White screen after starting the desktop computer

Similar Questions

• Gray screen after starting the Satellite L50

  Today I received a completely gray screen after starting the Satellite portable L50; the touch mouse moves but don't button start etc. Lap top is only 2 weeks.

  Any advice?

  jade2014

  Hi jade

  It is not easy to say what the problem is here. What did you do when you saw gray screen?
  Is there a possibility to completely shut down windows and reboot the machine?

• White screen after that the virus KLPD, same save modus starts

  Hi, yesterday while surfing the internet has become my white screen, it was the virus KLPD. I found on the internet that I had to download the kaspersky rescue disk and run it on my pc so I could scan my pc on the virus and after that my pc should be normal. So I did what they asked, but now, whenever I start my pc, when I would have my office, I get a white screen and when I pres ctrl + alt + delete I can get in the menu but the management tasks does not start. Now my question how can I come back all my documents and work normal again to my laptop. Its a HP Pavilion dv6000 Entertainment PC.

  Thank you

  Hey AlexDedeur5,

  You may be able to create a Live CD. This is a CD with an alternative operating system that runs completely from a CD rather than your hard drive.

  Using a Live CD, you can access your hard disk just like you acceding to a flash drive. You can copy and paste your files from the hard drive of your laptop computer to a flash drive or external hard drive. You will need to scan that disc flash drive/external hard with a reliable anti-virus program before opening or transfer these files to avoid infecting a second computer.

  To get a very good Live CD is Knoppix. I used it before a couple times to get data from infected computers and hard drives, partially damaged by a fall. Here are some links that provide you with more information about Knoppix.

  How to recover data in Linux

  5 tips for using Knoppix to recover data to a PC starts plu

  How do to retrieve the files from the laptop with Windows crashed using the Knoppix CD

  Once your data is backed up and scanned with an antivirus, you will need to re - install Windows on the hard drive of your laptop. You can have a recovery partition which you can access by pressing F11 as the computer powers on. If you do not have the HP Recovery Manager, choose System Recovery to factory settings.

  If you are unable to the HP Recovery Manager, or it has been lost due to virus, you will need to re - install Windows with a set of recovery disks. If you do not already have your own records, you can order them through HP. If you could provide me with your exact product number (and your country if outside the United States), I could link you to your order for your particular laptop. Here are the steps to finding your product number.

  Please let me know if you have any questions or if one of these suggestions helped (this might help others with the same question). I'll keep an eye out for your answer!

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• White screen after using the malicious software removal tool.

  Recently, I had a virus. I continued to ger of critical hard drive errors, System Restore is necessary and that it would cost about $75.00 for it. I looked this error and what I got from a forum like this, it's that I need to remove malware from my computer. I did this and restarted my computer and my screen is white, I don't have any programs on my computer. I need help how to do? I use Windows XP. Help, please. The only way I have access to the internet is via the mode without fail, my documents, pictures, music, shirts of ranking, it's all gone.

  Hello
  Your computer is still infected by a virus. Try following the steps of this virus/malware removal Guide (in Safe Mode): http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections.
  I hope this helps you,
  Brian

• Tecra A7: white screen after removing the screen from the laptop

  I wanted to look inside my Tecra A7 to see if I could install another HD I had to hang out (no, I'm not particularly familiar with the hardware of the laptop), so I've undone the screws and began to open the case, but then realized that it would be as easy as opening an office, so I closed the case and put all the screws back in.

  The problem is, now, the LCD does not work. It doesn't seem to be simply the backlight. Everything is fine, and I can use if I plug a separate CRT monitor. I think the problem might be just that a plug inside the laptop is loose.

  Any ideas?

  Hello Lord

  I really hope that you will be able to deal with it, but I do not understand why you do this without maintenance manuals. Laptop has so many small plastic parts that can be damaged by accident. Disassemble the unit yourself is the big risk.

  I am also afraid that the guarantee may be expired now.

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Whenever I start my desktop computer, he goes to the BACK and informed me that my CMOS settings are false.

  Help! It started to happen last week and I don't know what to do. Whenever I start my desktop computer, he goes to the back and informed me that my CMOS settings are false. How should I address this!

  original title: CMOS setting

  It mahy be as simple as needing a new CMOS battery.  If you are not under warranty and have a counter top it is usually fairly easy to replace (google your computer for more information).

  If that doesn't fix it, you may need to reset by removing the battery, unplug the power, remove the dough (if any) and now the power button is for one minute.

• How to stop the blue e screen to start the computer and also if you try to download anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  How to stop the blue e screen to start the computer and also if you try to download anything:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
  provide us information. Also the methods here can help you solve the bluescreens.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I'm rewarded with spinning

  I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I am rewarded with the spinning of beach all dead. Any suggestions?

  Hi,

  Please see the below help document to solve the problem:

  Does not open App | Wheels of progress turn continuously

  Kind regards

  Sheena

• White screen after login (Vista)

  After updating my computer this morning, the screen now becomes white after I connect. I looked around for finding bugs, but so far I can't make anything of them because my screen does not return to normal. I tried to put it to sleep, hit escape and using the Windows key on my keyboard but I get no response from either of them. CTRL + Alt + Delete displays the usual screen, but none of the available options help to solve the problem.

  Translates into a safe mode black screen after log in and the same problems.

  I would try to do a system restore, but I don't have a disk for Vista.

  Hello

  A white screen may have the same root cause as a blackscreen and be too difficult to treat. Try
  This generic troubleshooting remember black and white the same fix would work. See following message
  If you can't at least win a minimum level of access work.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.