Whitelist for the installation of the grey list

Similar Questions

• Where are drivers of devices installed for the drives listed?

  If I install a graphics card, sound card, card network or other maps add-on, I need usually to also install a device driver. These device drivers are listed in the Panel-> uninstall a program. But when I use an external USB docking station to look at the contents of a SSD or HARD disk, the first time that the drive is mounted Windows automatically installs a driver for the reader. Where are the device drivers listed? There be a master list of installed device drivers. And are device drivers is read from the drive, Windows include a bucket of typical device drivers, or Windows will quickly find them via the Internet?

  Hello

  Thanks for posting your query in Microsoft Community.

  All installed device drivers are stored in the system32/drivers folder and here are the generic driver. Windows Installer drivers automatically when you connect a new device, some devices require that you install drivers manually. In these cases, the manufacturer of the device contains a disk of software and instructions on installing the driver before plugging. You can also visit the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows/install-USB-device#1TC=Windows-7

  Hope this information is helpful to you, post us all issues related to Windows, we will be happy to help you.

• Frequency minimum step length and duration list minimum for the frequency lists in the generator of signals from NI 5406

  Hello

  We need power RF amplifier with a function generator to create plasma in an ion source. The signal pulse duration must be 1ms long, repeated twice per second.

  Today, we work in the following way: we spend the RF with f0 (aprox 1,995 MHz) frequency. After 20, we send a trigger signal passing frequency f1 (aprox 2.005 MHz).  We keep this frequency for the rest of the pulse.  However, the plasma that we generate is not 'constant' or stable during the whole impulse. If we smoothly change the frequency during the pulse we could improve.

  We would like to do: use the frequency sweep: rather than use this frequency hopping, we would like to move smoothly f0 f1 (frequency scanning). Then F1 to f2.

  As we have a PXI for data analysis, we believe using the arbitrary function generator of NOR: 5406 of NEITHER allowing the frequency sweep. However, in the book loads, it is not very clear, and I have a few questions:

  -We can create a "list of frequencies. In the site OR below, it shows that the "minimum of Step' is 1.28us, which would be ok for us (I understand that the"minimum duration of Step"is the minimum time between 2 frequencies). However, the manual of the device "NI PXI/PCI-5402/5406 specifications" said the frequency list has a time step of 1 ms to 21s. What is the good?

  -It is also said that the "duration of minimum list" is 1 s. For us, need us a shorter list that 0.5 seconds (we need to repeat the same pulse twice per second.). Is it possible to do what we want?

  -At the end of the day, we would like to implement a control loop which modifies the list of frequencies in real-time.

  http://zone.NI.com/reference/en-XX/help/370524L-01/nisignal_generators_help/features_by_device_smc/

  Thanks for your help.
  Best regards
  Jose.

  Hi Jose,

  You're right about the inconsistencies of the documentation. The minimum step was of 1 ms, but was changed to 1.28 µs to driver version 2.6. The help document has been modified to reflect that, but the specifications were not. I'll make sure that attaches.

  The length of the minimum list is not listed in the book loads, and the latest version of the help the signal generators OR (driver version 2.9) lists the minimum list than the 1 step length. Aid has changed to the driver version 2.6.1 to clarify that the 1s meant 1 step. I've attached a screenshot of the help of the most recent.

  There is an example that is installed with the NOR-FGEN driver called "Fgen Sweep Generator.vi". I would recommend from this for your application.

  I hope that some of the inconsistencies in our documentation brightened. Please let us know if you have any other questions.

  Elizabeth K.

  Generators of signal produced technical support engineer

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html

• fill in the text field with the caption for the radio list

  Hi, I'm looking for an answer to this all morning.  I need to use the value of a list of radio to populate a text field.  I can get the selected numeric value OK with

  $.rawValue = form1. #subform [0]. . Table3.Row1 #SubForm [0]. . RawValue location [0]

  but I want to get the text associated with the value element.  This could be the legend of the selected option button, since it is the same thing.  I don't want to use an if statement because I have a lot of forms to create and that would change things a few times in each shape.  How can I get the value of the text of the column of the item below?

  

  Try the following with two modifications to your hierarchy.

  (1) currently, you do not have a name for Page1. Make sure that you assign a name for ease of use. ("Page1").

  (2) define a name for the subform that contains PeriodRadio. ("Subform1").

  $.rawValue = form1. Page1. Table3.row2. Subform1. PeriodRadio.selectedMember (). caption.value.text.value;

  Thank you

  Srini

• Options for the task list in the project (and a few other considerations on projects)

  I often look at many different projects and what I like in a first step is to get a complete view of the tasks: who are and what left to do.

  So, I choose the option "Active > all THE" ("assets > all"in French). But the problem is that this option is not saved in my profile: when I leave the project for another, is not the option.

  So it would be nice if either for my entire profile I could choose which option I prefer default is (and much better) If for every project, I could choose which option I prefer.

  Finally, the option would be to be able, as an administrator, to choose what option readers/members will be seen at the first reading, then they would be able to change it if they want.

  And of course, just for fun and like everyone here, objectives, secondary objectives, tasks and subtasks, projects, subprojects would be so nice to receive!
  And, finally, why not, let's dream... power move/copy a goal from one project to another :-)

  Thank you for your comments. We will certainly these requests to the product for the purpose of review team.

  Best,

  The Socialcast Team Services customer

• Value for the select list

  Hello
  
  
  Can someone please let me know how to value to select list (display Null value: Yes, the Null value to display:--select--) through the text field and button.) When I enter a value in the text field and click the button, and then select field must be filled with the respective value.
  
  I tried to make it through the writing of a query in the source and through dynamic action button, they are populating the value to select the list but we null is folded down, then we must click on the selection list to display the value, but I want the value that is returned to be visible visible null instead.
  
  
  Kind regards
  Shoaib

  Hello
  >
  Can someone please let me know how to value to select list (display Null value: Yes, the Null value to display:--select--) through the text field and button.) When I enter a value in the text field and click the button, and then select field must be filled with the respective value.
  >
  a. What is the source of the LoV? Static? Dynamics?
  b. the value that you set using point and button is the value display or the return value of the LoV? It should be the return value.
  >
  I tried to make it through the writing of a query in the source and through dynamic action button, they are populating the value to select the list but we null is folded down, then we must click on the selection list to display the value, but I want the value that is returned to be visible visible null instead.
  >

  As you mention DA, you are on 4.x. But it is better to ask clearly the Apex version.
  See you soon,.

  PS: What you have specified in the Retrun Null value?

  Published by: Dominique on July 20, 2012 13:31

• Cannot set the default value for the selection list

  I created a list of selection, the 'value list', and it's like this:

  STATIC:Morning;M,Noon;N,Evening;E

  I want that he selects 'Morning' by default. But when the page is displayed, it sorts actually three items in alphabetical order, so "night" is still the default.
  
  Someone knows how to change that? Thank you!

  Specify am ' in the default value of the edit page of the item field.

  CITY

• Incomplete information for the programs listed in the control panel

  In the Control Panel, some programs have no comprehensive information.  For example, some are missing the date of installation, some lack the amount of data, some are missing the Publisher.  Many programs have the name only.  When I highlite a line with incomplete information, I not give me the option to uninstall/change ("uninstall/change" is not at the top of the page, click the action to perform).

  Hi Richerich,

  Only programs that were written for Windows will appear in programs and features. Check the documentation that came with your program, or go to the manufacturer's Web site. Most of the programs moved into the C:\Program Files folder.

  Troubleshoot installing or uninstalling programs

  See also the below article from Microsoft kb for more information.
  Incorrectly, Add/Remove Programs tool displays installed programs
  In the above article, it mentions that it is for Windows XP, but it also applies to Windows vista.

• Method of painting for the field list

  While developing a small application using a custom list field, I am facing the problem of the paint method, called in a loop. being new BB development such as Java, looking for help here.

  When I tried the debugging scenario, I am not able to understand much, with the exception of the fact that the list field calls the method painself again and again in a loop. Has anyone else faced this problem.

  Is there a way I can debug to find what is causing the paint to get method called unnecessarily?

  You place a breakpoint in the method object and inspect the call stack during the break.

  Most likely, this problem is caused by something in the method object that actually precipitates another call to object. This will put your program in a recursive loop so that the breath of the battery.

  If you post the code object, maybe we can identify the problem.

• Align decimal numbers for the track list

  Hello, you showed me how do it long ago and have forgotten since. I have a Tracklisting of a paragraph as follows:

  1.

  2.

  3.

  4.

  5.

  6.

  7.

  8.

  9.

  10.

  11.

  I followed the tabs tut in the CC tut who says line right to the top of the box of the tab with the text block, click align decimal numbers and click where you want to go, I get the orange arrow, but nothing aligns. The UTU uses a table for example, is the only way it will work?

  Kind regards.

  If you do just a numbered list, you only need to use tabs to align on the decimal point. Simply insert a fixed space called a figure space.

  Make sure your numbers are of equal width. Since the character or control panel menu > OpenType, make sure Tabular Lining is set for numbers:

  

  Then in front of 1, 2, etc. Insert a space figure (Type > insert a space > Figure space). White space is the width of any character. You can use several spaces figure if you were with a very large number.

  

• Some tips for the Windows Live Mail 2011 0x8E5048 fixing error code?

  Live Mail not keep open, indicating that my calendar is corrupted.  Above the error code

  Hello EugenePressman,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Can't send or receive messages for the Hotmail (archer12006) account.

  After using the direct mail... I did as he... I get this message, I have tried everything it suggested and still does not work...

  Can't send or receive messages for the Hotmail (archer12006) account.

  Server error: 4102
  Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0x8DE00001

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Can't send or receive messages for the Windows Live Hotmail account. Windows Live Mail error ID: 0 x 80048849

  Can't send or receive messages for the Windows Live Hotmail account.

  Server error: 0 x 80048849
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048849

  Hello Ian Rousell,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Select the default list

  Apex 4.2

  Theme 21

  I have a process that sets the value of 2 elements of application (F150_SYSTEM and F150_CONFIG)

  I have a page that contains 2 selection lists.

  I want that selection lists to be filled by default with the values of the elements of the application

  I tried to fill in the box by default with F150_SYSTEM and using PL/SQL Expression

  and the body of the PL/SQL function, but when I look at the value of session it just says F150_SYSTEM.

  What is the correct way to do it?

  Gus

  Hello Gus,

  Gus C wrote:

  Apex 4.2

  Theme 21

  I have a process that sets the value of 2 application parts (F150_SYSTEM & F150_CONFIG)

  I have a page that contains 2 selection lists.

  I want that selection lists to be filled by default with the values of the elements of the application

  I tried to fill in the box by default with F150_SYSTEM and using PL/SQL Expression

  and the body of the PL/SQL function, but when I look at the value of session it just says F150_SYSTEM.

  What is the correct way to do it?

  Gus

  Please set the default value for the selection list area with:

  :F150_SYSTEM
  

  and the value Type defaults to: PL/SQL Expression.

  Do the same for the list of selection of F150_CONFIG item

  I hope this helps!

  Kind regards

  Kiran