white spots on the screen of the touchpad

Similar Questions

• White spots on the screen

  IAM having white spots on the screen.

  It therefore appears as a white light spot when the screen has a light background. On a screen darker it disappears completely. The spot is a few millimetres in size. My system is lenovo Z50-70.

  should I have to replace the screen?

  

  as long as you don't have more than three dead pixels, lenovo warranty covers the replacement if they do not change the conditions.

• Get rid of white spots on the old photo

  Hello

  What would be the best way to get rid of white spots on the attached picture?

  Thank you!

  

  Most of them can be fixed with the Checker task tool. The brush can create problems you may need to use the clone tool. If the task is small blur can also be used. Which is kind of how works the filter spot and scratch.

• Small white spots on the screen (no pixels dead) of RMB

  This week, when I opened my MacBook on the screen, I saw on the white spots screen 12 ". At first, I thought maybe would it be a beat on the screen but a quick wipe down and a thorough inspection of different angles confirmed that it was something else. I closed and turned back RMB. The small bright white spots were persistent, although only perceptible in the middle of a dark background, or when the Sun is reflected on the screen.

  Everyone has the same problem or knows what is the best solution for this problem? I don't have a case at Apple yet, because I am in doubt if Apple repair this under warranty on the other I need to get in touch with my insurance company.

  

  It reminds me of all the problems with the Retina on the MacBook Pro screens (you can search "Staingate" in Google). If the MacBook is under warranty, you must make a backup of your data and take it to an Apple Store or dealer, so that you can get your MacBook repaired.

• Black and white spots on the screen

  We have a model 1510 X projector.  Recently white and black spots appear on the projected screen.  They are now more and more people.

  What is a sign that the world must be replaced or another problem altogether.

  Hello, this is the same problem that I have on my other projectors, bad chip DLP from Texas instruments. The models are 1209 s and 1610HD, in Total, three with the question. They are not guaranteed bought towards the end of 2009 and dell will not extend the warranty nor will they provide a chip DLP replacement through TI through their 5 year warranty on the chip, if you contact TI they will send you to Dell, I am frustrated by this, because there is no resolution. The repair depot wants more than 600.00 to fix all of them. They have less than 500 hours on each and original lamps. I think that Dell needs to get by with the TI to cover this issue. I won't buy an another brand projector Dell, and I will make sure everyone I know will never buy one. I am fortunate opportunity staring the unit, but they will not even an exchange of pieces. These DLP chips make defective on any brand, it's just how the manufacturer will take care of the case. Samsung will replace free problem specific models and stands behind the TI warranty even if the units are out of warranty of manufacturing. Unless you have purchased an extended warranty through dell that you're SOL, unless there is a class action to solve the problem. DO NOT BUY DELL PROJECTORS! Jerry

• White spot on the screen

  Hi all

  I have a screen with the background image that has 7 to 8 buttons and labelfield added to them horizontally... To get a visible look, I added a few spaces between the items vertically so that they are also looking at spaced. All items are added to dynalically. Now the problem appears

  When I select / Create the event on the last button, white space appears I think the background moves horizontally to the top (30 pixels).

  Im not able to produce the solution on this scenario,

  Everyone comes through this?

  Try to create a new VertificalFieldManager that act as mainManager and add the Manager of VF ealier.

  This would work out. try to do this...

• White stain on the screen of the Satellite P20

  For some time I have a white spot at the bottom of my screen (they are not broken pixel) and they are to expand gradually.
  Please see the photos:

  http://CIDE.info/temp/photo-0067.jpg
  http://CIDE.info/temp/photo-0068.jpg

  I already changed the screen and the problem is still there. Anyone know this problem and a way to solve it. What is heat? I won't buy another screen to find myself in the same situation. Thank you

  Hello

  And what happens if you connect the external monitor? Y at - it the same problem?

• white dot on the camera LCD screen and photos?

  I have a older (5 years) camera digital kodak (my first) who suddenly shows a white spot on the LCD screen and the pictures during playback on the PC and printing final.

  I tried different Speicherkarten, blowing and clean the viewfinder and other openings in the camera with no result.

  This means - it's time for a new camera?

  Is this a common problem with digital cameras?

  
  

• Qosmio X 870-white spots on screen

  My Qosmio X 870 is 8 months old and have noticed white spots in the middle of the screen (more about half higher and mainly in the Center and go to the right of the screen).

  They are pretending be worse. When I go to a dark wallpaper that they stand as stained spots - more than anything else. I notice the most when I'm brighter games as tasks and it starts to get boring. I read on another page that it would be urgent foam top but not sure.

  Any ideas - would like to have an idea before I take it to be fixed.

  >... would have an idea until I get it fixed.
  I don't think it's so important. Is your laptop must be fixed so don t waste your time and contact as soon as possible the nearest Toshiba service provider.

  Laptop warranty valid so repair should be free.

  Good luck.

• White office on the left side bar. Help

  Hi, I have a problem with my office, it's a bar of white spot on the left side of my screen and its size is almost half of my office. In this white bar has many options lite my documents, information on archives and etc...

  Can someone tell me how to remove it without deleting the user profile?

  Hello Jolltex

  The Control Panel looks like the image here?

  If so scroll the number 15 here: left side

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Save the REG file to your hard drive. Double click it and answer Yes to the import prompt

• How to enable/disable the touchpad light

  Hi guys, I plug this portable one week ago and I still don't know the functions.

  on the touchpad, you know when to click twice when his assets, he goes off and the red light right? and when you restart there is a white light around the touchpad, since yesterday this thing of white light stopped working, but the red light that lights up every time that I don't use touch pad not working very well. I don't know what the problem is with him... is it possible to enable or disable the focus light?

  Press FN + space key to toggle the touchpad clear emphasis on your laptop. If you want to read more info on your portable computer, refer to the manuals on here

• Portege Z830 white spots - refusal of warranty

  I have a Portege Z830. For several months, I have 2 white spots on the screen. I went to the service company official for the Bulgaria - Stemo Ltd. - which examined the computer and told me that I did this white spots by myself.

  It's amazing! I leaned on the screen with a screwdriver trying to make a white spot imagined.

  Seriously, impossible user by all means to make this white spots. It is a malfunction of the display and the refusal of the Stemo to replace or repair, it is not understandable.

  I am adding photos of the screen with visible stains.

  Please help or just take in mind the reaction of the Stemo.

  URL: http://i.imgur.com/J4sOSjm.jpg
  URL: http://i.imgur.com/hYSIBaB.jpg

  Indeed, the screenshots show two points of light on the screen and it looks like display malfunction.

  Usually if the warranty is valid, hardware problems (if it's not your fault) should be fixed free of charge.

  So I hope that someone will get in touch with you to clarify this matter.

• White spot in left corner when Hibernation inexplicable

  Hello

  If I spend my yoga with Windows 8.1 in hibernation mode and restart it, I have on the desktop of windows (also on the execution of windows programs) a white spot on the top left corner. The place appears on the start screen and modern applications of Windows. If I have normal shutdown and restart the spot is also not visible. Does anyone know about this problem. I found similar problems via google about Windows 7 where it was a problem of AERO. But it does not work for Windows 8.1

  

  Take WinLister:
  http://www.NirSoft.NET/utils/winlister.html

  See what's inside a list corresponding to this area.
  Will probably take place (0,0) and size (4.4) or something.

• white spot

  How can I get a white spot on the sceneline view

  I need to know how I can show the forim views

  If for some reason you want to do only in the sceneline view, just select your empty stage, right click and select Remove just on stage.

• Remove a white spot in video

  Body CS4.  I shot a HD video and there was a small white spot on the black wall.  The camera does not move. This should be easy, I know, but I'm having a problem. I prefer to use the body to correct.  Masking and even a small black square of the video works but not transition also. In other words, in the previous shot lighter, you see my fix in the transition. Please tell us the easy way.  Thank you

  Maybe the effect of Clone of After Effects is to make higher quality work.