who asked that I not repeatedly sent messages window even if there is no email to send

This window will appear each time before I close windows live mail.  But there is nothing in the air currents.  Where else pending mail can be stored.

Check the Outbox.  He might be there.  Make sure that you have configured to display unread messages.

Steve

Tags: Windows

Similar Questions

  • I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

    I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

    But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

    (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

    Hello

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • In Firefox 29,0 and above, click on the menu button

      click Help

      then select restart with disabled modules.

    • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

    If Firefox is not running, you can start Firefox in Mode safe mode as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • Windows Live Mail 2012 is not saving sent Messages - 8 victory

    Recently my laptop was stolen and had to get a new.

    Fortunately, I had everything backed up with mypcbackup.com, so not too lost.  However, I have major issues with Win Live Mail.

    1. saved messages are not saving to sent mail.  The boxes are checked.  I checked that "show all messages" is the parameter.  I tried to change the folder to mail to a new charge storage and empty one.  Nothing works.  Someone said that the parameters of time and the region can effect.  Mine are set for time and my correct location even though when I bought the laptop, it has been the standard we TZ rather than my local Malaysia.  This cause a problem?

    It is to save the gmail and hotmail sends properly.  Just having problems with my computer and business correspondence which are not mainstream, but have been well until the new laptop to work and win 8.

    2 I had restored my backup of emails in mail storage folder, but none of them are picked up by Win Live Mail.  This is very important because it's the last 4 years of work e-mails.

    Thanks in advance to anyone who can help solve these issues.

    Hi Mattkerr,

    I suggest you to uncheck the option to save the messages in the sent items folder. Restart Windows Live Mail, and then check the new option, clickapply , and then click OK.

    Also try to rebuild the Windows Live Mail folder and check if this solves the problem.

    Step 1: Rename the Windows Mail folder and create a new folder

    a. exit Windows Live Mail.

    b. find the folder of Windows Live Mail .

    It is usually located in:

    C:\Users\user\AppData\Local\Microsoft\

    c. right click on the Windows Live Mail folder and then click Rename.

    d. Add old at the end of the name of the folder so that the folder is now named Windows Live Mail.old.

    Step 2: Create a new Windows Live Mail folder and copy the contents of the previous folder.

    a. start Windows Live Mail so that it can automatically create the new Windows Live Mail folder, and then quit Windows Live Mail.

    b. find the new Windows Live Mail folder to confirm that his creation.

    It is usually located in:

    C:\Users\user\AppData\Local\Microsoft\

    Note If the new Windows Live Mail folder is compressed, you must unzip this file. To decompress, right click on the Windows Live Mail folder, and then select extract.

    c. open the Windows Mailold live folder.

    d. open the Local folder and copy theaccount {xxxxxxxxxxxxx} .oeaccount . Notice thatxxxxxxxxxxxxx represents numbers or letters.

    e. Paste the file in the Local folder in the new Windows Mail folder (that was created in step 1 of this procedure).

    f. If the following folders are present in the Windows Live Mail.old folder, copy each folder and paste it into the new Windows Mail folder.

    o stationery

    Microsoft o community

    g. close all folders.

    Step 3: Import messages in Windows Mail

    a. start Windows Mail.

    b. import the messages into the previous Windows Mail folder to the new folder. To import the messages, follow these steps.

    i. click file, point to importand then click Message.

    II. click Windows Live Mail in Select a programand then click Next.

    III. click Browse, select the Windows Live Mail.oldlocation and then click Next.

    IV. click all folders inSelect the folderand then click Next.

    v. click Complete, and then the messages will be imported in file imported.

    c. place the messages that have been imported into any folder to the folder appropriate under the Local folder. For example, move messages in the Inbox under the imported folder folder to the folder Inbox under Local folder.

    d. check if blocked messages are deleted. If this is not the case, try to send or delete messages.

    If the problem still persists, then I suggest you to post the same question in the Windows Live Mail forum for more help on this issue.

    http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=threads

    Please do not hesitate to visit our Web site for any help with the Windows operating system.

  • Mail is not delete sent messages as described in the preferences

    (Grumpy warning: Point - happy warriors FAQ should show fair relevant questions, or I'll make you.)

    It is a problem of mail which was me angry for a long time. All my mailboxes are configured automatically delete sent mail after a month. Still my sent mailbox is loaded with mail, on average, age 6 to 7 months. Here are my settings:

    OS X 10.11.3. All accounts are IMAP. All email accounts, send and receive are correctly. There are no icons for error next to their names. I have not restarted that 16 days ago, but this problem is much older than that. He is a new user account on a drive wiped with the new OS X installation since last spring.

    I usually can't stop Mail, but I did it today, he then revived. Changed settings, before returning to a month. No change. I can't wrap my head around it. I've lived with it because ultimately they are deleted, but I would it work as expected. Any suggestions?

    The issue is resolved as of today.

    What has not worked:

    Reboot was not the solution because I did several times last year the half but I haven't restarted in 20 days. Quiting Mail and re-run it wasn't the fix as I rebooted there is 20 days, and several times last year and half, so there is no reason why this action suddenly fixed things.

    What does not work:

    I think that to change the parameters of deletion, then again once again, fixed some problem happened 8 months ago when mail stopped removing.

  • How can I get thunderbird to open on the homepage so that I can select sent messages because it only allows me to Inbox?

    It is used to display the home page when starting, so I could select Inbox or sent messages, etc. But now it starts only on Inbox with no way to get to the home page. How can I restore homepage with various options?

    Move your mouse to the left edge of the window
    See for this to turn into a double-headed arrow
    When it changes, click, hold and drag to the right to discover the files pane

    The Thunderbird window needs to be maximized to work

  • BlackBerry smartphones can not edit sent messaged

    I am forwarding a message. before emailing, I'm editing it but can't do anything. How to delete, for example, certain words or the sender of the message?

    Maybe there are any application able to help me on this?

    Yes, you need thirdparty app named 'ForwardWithEdit '.

  • Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

    When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

    Hello

    1. have you made changes on the computer recently?

     
    Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
     
    Step 1.
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to start in safe mode of Windows 7.
    e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
    f. do whatever tasks you need and when you are done, reboot to return to normal mode.
     
    Step 2.
    If it works fine in safe mode try performing a clean boot in order to find the cause root.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
     
    I hope this helps.
  • Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

    Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

    Hi FRANKGRIMES_945,

    What is the model of your computer?

    (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

    (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    Hope the helps of information.
    Please post back and we do know.

  • iTunes will not install. error message: Windows error 126

    Original title: iTunes won't install... I'm not the only one apparently...

    Windows dear community,

    iTunes will not install.
    I used to have it on my laptop Sony to 64-bit, but not more.  Messages displayed are: @AVFoundationCF.dll is missing "or"cudt36.dll is missing"or"Error 7 (Windows error 126)"."iTunes cannot start"etc." I tried to uninstall or repair iTunes, but nothing works.
    I am reluctant to watch the registry etc. that I'm not qualified. No simple solution that works please? Thank you.
    Geoff

    Hello

    Thanks for posting in the Microsoft community!

    I'm sorry to hear that you have the iTunes installation issue. If I understand correctly you get a Windows error 126 error code when you try to install the iTunes. Please correct me if I'm wrong.

    The problem is specific to iTunes?

    Run the fixit and try to install iTunes.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/program_install_and_uninstall

    System File Checker

    System File Checker will try to help you in fixing all corrupted files and folders from the computer.

    Please click on the link below:

    http://support.Microsoft.com/kb/929833

    Error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found.

    http://support.Microsoft.com/kb/959077#appliesTo

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry) how to back up and restore the registry in Windows.

    I suggest to remove every trace of iTunes and other apple and utilities to the computer software and try the re-installation.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    You can also check this link.

    https://discussions.Apple.com/thread/2735255?start=0&TSTART=0

    If the problem persists, then you can contact Apple support.

    http://support.Apple.com

  • Sites of bookmark in the file that does not appear in the window

    I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

    Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

    The seal shows what is happening.

    What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

    I want to change the four folders listed in the drop-down list.

    What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

    It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.

  • Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

    I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

    I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

    I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

    On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

    I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

    Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

  • When sending an Email containing pictures, I get the Message "one or more of the images could not be sent" in Windows Live Mail.

    When sending an Email containing pictures, I get the Message "one or more of the images could not be transmitted. When I send this message to my address, I see the little red X in place of the image. How can I fix it?

    original title: Live Mail

    Hi donabell,.

    Thanks for posting your question in the Microsoft answers Site Feedback forum. Your question it will be better answered by the experts in the Windows Live Solution Center. Please repost your question here.

  • Many services that are not started in the Windows XP computer.

    Original title: WIN XP has deteriorated
    Seems a great number of services do not start and are lost.  This causes a lot of things I don't like:
    No Clipboard
    No audio
    No spool printer
    Impossible to move files
    Cannot use the system restore
    etc.

    My CPU get - online, most of the work programmes, but these limitations are really more than annoying.  I spent hours to read and do all kinds of things, but alas the notng seems to work.  I created an image of the CD from my WIN7 CPU.  No change.  * Sigh *.

    I am sad.

    If sfc/scannow you help, I'll send you or your charitable organization preferred $100 Americans.  So far, I'm zero dollar.

    What you mean:

    No Clipboard

    Do you mean that you are unable to start the ClipBook Service?

    If you try to get an error 1068, that's because the ClipBook Service has a dependency (see the Dependencies tab) and who would be the network DDE Service and who does not start because it also has a dependency of the Network DDE DSDM Service.  So they all have to work for the ClipBook Service starts.

    I would say that normally keep all that junk disabled unless you think you have a good reason for them to run at all.

    What you - services are lost?  They lack the Services Applet?

    Which are absent?

    What a Win 7 has to do with this XP system (hopefully nothing).

    I would like to run some malicious software scans everything first, then we can see about getting your Services back together.

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

    Then just choose a Service - like your print spooler and try to launch and operate.

    Describe what happens when you try to start it (next to her does not work).  If you ever get an error 1068 you try to start a Service, you must open the properties/dependency tab and see what needs to be executed first and start them (such as the remote procedure call (RPC) Service).  The RPC Service should be running all the time in any case - is - it?  I f it does not work, run it, and set the Startup Type to automatic.

    If your Service of print media is totally absent from the Service Applet (it happens sometimes), I am sure, that a Microsoft Support engineer can say to it add.

    If they can't, I'll do it.

  • "Tuner is not available" error message Windows Media Center with HD HomeRun Prime

    Running the tuner HD HomeRun Prime with Time-Warner tuning adapter.  Scan is not the tuner.  No problem with Device Manager.  For all drivers are current.  I have that once had access.  Then and only then, I had to access via HD HomeRun Prime and NOT of WMC.  No matter what I do, no tuners are found.  Adequate signal IS present.


    3. the similar issue was also addressed in the two threads below.
     
     
    If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step,Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
    1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
    2. restart the computer to Resync to Media Center driver:
    a. Click Start.
    b. click on the arrow in the toolbar and then click on restart.
    c. wait that Windows and all startup items load before you open Windows Media Center.
    3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
    Microsoft support: Windows 7 Hardware Compatibility List (in English)
    4. change the Windows Media Center Receiver Service specific to a Local System account account name:
    a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
    b. double-click on Services .
    c.
    scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
    d. right-click on Windows Media Center Receiver Service and then click Properties.
    e.
    click the Connection tab , and then select the Local System account .
    f. click apply and then click OK in the message Services.
    g. restart the computer.
    h. click OK again and restart the computer.
  • Create a hyperlink that does not open a new window if a window containing the url is already open?

    Is there a way to create a hyperlink to a url that ' climbs to ' window of the URL if it is already open in the browser?  Therefore, a new window does not open and the existing window containing the hyperlink would not change either.

    If the target url is not already open, then yes the link could be open in a new window or in an existing window.

    Does anyone know if there is a command/code for this?

    Hello

    from the point I understood, that I see, is the relative to the appearance as described here (I used "function in my DW help):

    http://help.Adobe.com/en_US/Dreamweaver/CS/using/WScbb6b82af5544594822510a94ae8d65-7d2da.h tml

    Quote:

    In the target menu in the property inspector, select the frame or window in which the document is bound to appear:

    • _blank opens the document in a new browser window, leaving the current window untouched.

    • _parent opens the document linked in the frameset parent of the frame that the link appears, replace the set of frames together.

    • _self opens the link in the current frame, replacing the content in this context.

    • _top opens the document in the current browser window, replacing all frames.

      Frame names also appear in this menu. Select an image named to open the document linked in this framework.

    Hans G.

Maybe you are looking for