Who ask us to Mozilla to bring SPACE and SEPARATOR buttons?

Similar Questions

• Master password, who you are and who asked him?

  I wonder today about master password in my Firefox 15.0 - I allow it for a long time.
  When I visit a site referenced with stored user name and password for the site questioned the master password, but there is no information on the site by name who ask for it in the dialog box. Everything works perfectly with an open site, but if I have several tabs open? I have not now who ask for it. Can I set my Firefox browser to do more to talk about?

  Unfortunately, you can't master password dialog box view more Firefox configuration information. I couldn't find any extension to it. However, there is an extension that ask you your master password to start the browser, that's not embarrassing during your browsing session.

  https://addons.Mozilla.org/en-us/Firefox/addon/master-password

  I hope this helps.

• performance issues. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.

  I went to system security - find and resolve a problem-check performance problems.  I checked something who asked what I wanted at the start.  So I can't access anything whatsoever.  Any suggestions?  THX.

  Hello

  • You receive an error message?
  • What exactly are you can't access?
  • What version of Windows are you using?
   
  You can refer to the following steps:
  Step has.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• Is it possible to move the \windows\installer folder? The reason why I ask is because it takes a lot of space and I want to move it to another disk with more space.

  The \windows\installer folder takes a lot of space and I want to move it to another drive if possible. Ashwin

  No, I don't think. Just about anything in the Windows directory cannot be moved. You will need to find another way to clear disk space. Try to compress your drive hard (if you don't know how, ask).

• What to do when you send a document for a signature and the person following the instructions to sign, but the document is not save or send the document to the person who asked for signature

  Problems with eSign service... not recording not not signing so it can refer to the person who asked.

  Hi clarisse.

  If you send the document by using services of E-Sign, once the document is signed, the document is automatically sent to the sender as a signatory.

  Let me know if you have any other questions.

  Kind regards

  -Usman

• When I try to install flash player on my mac, I get to the Panel who asked for my name and my password, and it will not take my password.  tried to change to a new password and the same result

  When I try to install flash player on my Mac, I get to the Panel who asked for my name and my password, but it won't take my password.  Tried to change the password, but same result.  Suggestions?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

• How can I increase my recovery drive (d). It is fixed to 15 GB and I have tons of free space and want to bring to about 40-50 GB

  After only 1 or 2 backups, it overflows. I want to open more space and I see a few large files, but I don't want to delete them without knowing what they are.

  NT ATLEE/SYSTEM IS one of them to 12.5 GB. It doesn't seem likely that it would be to delete. I have no junk left to remover or.

  I recently got burping on IE. I recorded everything and can reinstall the whole system, drivers, updates, etc.

  Before that, I would like to know how to enlarge my recovery in order to have several bakups to restore later if necessary, without having to go through everything.

  Sometimes I save a backup elsewhere for easier restoration also.

  Using Win 7, IE 7 again, on a not to mention dell POS.

  Really, I hesitate to use the most recent EI, until the BS is that they are ALWAYS overcome. Maybe it's time to IE8? Laughing out loud

  In any case, all I really want is to expand my recovery disk. Tons of free space on hard drive. 844 franco departure 916 GB.

  I seem to be close, but can't get on top. I have taught myself since military-electronic learning computers and

  1 semester electronic engineering in College 20 years ago. Just bought 1, turned on and started fishing around end 90. All I really need to understand is interface software and programming stuff.

  This seems to be a basic enough scheduling feature to be able to do it myself.

  Thanks in advance, Greg

  If you are sure that you have the means to re - install Windows, and you did the Dell recovery discs at some point in time, you can extend the old recovery partition using a 3rd partition manager left...

  EASEUS... http://www.partition-tool.com/

  The original version is free.

  I know what you mean re get hard drives of duff replaced.

  One of my clients gave me a laptop to watch because he was working like a dog. Even if the built-in diagnostic tests showed clearly that the hard drive had gone as West, the company offers some more.

  I have little time for OEMs or department stores that pass the junk on members of the public.

  Support is disgustingly bad when it comes to replace defective hardware and not better for software either. They're just...

• Options, advanced, "there's no ' disk space and network"?

  I searched "how to compact the received messages on mozilla" the answer say ' options, advanced, and then click on 'network and disk space' it is NONE 'disk space and network"not anywhere on advanced settings, 'general' to all that. This is not the first time an answer to my question produces the same results, not on my computer.

  Are you running the latest thunderbird? Are these messages imap or pop?

• All the Web sites I visit every day are blocked by a virus that seems to be Mozilla (but isn't) and wants personal information in order to unlock parent control. My viru

  I tried to go to Web sites that I visit every day and they are all blocked by a virus that seems to be Mozilla (but isn't) and watch the logo of mozilla and says my site has been blocked by the parent control of Mozilla and you must sign up for this. He asks that all the personal information you give NEVER online so I knew it was a virus. I write this in safe mode. My Vipre will not pick up this virus and Malware bites either. I have deleated Mozilla and reinstalled but it did not work.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
  Someone needs to fix this problem yesterday.

• Desktop spaces and hotspots still missing

  Model name: iMac identifier model iMAC c16.2: retina 4 k lTE 21.5 2015, 3.1 GHz, intel core i5, 8 GB, 2 TB HD, El Capitan 10.11.2 fusion Mem.  Office spaces and hot spots remaining after that computer sat for about 30 minutes.  A reboot will bring these functions, but then they stop after a short period. I tried the disk utility, Warrior of disc that works sometimes.

  Please describe more precisely what is happening - I do not understand what you mean by "Office space" (Mission control do you mean?) and the 'hot spots' (active corners?). What does not work exactly? Can post you some screenshots?

• Time Machine don't prune the old El Capitan backups and works out of space and "backup fails.

  With the help of El Capitan 10.11.1, I noticed a change in behavior with the handling of the time Machine of large files, specifically the files of virtual disk VMWare Fusion (about 50 large concerts).  After a few weeks of use of fusion VM virtual machine, Time Machine gives an error where it ran out of space and "backup failed."

  I had the same problem occur on a second iMac that I own.

  I reformatted my external drive for Time Machine and started fresh, but after a few weeks, I got the same error again.  It seems that Time Machine is not the size or remove older backups of VMware virtual disk to provide a space for the new.

  Previous versions of Mac OS X and Time Machine had no problem with the backup of large files such as these.

  Has anyone else noticed "backup failed" message with Time Machine on El Capitan?  I know that I can exclude the disk virtual VMware backup, but that defeats the entire purpose of Time Machine backups.  Any suggestions?

  Time Machine automatically deletes older snapshots to make room for the new. If your backup history is shorter than expected, it may be because you want to save one or more large files frequently.

  Software virtualization VMware, Parallels or VirtualBox creates a large virtual disk container that is constantly evolving. It will not be saved at all while the virtual machine running, and at other times it must be saved each Time Machine performance. Who fills up quickly any backup destination.

  You must exclude files from virtual drive of your Time Machine backups. To do this, click the Options button in the Time Machine preferences window. You can also do this to virtualization, application settings. Back up the files on the virtual disk within the comments system, using a native backup application.

  A compromise solution is to create a 'snapshot' of the virtual machine in the virtualization software (not a Time Machine snapshot.) This will give you a single large file that never changes and only has to be saved once. All future changes will be stored in a file that is much smaller initially, but will grow over time. You must always exclude this backup TM file. If you need to restore the computer virtual of Time Machine, you will have a working configuration, which will be easy for you to restore the rest of the data in the system of comments.

  See also this page of Parallels support.

• WinSxS swallow all my server storage space and fill C:Drives causing unstable Windows

  Hey there, I got a small cut of data center where we have virtualized 10.  Which most is Server 2008 standard with 4 x x64Bit version.

  I thought about creating a 75GB C partition would be more than enough space.  After about 9 months of use of torque with a 64 bit OS and Exchange 2010, I was up to 5 GB space on my C drive.  Fortunately, I had a load of spare to park my Exchange .edb files to remedy the problem of the lack of storage SAN.

  What MS is going to deal with this problem.  I'm lucky, I can just use extra storage space and make a difference.  What of those who pay for hosted solutions / storage.  This eventually cost them much more they may have planned to even if they copy actually that much data on the server.

  Surely MS will come out as its eems to be a cleaning tool or a patch to stop this issue more and more out of control.  Nobody seems to have a decent solution for this.  Woe to anyone brave enough to just go and delete files to free up space.

  Any ideas or advice greatly appreciated.

  Looking forward to hear from you.

  Glyn.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Note: your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on area issues, to do that please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Remove the empty spaces and LF between lines in xml

  Is there a way to remove the empty spaces and LF between XML nodes?

  Let's say I

  CLOB l_clob;

  ..

  l_clob: ='

  < root >

  < name > ioerio < / name >

  < 10 > < / age >

  < / root >

  ';

  I need to get a XML in a single line without spaces and withoud LF...

  Example:

  SQL > ed
  A written file afiedt.buf

  1 declare
  2 l_clob clob.
  3. start
  4 l_clob: ='
  5
  6 ioerio
  7    10
  8
  9  ';
  10 l_clob:=replace(l_clob,chr(10)); -Remove line breaks
  11 l_clob: = regexp_replace (l_clob, ' > +)<','><>
  12 dbms_output.put_line (l_clob);
  13 * end;
  SQL > /.
  ioerio 10

  Must say, this is a strange requirement.  Most people ask how to do the reverse.

• Hi all, I need to understand why my VMs will always grow so big they eventually run out of disk space, and then I can't resize them...

  Hi all, I need to understand why my VMs will always grow so large they finally running out of disk space, and then I can't resize them... see the screenshots below:

  

  So all my virtual machines are that looks like it's finally the 5 GB goes down to zero, cannot update things like Dropbox and all sorts of other things start to break. I then, go here and try to expand, but I get this error on machines to young readers:

  

  I think I need at least as much GBs on the system, as is the virtual machine? Done my MBA and smaller machines, is not possible. But when I move the virtual machine to a bigger machine like my iMac, with a big disc of TB, I can do the resizing. Is it the way it is supposed to work? Perhaps, I do not have this right...

  thx for all the advice!

  Yep, that's the way it is supposed to work.  The close, move it to the iMac, expand drive, then arrest him and bring him back.  Make sure you choose "move" not "copy" when migrating to avoid triggering the activation of windows.

  Regarding what is eating space inside the virtual machine, you will have to consider for the guest OS for more information (which are not a matter of merger).

  To free up space on the host, with closing VM, go to settings, click on the circle of little tiny refreshment next to the space bar, then if she said cleaning recommended, go into general and make a clean virtual machine.