy a new printer that do this, but it's for the rest of us. Because it is unusable, and there is no alternative available, I had little to lose.

  I unplugged all the cables power and carefully removed the top of the hinge scanner, being careful not to damage the cables sheet fragile 3 or 4. So I removed the 3 screws in the lid of the lower unit (printing). Carefully open and removed the lid of the snap-in using a knife and a flat blade. ATTENTION: you may need a second set of hands very patient to avoid damaging the hinges and cables that connect the top scanner at the base of the Ribbon. All cables can be removed gently from their connectors, but it's a little tricky. Tip: tape the scanner to scanner bed cover and the support arm to scan at the base of the scanner so that they are not flop around as you work on this.

  Now, you are looking in the Open box. On the right side of the friction of the main axis of power (the tree is approximately 1/2 "in diameter and has a rough surface to pull the paper into the printer) is a thin, transparent plastic disc. There are thin black lines around its outside edge that pass through an opening with an optical sensor that the shaft turns, driven by the engine. This provides a precise location feedback paper power control.  The disc is difficult to achieve, so I took a Q-Tip with alcohol to friction and wiped two sides that I shot it through the white plastic gear. Make sure you do not damage it. I repeated until the Q-Tip has come back clean. It looks like a small jet of ink mist gets type everywhere inside the printer, judging by other surfaces. So, after a few years of use, he had finally started do the misread encoder and cause the power issue of paper resulting. I have put together and he has beautifully reprinted.

  In this printer and I suspect in many other inkjet printers, there are 2 sets of engine controls, mechanisms and encoders. One for the race the printhead horizontally and one for paper feeding. In my research, I have never seen this mentioned. I've seen many, many messages asking for solutions to the "horizontal"white lines "-much of which doesn't seem to find solutions.  So, here's my karmic contribution to those who are willing to delve a bit inside the box. Good luck.

  Awesome! Thanks a lot for posting this solution. I just followed your procedure for my Dell 922 AIO printer works again.

• I'm doing a DVD on Windows Movie Maker, but some of the clips do not play during the slide show there at - it a way to solve this problem? __

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  =======================================
  Just some thoughts...

  It may be useful if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

  Also... it might be a compatibility problem with your source files...
  (videos / photos / music files)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Also... If it is a large complex project, you could have a system
  the question of resources. The answer would be to create
  more modest projects.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to create a vector from an image with a white line

  I need help as soon as possible.

  I have a design that I made in Photoshop CC 2014 and I need to make a vector. I was told the best way to proceed was to file in Illustrator CC 2014, which is what I have, but every guide I followed takes off the white line that goes around the text and extends beyond the tree. I need this white one to be there and it's so frustrating that I can't find a guide that will help me keep it there!

  Please, if anyone has the solution, please describe in DETAIL. , I have included the image, I work for example. I put a background black on it so you can see the white line which must remain outside the vehicle. The black background will not be outside the final vector.

  Matt,

  According to me, you can do the following:

  Come back to Photoshop and create black background like a rectangle, then the raster work is separated into two:

  The one with the red/white text on black background and the other with the tree on black background.

  Image then trace each and expand each track and then line them up by the outermost paths (tracing the outside shape of the black rectangles that must be identical).

  Then take it from there, with full marks.

• Want K204TX: HP wants to show me a white line on a white background

  Since I got this laptop, everything I've had there are problems, and HP has never been able to solve a simple problem. It's as if the guarantee is completely meaningless. They failed even to replace defective parts, and still less replace the entire notebook.

  I had problems with the hard drive and I was told that we cannot solve this problem, since it is a problem with every cell phone envy.

  I had a problem where dust accumulates inside the screen (between the screen and the external glass cover), and I was told that I have to send the phone to the service center (even if I have one "on-site, in-home service warranty" for 3 effing years).

  This time, an HP tech even told me 'computers LAPTOPS ENVY do not SUPPORT VLC PLAYER, YOU have TO PLAY MEDIA USING WINDOWS MEDIA PLAYER ALONE'.

  NOW, I have a white line that appears in the upper corner of the screen, and HP said that I need to take a picture of the problem in the BIOS. The BIOS itself has a white background. How can I click on a picture of a white line on a white background? If I write in white ink on white paper, someone can he read? I explained that precisely and said "since the issue is not present in the BIOS, please check if it can be covered by the warranty. WELL, THE QUESTION IS NOT IN THE BIOS, IT IS JUST THAT IT CANNOT BE CONSIDERED AS IT IS WHITE ON WHITE, AND YOU WANT TO ENJOY IT AND NOT REPLACE MY LCD? The problem is present in linux live what USB sticks as well! All you need to reproduce is a DARK BACKGROUND.

  It's ridiculous, it's like HP does everything he can to its customers. "Show me a white line on a white background. If you can not, we will not honor warranty.

  Can a moderator (used HP) please look into it? At this point, I would like to exchange the system. I'm done with this computer. The problems are what I had with her, and HP has done nothing, does not replace a unique piece in the computer.

  They know that I need the computer, and so as a last resort, they ask me to return the computer to the service center.

  If I drop the computer to the Service Center, then what is the point of a 'guarantee on-site? This is blatant "advertising."

  

  Hello

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  Thank you.

• Align the reference numbers

  Greetings,

  I was wondering if there could be a way to align the reference numbers, possibly all to the right, to align the referenced text. There is a spacing em dash between the numbers and text separator. The extra space has been added after to help align the text better, who has worked for a few notes. However, there are a lot who are looking just as below and probably may be due to melting. Could there be a better way to align the number or the text while maintaining the spacing of em dash? Thanks for your suggestions!

  

  Peter,

  Working as numbered lists notes! Use the tab here (to be defined in the global Notes options) and Grep!

  

  (^/)

• Need help to remove the small white lines between attached forms. Still visible even after aligning anchor points.

  Hey, I'm new here, so many apologies if the community has been asked this question several times before. I do a quick search, but couldn't find an answer to my problem anywhere. Would be very grateful for help.

  I'm quite a beginner with Illustrator, so this may be something embarrassing simple!

  But as the title says, I have a very frustrating problem, trying to create an image of polygon. I've been using the pen tool to make triangles, then join all my anchor points with the horiz/vertical align Center. Roads joined look good, until I have add color... Triangles have a very light white line on them, I have tried to delete the anti alias, which solves the problem, but then the triangles look pixelated. Even when you import into Photoshop the pale lines are visible, as well as when the file is merged or saved as a JPG file.

  I've seen some very impressive polygon art and forms look seamless when joined.

  Here is an example of the problem. Ideally, I'd like that forms merged without rough lines.

  See you soon! Any suggestion would be appreciated.

  .

  BRI,

  I just read it again.

  align the center of horiz/vertical

  works on objects, rather than Anchor Points.

  You can have triangles which fail to assemble completely.

  Try this, smart guides are your friends:

  Starting with the last triangle (you can see the stacking order in the layers palette), click the path to find) and work your way upward as follows:

  1) click on the lower triangle with the selection tool.

  2) click on one of the neighbors, and move it to the bottom to be second in the stacking order, then move it a little far, then ClickDrag back by one of the Anchor Points to be aligned corresponding to the lower anchor (Smart Guides say anchor when you are there).

  (3) with the ClickDrag Direct selection tool other anchor Point to snap (you can drag a bit far and back until the Smart Guides say anchor);

  Who should ensure a full adjustment between the two less triangles

  4) continue until you are finished with the other triangles.

• vertical white line on the printed document

  A vertical white line appears on all printouts.  The text print normally on the white line on color documents. on black and white documents, white interrupted the printed text, how this can be fixed?

  I use a portable printer Officejet 8500 a Premium with Windows 7 Ultimate.  However, the problem has resolved spontaneously.  I cleaned and aligned several times and my assistant copy a number of documents on the printer and then printing my document there was no evidence of the vertical white line.  Thank you very much for your help.

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.