Who holds the keys for encryption AES mentioned in the table under "security and features iCloud?

Similar Questions

• Is there a shortcut key for "Flatten Image"?  I just upgraded to CC and again it is not a shortcut for IT... Ugh.  Someone knows something to flatten the Image via the keyboard?

  Is there a shortcut key for "Flatten Image"?  I just upgraded to CC and again it is not a shortcut for IT... Ugh.  Someone knows something to flatten the Image via the keyboard?

  I've been using Ctrl + Alt + Shift + F for years, don't know if it's a default shortcut, or if I assigned.

  You can create your own sets of shortcuts - Edition > keyboard shortcuts.

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• problems with the table of contents and index

  I do the localization for the Japan, so I'm all nice and good in Japanese (themes, table of contents and index), however, after compilation, only the TOC and India are in a font that does not support Japanese characters.
  Does anyone have any ideas how to solve this problem?
  Thank you

  Thank you Pete, it's part of the solution.
  In fact, what I discovered on a German forum for RoboHelp, is to set the machine to the locale for the country, and the location is made. I installed the language support pack before my problem and so I was able I was translating into topics. The problem appeared when I tried my first compilation. The subjects were still in Japanese, that I translated, but the table of contents and the index and were the only ones who wrote in a totally unknown style (not Japanese English and not another language, I know).
  Now that I've changed the location of my system, it works.
  So, I think that this should be a first improvement for RoboHelp, right? They boast that they support 35 languages, however the support isn't quite... finish, huh?
  Furthermore, the error message continues to come even after all these changes, but I don't like too much about this, I get what I need.
  Thanks again Pete for the solution and the quick response.

• How to insert image from mysql into the table using php and create the checkbox in the table?

  How can I insert image from mysql into the table using php and create the checkbox for each data as a vote? Here is my code...

  WELCOME

  connect_error) {die ("connection failed:".)} $conn-> connect_error); } $sql = "SELECT no, Calon, ID, of course, the Image OF THE candidates." $result = $conn-> Query; If ($resultat-> num_rows > 0) {echo ' '; export data of each line while ($row = $result-> fetch_assoc()) {"echo"}}

  NO	Candidate	INFO	Vote
  " . $row ["no"]. "		-" . $row ["Calon"]. " -" . $row ['ID']. " -" . $row ['class']. " "; } ECHO ' ' ;} else {echo '0 results' ;} $conn-> close();?} > hope someone can help me because I am a newbie in this program... need to finish this project... Thank you.

  If you have saved the file name in the database, it's pretty simple.

  echo '';
  

  Is the same for the box:

  echo '';
  

  If you have saved the image file in the database, it is much more complicated. I recommend you store only the file name in the database.

• difference in size of the Table in oracle and timesten

  Hi all
  
  
  I have a large table with 2 million records,
  
  I see no big difference in the size of the table in oracle and Timesten
  In oracle table size to 4 GB, but in Timesten is arround 15 GB (using ttSize for 2 M lines)
  
  Could you please tell me what could be the cause of this difference?
  Is the size of the table in Timesten is always more than oracle?
  What are the factors and parameters affecting the size of Perm?

  It is typical for the storage needs for a DataSet to be significantly larger in TimesTen in Oracle. This is due to the Organization of the very different internal storage in TT from Oracle; Oracle is optimized to save space while TT is optimized for performance.

  Ways to minimize these costs are:

  1. make sure you use TimesTen 11.2.1. This has some characteristics compare compact (minor) and earlier versions.

  2 assess the use of numeric types; native types TimesTen (TT_TINYINT, TT_SMALLINT, TT_INTEGER and TT_BIGINT) use less space than MANY and longer by the effective calculation as well.

  3. check use of data of variable length (VARCHAR2, VARBINARY, NVARCHAR) and the trade-offs between online and online storage (see documentation for the compromise between these options stirage TT).

  Even when you use the foregoing, you will still see a storage important "inflation" for TT from Oracle.

  Chris

• How to draw the line under STROKE and fill of an object in illustrator cc? Ideas: D...

  How to draw the line under STROKE and fill of an object in illustrator cc? Any ideas ...

  Aleksandar,

  If I (put) understand it, you will need to divide the object. You can:

  (1) select the object and Ctrl / Cmd + C + F, and then remove the filling of the copy and the blow of the original;

  Draw 2) and drag the new piece down between Division 1 objects) in the layers palette, or select 1 copy) and Ctrl / Cmd + C + F + X + F or similar.

• Please I need product key for my photoshop cs6, I work in trial mode and now it has expired

  Please I need product key for my photoshop cs6

  Fear the idea is that you test the software and if you make a purchase. Photoshop is not freeware. If someone were to give you a product key that would be software piracy. It would also be a very stupid thing to do because if you put CS6 on more than one machine their copy may stop working. If you don't handle Photoshop take a glance to GIMP running on Linux, OSX and Windows

  https://www.GIMP.org/

  Terri

• Trying to mix tracks at a track that holds the information of right and left

  I use hearing CS6.

  I'm trying to mix files containing multiple tracks (up to 10 tracks) with separate left and right signals.

  I want to mix down a track and retain the information in right and left.

  I am only able to mix and get the left right combined signal. After auto update for Windows I can't keep the left right info but merges in mono 2.

  You have these 10 tracks opened in a single session or stereo? If, for some reason, default session of the hearing has been changed in Mono while might produce results that you hear. So be sure that you start a new session as a stereo and use it.

• I can't open the pane of security and privacy preferences after encryption?

  I followed the installation program from the file vault and when finished I went to the security and privacy preferences pane, I received a message saying that it could not load

  Forget it; It just loaded

• How can I remove icons for programs unibstalled of the control panel "programs and features"?

  Icons FRO uninstalled programs still appear in "Programs and features" of the control panel. How can I remove them?

  Hello

  
  Icon/program which you are referring?
  
  To work on the issue, refer to these methods.
  
  Method 1:
  
  Check out the following link to start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Check if the problem persists in safe mode. Display the results.
   
  Restart the computer and boot to the desktop normally.
  
  Method 2:
  
  Run the fixit from following link to confirm if the program or the application has been uninstalled correctly.
  
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  See also:
  Troubleshoot installing or uninstalling programs
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  
  Check if it helps.

• Use the table 2D input and output dll

  Hi, I have a problem with table 2D used with library funtion call to get the table of DLL.

  uint16_t is defined as unsigned short, who is unsigned 16-bit in labwindows.

  In the following two codes origFrame.height is 1024, 1280 origFrame.width.

  QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t frame2D[1024][1280]) {}
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  Copy each pixel of the 2D array
  
  for (int i = 0; i)
  
  for (int j = 0; j)
  
  frame2D [i] [j] = * p ++;
  
  }
  
  }
  
  }

  2D array is passed to the DLL in the form table 1 d, I also tried table 1 d below but to get the same numerical results.

  {QCam_Err DLLEXPORT FrameGrab(void* handle, uint16_t *frame1D)
  
  uint16_t * p;
  
  p = (uint16_t *) origFrame.pBuffer;
  
  for (int i = 0; i)<(origFrame.height*origFrame.width);>
  
  frame1D [i] = * p ++;
  
  }
  
  }

  Both of these methods gives me the same numeric result with regard to the numbers in the output array.

  Something interesting is that the output array has the right size, but all the numbers in the table are about ~ 40, while my expected in all values table is 60.  I know, because I use this to get values of a pixel in a camera and I know that the values of the pixels.  I also used the same code in LabwindowsCVI as a normal program built as exe.  Everything works fine and I get my expected values.  So apparently miss me something here, when I changed the settings to make dll.

  What I've done wrong?  Thank you very much for your help!

  Best,

  Charles

  
  

• Create triggers in the table, sequence, insert and update with "model"?

  It must be of rtfm, trial and error thing but you wanted to ask, is it possible to have models or similar automation for the following scenario:

  1.), I add the table to the logic model

  2.) Using glossary I transform a relational model that was recovered / synchronized with the data dictionary

  3.) then I have the new table to add

  -but

  I would then have auto-DDL of to be synchronized to database:

  -create sequence for the id column

  -create table

  -create indexes for the id column pk

  -Create triggers for insert and update

  -l' idea is to have db_created_dt and db_modified_dt defined in the table, so that each table has them to the fields of record etc.

  -activate the triggers

  Each of them following the same naming convention.

  Similarity with approx. generator Apex workshop utils sql create table of the copy paste "excel" that creates 'id' - column + sequence and insert the trigger.

  rgrds Paavo

  Hi Paavo,

  most of the steps can be made in one or other way

  -create sequence for the id column

  -create table

  -create indexes for the id column pk

  If you want to start in the logic model and you don't want to have the ID column in the logic model and select 'Create the surrogate key' checkbox in the dialog entity - you will get an identity column in the relational model and the version of database and settings in ' preferences > Data Modeler > model > physics > Oracle "you can set the sequence generation and the trigger for taking in load.

  fields of record defined in the table, so that each table has them

  You can add the same set of columns in all tables with the transformation script 'model of Table... ».

  You can also look here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

  to see how to grant your DDL generation using the transformation script. DM comes with example to generate separate tables of logging and triggers. You can create your build script of triggers that support logging in these common columns.

  Philippe

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish

• DB file sequential reads on the table scan complete and LRU (new)

  I would like to add a question on the subject

  scan of full table and LRU

  According to MOS doc ument 1457693.1

  «.. signs diluvium readings of the caching blocks can be divided into a number of small multiblock and self-contained bed. »

  The question is if sequential readings of db file submitted by a FULL SCAN operation will be cached on LRU or MRU list?

  I'm afraid the flushes of heat/floods the buffer cache with a lot of FULL SCAN db file sequential reads.

  For which direct path series reason readings will be inapplicable, so using this new feature of 11g is out of scope for this question.

  Thank you for your interest,

  Rainer Stenzel

  There are a few different patterns of behavior depends on the size of the table (relative to the size of the buffer cache), but the key question is probably "readings will increment the counter of touch" - because if they are not the blocks will fall the LRU list fairly quickly, if they do then the blocks could (after a few tablescans) eventually be promoted in half hot from the cache.

  I did some quick tests (that requires a little care in the Installer) which suggest the number touch was not incremented has therefore not had any effect on the question of if the block would get preferential treatment when they have reached the end of the LRU.

  I'm a little puzzled by your expression: "cached on LRU or MRU list" - it's not two different lists; but people talk about "the end of the MRU of the LRU list.

  Concerning

  Jonathan Lewis