White screen on my Satellite A300

Similar Questions

• White screen on my Satellite M34-S456

  -Do not know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  I got a white screen with a blinking cursor in the top left of the screen for days.
  Try of BIOS (via F12 F2 &) & kept getting the white screen).

  Now that is reloaded. How can I know what is the problem?
  And how can I prevent or fix?

  For example, if it is a problen w / my HARD drive (I'll buy a new HARD drive) vs my CD/DVD, etc...

  Any suggestions?
  I have a feeling that the problem is not resolved, & as soon as I stop I get the blank screen again.
  FYI-I think that put the HARD drive in the freezer for the night may have been key to get there surgery - seriously.

  > - Don't know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  > I got a white screen with a blinking cursor in the top left of the screen for days.

  This symptom of the computer appears generally if the master boot record (MBR) on the hard drive is bad or damaged.
  It may happen due to the mechanical stress of HARD drive.

  I had the same problem several months ago and solved using the command: fixmbr or fixboot

  Concerning

• White screen powering a Satellite 1130

  I bought a second hand by Satellite 1130 laptop not too long ago and it worked fine for awhile but then it died on me... When I turn on the laptop the power light on the front comes on but nothing else. Laptop computer knows that it is on, as the DVD drive scans for a disc and the cooling fan starts but nothing else happens. The screen remains blank and I can't do anything with it. While he worked, I noticed when it has been turned on the the hard drive led on the front of the laptop used to Flash several times then it loads the operating system. THIS DOES NOT EVEN LIGHT MORE. This made me think it may be the hard drive that was dead, but told me that if that were the case, the laptop screen would have at least a cursor in the upper left corner of the screen and one would expect it a command to the user.
  ANY HELP WOULD BE APPRIECIATED...

  You re right. It doesn't seem to be a malfunction of the HARD drive.
  If the HARD disk is damaged, you will see a splash screen Toshiba or with a few s information on memory, CPU, etc, then he should try to boot from the HARD drive.
  In your case I think there could be a malfunction of the motherboard.

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• White screen on a Satellite 3000 214

  My wife has dusted off the keyboard while the machine was running and now the screen is blank!

  I tried Fn + F5, but no use. It could be that she unwittingly supported on Fn F1 and set up a password (to random key strokes while dusting). I have never used this feature before - just discover it in the manual.

  Anyone know how to unlock, or other ideas, please?

  Thank you very much!

  Peter

  What do you mean that your screen is empty? You mean that even if you turn off the computer and turn on again, the blank screen persist?

  Please tell me more...

  Welcome them

• White screen starts with Satellite P series

  Hello

  My computer starts normally when I turn it on but the screen is black. I have re - start several times to have the screen on.

  What's wrong?

  WIndows 7 64 bit

  Right on this virtual path is not easy to say what the problem is here.
  Since when did you notice this?

  Have you installed any updates or anything that may be responsible for this?
  When you say that the screen is black it means that the screen is black but the background light work or the screen is totally black as when laptop is turned OFF?

• Satellite A300 - 21 c - impossible to adjust the brightness of the screen

  Hello

  I am not able to adjust the brightness of my screen on my Satellite A300 - 21 c - control panel-> the menu options of power does not give me the opportunity to do, and my Fn keys do not work either (can't adjust the brightness).

  The operating system is Win. XP Pro - SP2

  Any help would be greatly appreciated. Thank you!

  Hello

  You can adjust the brightness of the screen using Toshiba Power Saver? With this tool, I can set the brightness of the screen for Macintosh (AC adapter) and normal (battery). I like it a lot because I can also put more options and you can download it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  For the FN keys on your laptop, you need the tools Toshiba you can find on the site of Toshiba, too.

  Welcome them

• Satellite A300 - 1 L 0 - display compatibility question

  Hello!

  One of my friends got a Toshiba Satellite A300 - 1 L 0 Notebook with broken screen.
  On Ebay that he was lucky to get a laptop Toshiba A300-1HP, which is optically identical to his book and regarding the roadmap Toshiba product has almost the same technique except the Core 2 duo model, ATI HD 3xxx model specifications and the size of HARD drive, as far as I can tell. The screen has the same features on the product sheet.

  More on ebay, there are "universal" sold screens for satellite A300 - meaning if you type "Satellite A300 Display" didn't it specify which A300 model you have.

  What you mean?
  Are the poster at least "Pin Compatible" or why it has an engineer / engineer use a different layout of the pins on the same box for laptop?
  The A300 has more motherboards even?

  Thank you!!!

  Hello

  I guess that all screens for a Satellite A300 series should be compatible with the unique Satellite A300 model.
  All laptops Satellite A300 was equipped with a TFT 15,4 "billboard and it is the most important fact. You must use this display TFT 15,4 "Panel.

  The resolution may be different and will not affect the display compatibility because the graphics card is able to support different resolutions.

• Satellite A300 - screen is just white

  I got my Satellite A300 a year ago and it has worked great so far. It's the first time that this has happened but when I turn the computer laptop everything looks like it's turning on ok, but the screen remains white. Everything seems to work ok with the laptop, but there is no display...

  I tried to disconnect the battery and use it that way. What should I do?

  Hello

  Have you tried to plug the external monitor? Check what is happening...

• Satellite A300-1LT won't boot up - white screen & no HARD disk activity

  I had a problem, the touch pad does not work.
  I found on the internet solution to stop computer, take out the battery, wait a bit and try again.
  That's when my problems start.

  When I put the battery back on, I turned on the laptop.
  White screen (nothing happens), led indicators are on (except for the hard disk), cd drive tries to read but nothing happens and the fan is running.
  I tried everything I could find (wait 30 minutes, take out, start without battery battery, etc.) but no luck.

  My lap top is Satellite A300-1lt, and I got 2 months.
  I don't want to take it to the service, unless it is really necessary, because I really need now, I can't wait for weeks until what he returned.

  Please can someone help me out, Im desperate...

  Thanks in advantage...

  Connect your laptop (with battery) to the power supply and leave an hour, try to restart your laptop. If portable starting again let it run until the battery will be fully recharged.

  I hope that it will work properly again. I had a similar problem with my Satellite A300-1LI, and I do this. Laptop now works perfectly with or without adapter.

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• Satellite A300 - Strip on the bottom of the screen

  Hello

  I don't have why the graph at the bottom of my screen is completely ruined. At the bottom of the screen, it appears a stretching from 3 cm big, white and flashing strip (half transparent and half composed of tiny black horizontal lines parallel) across the width of the screen. In addition, there is a very narrow line vertical, blue light, also spanning the entire height of the screen.

  Below are the details of my computer.

  Could anyone suggest me how to do it please?

  Satellite A300-1EC
  Microsoft Windows Vista Home Premium 6.0.6002 Service Pack 2
  BIOS Version 1.60
  Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz
  2048 MB RAM
  Disk memory hard 158,466,916,352 147.584 [GB]
  Disk space free 40,387,534,848 37.614 [GB]
  Video Mobile Intel (r) 965 Express Chipset Family = 7.14.10.1329 card
  Monitor resolution 1280 x 800
  Quality of transaction color true color (32)
  Realtek High Definition Audio = 6.0.1.5559
  Internet Explorer 8.0.6001.18882
  IDE FUJITSU MHZ2160BH G1

  Hi andre.bo,

  You may notice the same problem on an external monitor? I had a similar problem, but after I tried an external monitor, I noticed, it was related only to the internal display and not the graphics card.
  Check this box!

  In addition, you can get all the spare parts Toshiba from an authorized service provider and guys can fix this problem too! :)

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• Satellite A300 - "password" on the splash screen

  Hello, I have a problem with my Satellite A300-14 PSAJ0E-00W00PSK.

  * Screen with input "Enter password" appears every time when I turn it on can guess when I put wrong password 3 times, my laptop turns off. I had installed windows 7 with ubuntu for 2 years with no problems, but I can't boot any operating system present (even when I boot with the CD/DVD inserted with windows/ubuntu).

  * When can I get correct password? Or there is another solution to this problem? *

  Thank you for all the advice!

  I assume that your laptop is locked with BIOS password.
  BIOS password can be set only but I put t understand your situation.
  You have blocked your notebook with BIOS password or someone did it without your knowledge.
  Do you have an explanation for this situation.

  In any case, if the BIOS password is not known to you, you must contact the nearest service Toshiba and ask for help. They can remove for you.