White point

did someone had the white point like a hole above the front camera near the black dot on your iPhone 6s? I am new to iphone and so curious. Sorry

No, I did not, never have I heard of this before.

Can post you a photo to show exactly what you mean?

Tags: iPhone

Similar Questions

  • The Qosmio G40 display white point

    I need to calibrate my monitor for my G40, but white point information are missing. Anyone know what is the white spot?

    Unfortunately, this page Web from Toshiba provides this information.
    I think you should check the user manual. Maybe you'll find something useful.

    PS: just for the record;
    http://www.ThePluginSite.com/products/Photowiz/ColorWasher/manual/monitorcalibration.htm

  • U2713H / white point Calibration Software Dell precision

    System: Windows 8 x 64

    Calibration equipment: i1Display Pro

    Hardware calibration: Calibration Dell - 1.0.0 software 1.0.1 1.5.1

    Calibration of the software: Argyll v1.6.2, dispcalGUI v1.5.3.1 (spectral correction matrix)

    Monitor: U2713H

    I tried to calibrate them and profile my system with the above settings. The question is: Why am I not able to precisely define a D65 whitepoint using domain controllers for the calibration of the equipment? Each software version Dell lead a difference of temperature of about 100 KB (average) each time. This translates into a cold shade on my monitor. I tried two predefined calibration options and customized in the software in three areas of color (sRGB, aRGB and native). The values used are D65, 120 cd/m ^ 2, gamma of 2.2. I tried the XML hack so for 1.0.0 but 1.0.1 and (at least) 1.5.1 should include as a default?

    Here is a report of one of the dispcalGUI ARGB tracks:

    https://DL.dropboxusercontent.com/u/20428915/hardware_aRGB.html

    Instead, calibration software in dispcalGUI is more or less on the spot. This is a report for the native color space:

    https://DL.dropboxusercontent.com/u/20428915/software_native.html

    Can someone shed light on this issue? Is my workflow calibration flawed or HW software Dell just this wrong? Changing white point is clearly visible and completely unacceptable. Also, I wonder why the dispcalGUI assume 6600K white point in reports?

    I did ' t need XML hack in DA 1.5: before calibration under the icon display and serial No. There is a text with applied BDU, RG_phosphor.

    Measure right after seeing the ArgyllCMS reports and cost of DEVELOPMENT. Look at the white point of profile (see additional statistics). So the problem is that DA is calibrated WRONG, but it measures right. Calibration is just against the profile, but the WP profile (and measured) is not very close to the curve of daylight. It is proposed to green in a plot of xyY (0,310, 0.33 x), a D65 moved to the Greens

    ArgyllCMS working properly assuming a 6600 K D whitepoint to evaluate WP measured. Color temperature is not as important as many people think. It is more important than the white point is if it is in the light curve. ArgyllCMS choose as "asumed WP daylight" closest point in the curve of daylight to WP measured. It is very close to the curve of daylight it is very dificult for the eyes to notice of 6600-6400 K

    Subject of your problem. I think there are two ways to do this kind of bad calibration:

    1 - may be you have some color improvements active GPU. Search for "digital vibrance" in nvidia Control Panel, set it to 0%, the look of the similar things FRO in ATI Catalyst Control Center. I have suffered from this problem with 1.0.0.0 and my old nvidia GPU. Then she re - calibrate with the DA.

    2 - there are a few flaws not fixed with 1.5:

    One is that there is need MORE calbration patches to measure native gamma. No response from Dell

    Another is the luminance in fixed after writing the values of LUT3D. Change the contrast of luminance or changes of WP. Backlight LED - GB is more or less predictable. Dell/Xrite must patch its software, first of all make an aproximation + 50 cd for desured luminance, then put WP desired with LUT3D and the last to refine luminance/lower luminance in measures very tine. Of couse, it would be preferable to have an iterative process, but I doubt that this will never happen with Dell or Xrite.
    For GB-LEDs: more brightness OSD rises, the colours blue and Red occur. More contrast OSD triggers more green hue is displayed on the screen.
    It seems you case (you have more green WP coordinates as you want). You can try this:
    -Place you CAL1/CAL2 OSD
    -Open DisplaclGUI, "calibrate button" with D65 target, start measuring WP with the three RGB bars. You're not calibrate, it's just to measure WP.
    -Open OSD, brightness & contrast. Try to decrease the contrast by no 1, to be careful of in DispcalGUI measuremet window. Please note that this will lower the luminance to 110-115cd, but if it fixes WP I think it is aceptable.
    (--Once an acceptable WP is reached)<2dE), close="" calibration,="" cancel="" it.="" in="" dispcalgui="" do="" a="" "profile="" only"="" to="" caracterize="" your="" screen="" (not="" to="" calibrate="" it),="" check="" that="" "embed="" current="" calibration="" curves"="" and="" "reset="" calibration="" curves"="" are="" enabled.="" do="" a="" xyzlut+matrix="" profile="" or="" the="" one="" yo="" like="">
    -Run check the profile against the new profile.

    I hope that one of these two solutions to work for you

  • How to return a query all the elements for an LOV if I select the "white point" (in this LOV)

    Hello. In my application, I have a classic report where, in a region, I built a toolbar with three Popup LOVs which interact with the report. Each LOV displays different items and returns the value according to the selected item.

    For example:

    Popup LOV 1 named P33_DEPARTMENTS has the following components: production, development, projecting, ecc.

    Popup LOV 2 named P33_LOCATIONS was the following: Europe, America, Asia, Africa, ecc.


    Popup LOV 3 named P33_DEVICES has the following: printer, keyboard, mouse, monitor, ecc.


    If I query the table to return the lines according to the selected in these LOVs I have something like this:


    SELECT * FROM < table > WHERE the dep =: P33_DEPARTMENTS AND loc =: P33_LOCATIONS AND dev =: P33_DEVICES


    Now I want that if the user selects all values (LOVs one white point) (or all), then the query must return all values for that LOV.

    For example, if for the named LOV P33_DEPARTMENTS 'white' value is selected, then the query must return to the table lines this cointain values "production ' OR 'developing' OR 'project', ecc for the columns named"dep".

    This means that must be the operator AND between LOVs but the operator or inside the LOV even, if the item is selected.


    How is it possible? Thank you

    SELECT *
    FROM T
    WHERE dep = nvl( :P33_DEPARTMENTS, dep)
      and loc = nvl( :P33_LOCATIONS, loc)
      and dev = nvl( :P33_DEVICES, loc)
    

    You just need to ensure that, when no value is selected, the LOV will return a NULL value.

    MK

  • Develop the preset for the black and white Points

    Is it possible to create a preset that will find the correct point black and white individually for each photo to import?

    The [auto tone] button in the quick develop Panel is as close you will arrive at an Auto setting of the black and white points.

    But many find it also changes exposure requiring several slider adjustments.

    You will get the best results if you hold down the [ALT] key when you move the black and white sliders, or press 'J' to set the clipping indicators in the histogram of mode of development. (Blacks show blue, white and red)

  • Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

    Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

    I tend to use after correcting the highlights, shadows, brightness, clarity and contrast may be. In the latest versions of LR you can simply double-click on the word white and black all in now the SHIFT key. Which will automatically define the ends of the histogram. It works fine most of the time, but sometimes I need to go back a little off.

    See this tutorial:

    https://www.YouTube.com/watch?v=_lRkB7oGl80

  • Black or white point in LR Mobile setting

    In Office LR, you can hold the Alt (Option) key while moving the black or white Slider in the develop module to set the White Point and Black Point.  Will there be an equivalent action in LR Mobile? What is it?

    Drag the black or white Slider in Lightroom on mobile with two fingers instead of one.

  • Tecra M3 - black and white points

    IM problem with my Tecra M3,

    I have the Toshiba logo came fine.
    Then a bunch of black and white, (its windows when crashed and gives you option in safe mode) but you can't get out of the text, I only know because Ive delt with computers crashed before.

    Start windows XP SP 2 basically there is a white bar at points vertically and scroll down.
    Then finally goes blue screen of death and reboots.

    I changed the HARD drive with my old operating system if it is not a virus, I've agreed with the ram, which is 2 x 1 GB sticks.
    Ive tested individually and together, and yet I still get the same problem I mentioned above when I start my computer.

    If this isn't a virus or HARD drive, it is not the ram, what is the problem here? The screen looks fine with the toshiba logo (no points from top to bottom)

    What do I need to fix? What is broken?

    Someone who can help much apprciated.

    see you soon

    Why put 2 times in different threads on the same issue?
    Check this box:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=182726

  • The white point with the gray ring around him say what on him find my iPhone application?

    I have the iPhone 6 Plus and when I use Find My iPhone app I see several white dots with a gray ring around them. Indicate the points?

    This may mean that the devices are offline. iCloud: find your device

    It is in offline mode, which looks like:

    -AJ

  • Vista starts and has a black screen with a white pointer, what should I do?

    I have a toshiba satellite laptop computer with vista.  It seems to boot into an operating system, but I don't see a white mouse with a completely black screen pointer.  Is it a problem of theme, and in this case how to fix?

    Hello

    Try following the methods provided below and see if it helps:

    Method 1:

    Try logging in safe mode and check if you are facing the similar question:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If you are able to boot into safe mode, you can try a clean boot

    How to troubleshoot a problem by performing a clean boot in Windows
    http://support.Microsoft.com/kb/929135

     

    Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

    Method 2:

    I would say that you want to run System Restore in windows recovery mode and check if it helps. See the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Method 3:

    I suggest to update the graphics drivers on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, try to restart the computer by pressing F8 and in the advanced startup options, select Enable VGA Mode and check.

    Disconnect external devices and check

    Hope this helps,

  • SCREEN BLACK WITH WHITE AFTER START POINTER

    I went on vacation and turned off my computer.  When I got home, I stupidly plugged in my blackberry storm, while the system was starting the system.  Now all I get is the black screen with the white pointer stupid.  I tried the solution of Task Manager and a few others who were listed in the similar questions to no prevail.  At one point I did a boot repair tool and he returned with it could not repair the iso standards, ico or something like that.  I did a system restore to an earlier date to before I left and that did not help.  Please help me.  Thank you.

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (a line type or copy and paste one line at a time and hit enter - enter a bracket)
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Big white spot on XBR65X850D new

    This big white point has just appeared this morning on my 65x850D XBR. TV is only 2 months old. I called Sony support and they will not fix it. They said it must be greater than 100 pixels. So apparently I spent 2 grand on a TV and got a nice white point to go with it. Awesome SONY, good job!

    http://imgur.com/P8gaicy

    This isn't the solution. You know what was the solution? Had a relationship with SONY. I have 5 PS3, PS4 3 and a few 4 k SONY TV whose size varies from 65 "- 75". You know what else. I will never buy another. Your solution is repasted *. You guys might as well be a kind of automatic response system. Yes its dirt or a stain. People pay thousands of dollars for electronics and live in dirty houses and didn't clean our TV screens. What would you say this one, SONY products have lately been *. I have shouldve stuck with OLED LG or Samsung. They will be; service at least of their products. I went back to buy Besy, where I am Premier Elite, they swapped TV no questions asked. It was beyond the return date, but they appreciate me as a customer that I spend 20 grand or more a year ago. So SONY, you can * my *.

    How about you, you mark this as a solution you * *.

  • New feature request: white printing setting the balance in the print Module?

    At the present time, the print Module has adjustments to compensate for the brightness and contrast prints. It would be very useful to also add the White Balance, because usually screens are calibrated to another white point and prints are warmer.

    Thank you

    If everything is calibrated right you shouldn't need the brightness sliders, contrast, or the Balance of whites in the print Module.  They are just hacks.

  • non-white level eyedropper

    When I use the white eyedropper in levels adjustment is what makes the dark image and becoming a dull green yellow white areas. Always worked before he white point definition but suddenly stopped working. Any ideas?

    Solved myself. Double click on the eyedropper allows you to calibrate.

  • White and black clipping

    Please can someone tell me what number would mean that I have at least a pure black pixel and at least a pure white pixel...? I realized that 0.01% does not work... But 1 give the impression that it is left on top... I want to go until I get to cutting, but no more. What number would provide it?

    image.jpg

    If they are RAW files, then it is better to set black and white points in ACR.  If you Shift open the RAW file converted to open as a smart object, these settings are non-destructive and can be changed.

    Black and white point setting by the numbers in Photoshop is risky, because none of the two images are the same.  You can block the noisy shadows, or ignore the specular and set the white point on a more significant part of the image.  So if you really want to settle these points within Photoshop, a better approach might be to use a levels adjustment layer and hold the key of the Alp (Opt) while dragging the black and white sliders.  This puts the image threshold mode, so you can see exactly which parts of the image are clipped, and channels, or combination of channels are to be cut.

    But using the ACR is a no-brainer.  You have the number of complete image bits to play with to start.

Maybe you are looking for

  • BT Homehubs... AAARRRGGGHHHH

    Exasperated, is a Word to describe how I feel... but directs them to the CabSav Wolfblass, must so fluffy soon... I think I have another post similar to this elsewhere in this forum, so bear with me... I already had a BT Homehub 1.0 (circa. 1960' ish

  • 179tx 15ac HP: hp 15ac179tx not find bluetooth device

    When I connect my laptop with my cell phone he found no mobile device looking for bt do not find it please help

  • Sysax Multi Server cannot be started

    Hello When the server is started, the message "the Sysax multi Server does not start. In Control Panel, I had selected the default ports and had chosen the FTP server. Sometimes the message "server is running" appears, but when I go to the HTTPS serv

  • can not update vista 64 - rerceive Error 80070426

    I have a dell xps with vista 64 studfio - I am unable to update - I Error 80070426. someone please help! Thanks, dave

  • printer error no active 20

    Download the software "printMaster 18, now cannot print I have epson NX415, I did my default printer, I noticed after downloading PrintMaster there is an other"peripheral"in my print devices listed as printer broderbund."   I just want to print Help