white screen after that vista went on mode 'sleep'

Similar Questions

• White screen after login (Vista)

  After updating my computer this morning, the screen now becomes white after I connect. I looked around for finding bugs, but so far I can't make anything of them because my screen does not return to normal. I tried to put it to sleep, hit escape and using the Windows key on my keyboard but I get no response from either of them. CTRL + Alt + Delete displays the usual screen, but none of the available options help to solve the problem.

  Translates into a safe mode black screen after log in and the same problems.

  I would try to do a system restore, but I don't have a disk for Vista.

  Hello

  A white screen may have the same root cause as a blackscreen and be too difficult to treat. Try
  This generic troubleshooting remember black and white the same fix would work. See following message
  If you can't at least win a minimum level of access work.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• White screen after that the virus KLPD, same save modus starts

  Hi, yesterday while surfing the internet has become my white screen, it was the virus KLPD. I found on the internet that I had to download the kaspersky rescue disk and run it on my pc so I could scan my pc on the virus and after that my pc should be normal. So I did what they asked, but now, whenever I start my pc, when I would have my office, I get a white screen and when I pres ctrl + alt + delete I can get in the menu but the management tasks does not start. Now my question how can I come back all my documents and work normal again to my laptop. Its a HP Pavilion dv6000 Entertainment PC.

  Thank you

  Hey AlexDedeur5,

  You may be able to create a Live CD. This is a CD with an alternative operating system that runs completely from a CD rather than your hard drive.

  Using a Live CD, you can access your hard disk just like you acceding to a flash drive. You can copy and paste your files from the hard drive of your laptop computer to a flash drive or external hard drive. You will need to scan that disc flash drive/external hard with a reliable anti-virus program before opening or transfer these files to avoid infecting a second computer.

  To get a very good Live CD is Knoppix. I used it before a couple times to get data from infected computers and hard drives, partially damaged by a fall. Here are some links that provide you with more information about Knoppix.

  How to recover data in Linux

  5 tips for using Knoppix to recover data to a PC starts plu

  How do to retrieve the files from the laptop with Windows crashed using the Knoppix CD

  Once your data is backed up and scanned with an antivirus, you will need to re - install Windows on the hard drive of your laptop. You can have a recovery partition which you can access by pressing F11 as the computer powers on. If you do not have the HP Recovery Manager, choose System Recovery to factory settings.

  If you are unable to the HP Recovery Manager, or it has been lost due to virus, you will need to re - install Windows with a set of recovery disks. If you do not already have your own records, you can order them through HP. If you could provide me with your exact product number (and your country if outside the United States), I could link you to your order for your particular laptop. Here are the steps to finding your product number.

  Please let me know if you have any questions or if one of these suggestions helped (this might help others with the same question). I'll keep an eye out for your answer!

• BlackBerry smartphones white screen after that I entered the wrong ID password too many times

  Hello

  I was trying to sync my blackberry information to my computer laptop when I was asked the ID password, I tried a few options but could remember nothing. When it reaches the last attempt of the screen says that if I entered the wrong pin code it would erase all of my information. I stopped went to the site and changed my password to make sure, so I went back and entered the password. Immediately the screen turned white and began to clear all. I pulled the battery immediately and have been frantically the Internet a way to undo it. Please please please help.

  I have so many things on my phone, I really need. Especially my baby :-(videos

  Can someone help me.

  Hello and welcome to the community!

  Failure of the BBID credentials will never wipe a BB. What actually happened, was that you entered correctly your password user - created lock too many times, and he went with the unit, in accordance with the requirements of the security level agreed upon activation of this function of wiping. There is no way to stop it.

  I'm sorry.

• A1312 why my stay white screen after that I have power, no response on the keyboard, please help

  I need assistance with my A1312 once I turn on screen stay white that no answer on the keyboard can do anything :/

  OK... what OS X is installed on your iMac? Troubleshooting tips depends on this information.

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• computer only blinked a cursor in the corner of a black screen after that it shuts down. Was it an accident?

  Original title: was it an accident?

  My computer only blinked a cursor in the corner of a black screen after that it shuts down. then the fan stopped running current and the screen went blank, but I could still hear the hard drive running. Was it an accident?

  Yep, especially if she does not return.

• After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem

  After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem again.  The computer turns off and sometimes it takes me an hour or two to get started again.  Help, please!

  refer to this article and move forward with the NVRAM reset at the end.

  Reset the management system (SCM) controller on your Mac - Apple Support

  If the problem persists, how long have you made it Go?

  I would bring out there, but first call Apple.

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER after that I went from authorized by authorized by ID on the same computer book, how can I open open that same book?  I have downloaded the book even once, reinstalled the digital edition but no help? If anyone can

  E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER after that I went from authorized by authorized by ID on the same computer book, how can I open open that same book?  I have downloaded the book even once, reinstalled the digital edition but no help? If someone can answer that would be a great help.

  check: Error: E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card

  Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.

  I went to update this driver.

  On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.

  I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.

  I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.

  I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.

  I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.

  I thank you very much for any solutions or advice, you should be able to provide!

  All the best,

  -Evan

  Hello

  Please restart in safe mode, and then do the following

  Start - right click my computer - manage - Device Manager - adapt display - nVidia...

  Right click - Properties - driver tab - back driver.

  This should bring back your previous working driver.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.