White screen C720 cannot create recovery image

Similar Questions

• Cannot create the image of the system due to an internal error

  Widows 7 cannot create an image system due to an internal error.

  What should do?

  Original title: the system image

  Hello

  Please contact Microsoft Community.

  I understand that you can not create the system image.

  I will definitely help you with this.

  What is the exact error of the internet you found?

  I suggest that you go through the links below:

  Refer to the suggestion given by Shubham Chaubey said may 17, 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/unable-to-create-a-system-image/1f1011e6-468d-4AE1-99bd-c9be27677b41

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.

• Pavillion15: cannot create recovery media when plug sandisk Flash Drive Cruzer 32 GB Force

  I put my new 32 gb sandisk Flash DRIVE on my pc and then followed the steps HP support assistant to create a recovery media. I get a message to say the minimum 22 GB capacity. He gets 90% and then comes up with a message saying that we live errors in the creation of recovery media. Please try again.

  Hi @JS100,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand you are trying to create a recovery on a USB media.  The process is progressing well until it gets to 90% and fails then indicating that she has problems in the creation of recovery media.  Please try again.

  Please use a white, not more than 32 GB and USB flash drive high quality brand not like Windows compatible 8.  As he only missed the first attempt, I suggest that you format the USB key before you re-attempt to create the

  image.

  Here is a link to the computers HP - create a recovery Image on disk, or save a recovery Image on a Flash USB (Windows 8) drive that can also help.

  If you are unable to complete the creation of the recovery media please contact HP support for assistance.

  Contact HP to Contact HP Support assistance

  To say thanks for the reply please click the thumb below.

  If you have managed to create your recovery media. Please select solution provided to help others who may experience the same difficulty.

  Good luck!

• NB100 - cannot create the image of the main partition

  Hello.

  I am a Toshina NB100 user and I am happy with my netbook, but I have a problem.

  I always work with partition on my hard drive. 20GB primary partition and the secondary partition have 100 GB.
  I have the windows xp operating system on the primary partition, and on the secondary partition I music, photos, programs, games, etc.

  When I want to created an image of my main partition with Acronis partition magic or with other programs the NB1000 do not recognize the hard drive, the machime write a caption "I can not find the HD. I thing that the problem is the fault of the Bios.

  Anyone know of this problem? or maybe someone could do?

  Hello

  I doubt that it is a BIOS problem.

  The fact is that the laptop uses the SATA HDD controller and your imaging software cannot recognize the HARD drive due to lack of SATA drivers.

  The Intel Matrix Storage Manager package located on the Intel page contains the necessary files to the SATA.

  Good bye

• Cannot create recovery media

  Attempting to create a recovery media for my new laptop Toshiba L-500; I get the following error message:
  {Cannot read the following file.
  D:\ZZImages\ZZImages\PREINST13. STORMWATER MANAGEMENT
  (Code d'erreur: 020150-20-00000000)}

  This has happened while creating recovery disc 1 and disc 3... with the same error message. considering that the Recovery Disk 2 was created without any problem.
  I tried burning the files again for discs 1 and 3, which could once again, but 2 disk has been created again successful without any problem.

  Please indicate the possible solution.
  (4.7GB//120Min//16X used transonic DVD-R) to create Recovery Media Creator Toshiba recovery disks)

  Try to use TDK or Verbatim DVD-R. I used these empty discs to create recovery discs on several different Toshiba laptops and every time everything was fine.

  It seems crazy, but you may have problems using some some discs.

• Cannot create an image map [was: where are the panels?]

  Where is the sign that used to be left? I want to make a link of the rectangular map area (image map) after a few hours, I had the 'map' appears in the properties (for those wondering I had to be in design mode in the upper left and upper right dropdowns select design and image). The next step is to choose the tool circular or rectangular to select an area, but where is this toolbar now? How do you get it to appear?

  Edited by moderator subject line.

  You can create interactive images only when the Document window's Design view. It must also have an image selected at the time.

  Image maps cannot be created in Live view mode.

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Cannot install recovery image on Satellite C660

  Hello
  I tried to restore a Satellite C660 factory settings because it be extremely slow to start.

  Using the original Toshiba recovery disks the process gets to half way through and then gives the following messages...

  Error restoring image
  The device is not ready

  ERROR: ImageX could not be Win7 V:\HDDRecovery\SWImg\15489XSP.swm Index 2 HARD C: drive!

  If someone can advise?
  Thank you

  Unfortunately there is no workaround to force the recovery image installation runs correctly.
  All you can do right now is to set the BIOS to default settings and use the drive recovery again.
  Make sure that the disc is clean.

  Do you use the recovery disc for the first time?

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• Cannot install recovery image on my Equium after upgrade HARD drive

  Hello

  I just installed a new hard drive for my Toshiba laptop Equium I contacted Toshiba who informed me that I could mount up to 1 TB, I opted for with a 500 GB at halfway.
  After installing the drive I inserted the disc of recovery after a while, it was loaded with the operation completed successfully message. Next message put in place windows could not configure windows to run on this computer hardware. Then windows could not complete the installation to install windows on installation, this restart of the computer...

  At the end of the restore process a message tells me to remove the recovery disc and output as soon as I get the laptop stops and doesn t re boot automatically. During the next restart windows message Vista starts for the first time then the cycle starts again. I tried to reload several times recovery according to the instructions, but not good.

  Any help much appreciated

  I put t know which model of laptop you have, but if the recovery image is Vista, it must be quite old model, maybe Equium A200.
  To be honest I didn't experiment with the upgrade of the HARD drive on older models, but I can imagine the image recovery are a problems with hard drives with huge capacities.

  Display please model name and which HDD you inside now.
  By the way: if possible, try to install Win7 using Microsoft installation disc. I m it will be safe works without any problem.

• Cannot create disk image writable, case-sensitive on El Capitan

  Hi all

  It is my first time posting, so bear with me, pls if this seems to be a stupid question.

  I tried to create a HFS disk image + case-sensitive (logged) on my MacBook (early 2015 model. OSX El Capitan 10.11.2).

  The goal is to build Android AOSPS (according to the website of the AOSPS, case-sensitive file system is required).

  But so far, I was not able to successfully create a desired image (sensitive to case AND write).

  With "Disk utility", I was able to create an image in writing (i.e. when mounted, the file system is read/write) but not case sensitive.

  Why is "Disk utility" unable to do so because it provides even an option for "logging case-sensitive HFS +?

  Then I tried to use "hdiutil create" tool command-line (based on the results of online research), which has succeeded in creating case-sensitive, but read-only images (i.e. when mounted, file system is read-only).

  I tried different combinations of "-format ' & '-fs ' options, but nothing seems to work so far.

  With the help of 'hdiutil convert' does not help.

  All opinions are appreciated.

  Thanks in advance!

  This is a bug. The solution is to clear the disk image mounted in disk utility, choose HFS case-sensitive like the format.

• VAIO SVS13A290X cannot create recovery media

  Hello everyone!

  I have just bought a SVS13A290X, win 8, vaio care 8. Just after I tried to create recovery media, but I couldn't.

  There is no possibility to do in vaio care. He do not have a restore option, but not the option to create a recovery media (sic).

  I went to the Sony esupport site and there is an old video on how to create a recovery media. But it does not match the real software.

  I did all the updates with windows 8 and the sony software and nothing has changed.

  Anyone else had this problem with this model PREMIUN SVS?

  Caesar

  Uninstall and then reinstall vaio care and updating

• Cannot create recovery discs

  Just got my new HP Envy 700-215xt.  The first thing I did was to create the recovery disks. Disc 1 was not a problem. Disc 2 was defective, but worked on the new attempt.  Drive 3 failed 4 times.  He hangs at 0% to check then said to use a high quality white.  I use Taiyo Yuden, and I probably had a failure in my last 2000 burns. Any thoughts? Discs can be purchased and if so how?

  In fact one of the Post-it notes on the recovery said to try to disable user accounts.  Did this and it worked, go.

  Thank you for your time and the suggestion.