Who to back up data from USB airport

Similar Questions

• How to back up data from the iphone water damage over 6 sec.

  I dropped my iphone more than 6 s in sea water, and it seems capable of lighting (which shows a black screen). I'm trying to back up data. When I connect the iphone with the computer, the following prompt box appears on itunes. Now I'm confused. Could someone answer my questions please?

  1. This means that my iphone is still able to turn it on?

  2. that means that only the screen is broken and the motherboard still work?

  3. How can I save the data without entering the password by using the touch screen?

  Thank you very much.

  

  This means you should STOP PUTTING ELECTRICITY through your phone untreated, ack!

  Your phone has a display problem, but yes - it lights up.
  Perhaps your problem is just a bad screen (which is unfortunately a part of $250 to a 6 sec more now).  Apple cannot help you with other water damage that offers to sell you an iPhone refurbished for $349.

  But most likely, your problem is also on the logic board - usually fixable.

  There is no way around the need for touch operation and the image on the phone to access the data.

  In order to access the data on the phone, you need your advice to hold the power and start, (it does) you need of your screen image lines, and you need to contact work.  Ideally, you would also have your backlight lines works as well.

  Most of the phones in this condition have a pretty good shot in data recovery in this situation - touch, and line of the image problems are usually solvable if your phone can be detected by iTunes.   It is certainly not DIY work, this is a troubleshooting open-ended the microsoldering and level of card issues.

  Your only option for recovering data would be to find a good microsolderer experienced in data recovery.

  I recommend to replace any phone which has seen water, corrosion on the Board always weakens solder everywhere, so the phone is likely to have a shorter duration of life more problematic.

  Note: It may be possible to cancel your option for the swap of OOW $349 at Apple if you continue recovering data at the level of Council - although I've never seen this happen.

• How to transfer data from USB key

  How to transfer data from the reader flash player (C), when you open send it to it does not have this option

  Drag & drop.

• HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

  We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

  Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely

• Devote any space to a USB ready Boost permanently would make it unnecessary to keep the data from USB?

  Can the boost loan process be rolled back so that I can still use my USB key to store data.

  Hello

  You can disable ReadyBoost for a storage device.

  I suggest you to refer to the links and check if it helps.

  ReadyBoost turn on or off for a storage device 

  ReadyBoost

  Let us know the results. We will be happy to help you.

• Copy the data from USB key for comments

  Dear all

  How can I put a USB and copy some data and programs from other PC to a guest VMS on ESX 3.5?

  You can also buy USB hubs attached ethernet. With these, install you an agent on the virtual machine and she moved the USB stick as if it was connected directly to the virtual machine.

  See:

  AnywhereUSB

  http://www.Digi.com/

  Belkin network USB hub

  http://gadgets.fosfor.se/Belkin-network-USB-hub

  http://reviews.CNET.com/networking-and-Wi-Fi/Belkin-network-USB-hub/4505-3243_7-32467513.html

• A satellite will not start - how to back up data from the HARD drive?

  Hello
  My laptop won't turn. How can I take backup of internal hard drive?

  Please read my writing as soon as POSSIBLE

  If you n t have access to your saved data remove the laptop HARD drive, connect it to the other PC as external device and you should have access to all stored data if the HARD drive is not defective.

  What you need is USB 2.0 IDE 2.5 HD enclosure disk hard drive / external case/Box.

• I can't download data from USB to PC

  I have a video camera and you can not download files to PC. The message is unable to find files. The camera will download on my laptop, but who doesn't have a DVD burner.

  Hello Dany Shoff,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with the download of the flash player to computer data.

  I need to ask you some questions to help you better.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the video camera?

  3. What is the exact error that you receive when you download files?

  Reply with answers to help you best.

• To access data from different pages

  Hello

  I want to know who, how to access data from an html page to another html page using Javascript or HTML5?

  Thank you and best regards,

  Tejas

  After the installation of new WebWorksSDk, my problem is resolved automatically...

• read data from a SQL database

  Hi all

  who can I load data from a database, based on a specific query and data in a string or an integer in cascades please give example

  Thank you

  for example first element of data

  // dd
  data[0].dd
  data[0].mm
  etc...
  

  If you put the data to GroupDataModel for example. Then you can access it with ListItemComponent like this:

  ListItemData.dd
  ListItemData.mm
  etc...
  

• Not able to copy the data on USB in WIndows 7 even with administrative rights

  I use Windows 7 64 bit and have administrator rights, I can copy data from USB but system is not allowing me to copy the data on USB. This has happened with me also, but since I change my laptop, this problem has been resolved.

  It happened suddenly, earlier, I managed to copy the data to USB abd take backup of my system, but now it is not possible. Please notify.
  You may need to take possession of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• I need to transfer my data from my iphone 6 down to a previous 5s (owned and backed up on my MBPro)

  How can I transfer my data from the iPhone 6 down to my iPhone 5s?  Thank you.  Al

  Back up and sync your iPhone to iTunes 6. Set the backup to encrypt. Then connect your iPhone via USB cable 5s and choose to restore the backup of the iPhone 6.

  Your iPhone 5s must have the same version, or more updated iOS installed on it that the iPhone backup 6. If this isn't the case, set up your iPhone 5s as a new device, update 9.3.2 iOS software and files then it from the backup of the iPhone 6.

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• Delay COM port, but it can read back data from MAX

  What short RX and RX directly, COM port can data from feedback on the test panel MAX, but still error display "time out What is the reason? Thank you.

  Hi Colin,

  When you read back the data, there is a parameter called "Bytes read" you need key, the default value is 1024, in this case, it will keep waiting for 1024 bytes until the timeout occur.

  I found a good article talk to this topic and you can change the bytes to be read in the test environment LabVIEW or MAX.

  http://digital.NI.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0

  Let me know once try you it, thank you.

  Kind regards

  KwokHow

  AE OR Singapore