WHS 2011 OEM with HP Proliant Microserver license will not activate

I'm building a new Server OEM WHS 2011, using HP Proliant Microserver.   I first installed one a box, entered the serial number, I get an invalid serial number message, even though I know that I entered the number is correct.

Any suggestions are greatly appreciated.

Hello Miked53,

You can find Windows Home Server forums at the following location. I suggest you re-post your question here:

Tags: Windows

Similar Questions

  • Windows 7 will not activate with the OEM key, after the failure of HARD drive.

    Hello

    I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

    The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

    I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

    Any help would be greatly appreciated!

    Thank you

    Brian o '

    Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - QCPVQ - KHRB8-RMV82
    Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
    Windows product ID: 00359-OEM-8992687-00095
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.130104 - 1431
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
    Installation ID: 004806170012218410865063155553272544088463952332351022
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: RMV82
    License status: initial grace period
    Time remaining: 43080 minute (s) on (29 day (s))
    Remaining Windows rearm count: 3
    Trust time: 31/03/2013-02:23:35

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC DELL WN09
    FACP DELL WN09
    HPET DELL WN09
    MCFG DELL WN09
    WN09 DELL SLIC
    OSFR DELL WN09
    SSDT PmRef CpuPm

    you use an OEM SLP key that only works with the manufacturers recovery media.

    change the product key to that on computers of COA
    Click Start, type slui3, press ENTER.

    Additional information:

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

    Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed. The system works fine with Sata 600 pro SSD for windows and WD 4 TB Black seagate for storage. When the Intell 900 PCIe SSD drive is installed the system hangs at the LSI Mini OROM screen remains white. is there a way to put the LSI controller to jump the PCIe slots for boot devices?

    2 X Xeon 2695, 64 GB Ram, graphics Nvidia Quadro K5000, 2 X Intel 10 GB Ethernet card.

    Thanks for the reply. In fact I've disabled the LSI controller and connected to the integrated SATA controller and the Z820 starts and works perfectly with the PCIe SSD installed.

    Thank you.

  • I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days.

    Original title: I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

    I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike

    Hi Mike,

    Thanks for posting your question in the Microsoft Community.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. What is the error message that is accurate or complete?
    2. have you made any recent hardware or exchange of software on your computer before the show?

    I suggest you to go through the following articles and check if that helps.

    Error message when you start Windows Vista: "your activation period has expired".
    http://support.Microsoft.com/kb/925616

    Resolve activation problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

    How to activate Windows Vista
    http://support.Microsoft.com/kb/940315

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    For more information:

    Validation failed? These scenarios may help to explain why.
    http://www.Microsoft.com/genuine/downloads/FailureScenarios.aspx?displaylang=en

    If anything in my post is not clear or if you have other questions, do not hesitate to let us know. It is our pleasure to be of service.

  • E-mails are with incredimail, to get ok. will not go. Then the Outbox disappears altogether

    E-mails are with incredimail, to get ok. will not go. Outbox then completely disappears. I need lots of help. Please

    Hello

    Thank you for your message. It seems that there is a problem with your IncrediMail.

    Help about the software, you will need to contact help here http://www.incredimail.com/english/help/support.aspx

    Feel free to use the forum for any other issue of Windows, you may have.

  • Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10.

    Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10. the same code that is delivered on paper when I bought adobe

    Creative cloud does not use a serial number and creative cloud subscribers for not having any serial number associated with their programs.  Creative cloud subscribers use their adobe ID to activate their programs.

    Download and install the desktop creative cloud application (after signing with your adobe - the same as that used to pay for your creative cloud subscription ID), https://creative.adobe.com/products/creative-cloud

    Open the office application (a shortcut will be on your desktop) > click applications, and then select the programs you want to install.

    the desktop application gives you access to the cs6, cc, cc 2014 and cc 2015 apps.  and probably more in the future.

    If you already have the cc desktop application and you need to update your adobe id, log out and then back to your client application using the adobe id to pay for your subscription in cc: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • cS2 - LICENSE will NOT be RENEWED

    I have Adobe CS2. The license will not be renewed.  I need immediate access to this program.  If anyone can help?

    Hi there, this is not a support forum, so I'll move this post to the Creative Suite forum where they can help you.

  • I have CS3 on my current computer and he's dying. I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

    I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

    Anna,

    It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems.  You can check this link to check systems, it is designed to work:

    System requirements | CS3 product points.

    Guinot

  • 13 elements will not work with the new camera, it will not be updated raw 8.7.1

    13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

    Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

  • Problems with HP Proliant MicroServer N36L...

    Please forgive me for asking this here, but I'm looking everywhere in the forum, and others that the post on all the drivers I could not find any what true troubleshooting forum, so I hope you'll forgive me if this is in the wrong place...

    I have a HP Proliant MicroServer N36L.  I upgraded the RAM 8 GB, and I have 4 X 2 to SATA drives installed, the RAID1 for two volumes of 2 TB of space.  I installed WIndows 7 Pro 64 bit.

    There is no software installed, except for the following: SugarSync customer, Air Video Server, Client TappIn and Panda Cloud Antivirus.  I keep all my photos, videos and documents on this server to facilitate access of any of my iOS devices while I'm abroad.  The video streaming server, by the way, works brilliantly, since everything is streaming is the Apple MP4 format that isn't too hard on resources...

    However, when I'm on the server and doing some of the most basic things with nothing else running (for example, copy and paste files, simply browse the contents of different folders, etc.), the server is incredibly slow.  It will just stop and after a LONG pause, resume.  Very frustrating.

    My first question - do I have installed Server 2008 R2 Standard?  I have a license for that as well.  I have no need for all of the security reporting, control, etc. otherwise than to simply share my photos and other whatnot.  So I thought that the installation of WIndows 7 Pro 64-bit would be a simpler choice.  Was it a mistake?  The installation was smooth and without a hitch, and the operating system had no trouble to install the proper drivers, etc. for the material.

    What is the best solution that will still allow these customers to run?  Should I see these "flaws"gel"with as much RAM?  It's the low power processor?

    Please forgive me for asking all these questions, but I really appreciate any insight or input I can get on this.

    Have a good night,

    Mike

    Update, I answered my own question. After a long phone call with the HP Server support, it is clear that the architecture of the N36L is pointing to Server 2008 R2. Under their recommendation, I removed from Windows 7, and server load, and now this little spitfire is fast. Very effective and works very well. I could not be more please. Don't waste your time to install any other OS MS here other than Server 2008 R2, you will not lose your time. Thank you.

  • Focus problems with Rebel T3i. It will not be in manual or auto focus point. It's not about camera lens

    My camera will not focus. Not only the autofocus. I can't he focus even if I put manual focus.

    The image is still blurry.

    First I thought it was the lens I had but I tried with several, and the problem is the same.

    Any ideas what could be the problem?

    Thank you

    Have you checked the viewfinder diopter?  , It will be not clear even on the manual focus, and it happens with all your lenses makes me think that it is possible that the dial tiny bit right there on the eyepiece was implemented accidental market. The dial control what you see in the viewfinder, not something to do with the focus lens. The diopter is adjustable so that those who need glasses can see things through the viewfinder.  If everything still seems blurry even when the camera thinks he's focused it is generally just that little diopter got hit accidentally.

    IFIT is not this, then perhaps your screen focus got shifted.

  • Adobe Digital Editions will not activate with too many activation error

    Adobe Digital Editions will not be activated with too many activation error.  Technical support refused to help.  What can I do?

    To reset the client contact activation support cat https://helpx.adobe.com/contact.html?step=ADE_adobe-id-signing-in_stillNeedHelp and ask for the reset of the adobe ID.

  • I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

    I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

    #1, try the FTP mode passive switching power in the definition of your remote server site.

    #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

    Nancy O.

  • I bought a used laptop with a version of Win7 OEM and license will not authenticate.

    Hi, I believe that the seller must have used a version of Win7 OEM upgrade but wiped the original OS from the laptop.  I've been going round in circles with the supplier for weeks now nothing does.  They want to send back me the phone so that they can "Watch".

    It is the diagnostic report.

    Rgds Frank

    Diagnostic report (1.9.0027.0):

    -----------------------------------------

    Validation of Windows data-->

    Validation code: 50

    Code of Validation caching online: 0x0

    Windows product key: *-* - 74XYM - BH4JX-XM76F

    The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =

    Windows product ID: 00359-112-0000007-85441

    Windows product ID type: 5

    Windows license type: retail

    The Windows OS version: 6.1.7601.2.00010300.1.0.003

    ID: {4D929D1D-FEDD-4074-9509-85B98BBE74E3} (1)

    Admin: Yes

    TestCab: 0x0

    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

    Signed by: n/a, hr = 0 x 80070002

    Product name: Windows 7 Home Premium

    Architecture: 0 x 00000009

    Build lab: 7601.win7sp1_gdr.150113 - 1808

    TTS error:

    Validation of diagnosis:

    Resolution state: n/a

    Given Vista WgaER-->

    ThreatID (s): n/a, hr = 0 x 80070002

    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->

    Cached result: n/a, hr = 0 x 80070002

    File: No.

    Version: N/a, hr = 0 x 80070002

    WgaTray.exe signed by: n/a, hr = 0 x 80070002

    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->

    Cached result: n/a, hr = 0 x 80070002

    Version: N/a, hr = 0 x 80070002

    OGAExec.exe signed by: n/a, hr = 0 x 80070002

    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->

    Office status: 109 n/a

    OGA Version: N/a, 0 x 80070002

    Signed by: n/a, hr = 0 x 80070002

    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->

    Proxy settings: N/A

    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

    Default browser: C:\Program may Explorer\iexplore.exe

    Download signed ActiveX controls: fast

    Download unsigned ActiveX controls: disabled

    Run ActiveX controls and plug-ins: allowed

    Initialize and script ActiveX controls not marked as safe: disabled

    Allow the Internet Explorer Webbrowser control scripts: disabled

    Active scripting: allowed

    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->

    Office details: {4D929D1D-FEDD-4074-9509-85B98BBE74E3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-XM76F00359-112-0000007-854415S-1-5-21-3946564470-1629378854-4067432594LENOVO7459LK9LENOVO6DET30WW (1.07)20080910000000.000000 + 000FEB40E00018400F818090409GMT Standard Time(GMT+00:00)03LENOVOTP-6 d 109

    Content Spsys.log: 0 x 80070002

    License data-->

    The software licensing service version: 6.1.7601.17946

    Name: Windows 7 HomePremium edition

    Description: operating system Windows - Windows (r) 7, retail channel

    Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad

    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

    Extended PID: 00359-00170-112-000000-00-1033-7601.0000-3322014

    Installation ID: 018510745823930873493132754653484441985681032355900965

    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

    Partial product key: XM76F

    License status: Notification

    Reason for the notification: 0xC004F009 (grace period expired).

    Remaining Windows rearm count: 2

    Time to trust: 13/02/2015-17:19:36

    Windows Activation Technologies-->

    HrOffline: 0x00000000

    HrOnline: 0xC004C532

    Beyond: 0 x 0000000000000000

    Event timestamp: 1:30:2015 11:48

    ActiveX: Registered, Version: 7.1.7600.16395

    The admin service: recorded, Version: 7.1.7600.16395

    Output beyond bitmask:

    --> HWID data

    Current Hash HWID: NAAAAAAABAABAAIAAAACAAAAAgABAAEAJJQU3OQsENN6f8Sl8mNkP8D20DrdlExe + EVGyg ==

    Activation 1.0 data OEM-->

    N/A

    Activation 2.0 data OEM-->

    BIOS valid for OA 2.0: Yes

    Windows marker version: 0x0

    OEMID and OEMTableID consistent: Yes

    BIOS information:

    ACPI Table name OEMID value OEMTableID value

    APIC LENOVO TP - 6 D

    FACP LENOVO TP - 6 D

    HPET LENOVO TP - 6 D

    BOOT LENOVO TP - 6 D

    MCFG LENOVO TP - 6 D

    SSDT LENOVO TP - 6 D

    CO-SUBMISSION LENOVO TP - 6 D

    SLIC LENOVO TP - 6 D

    ASF!            LENOVO TP - 6 D

    SSDT LENOVO TP - 6 D

    TCPA

    SSDT LENOVO TP - 6 D

    SSDT LENOVO TP - 6 D

    SSDT LENOVO TP - 6 D

    Your report that you run a license to retail with a default product key that cannot be used to activate Windows 7.

    Windows license type: retail

    License status: Notification

    Reason for the notification: 0xC004F009 (grace period expired).

    Remaining Windows rearm count: 2

    Time to trust: 13/02/2015-17:19:36

    If there is a COA sticker attached to the computer, try to use that to activate:

    Try the following:

    Click Start, right click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link 'change product key '.

    Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

    Otherwise, follow the instructions to return the machine and reactivated it.

  • If I replace the currecnt OEM with a new drive HDD, will I need a new copy of Windows 7?

    I have an old ladies broadcast p5500 toshiba laptop here, the hard drive makes loud noises tick and patient assumes that its dead as its not reading or loading so if I get her another HARD disk it will have to get another copy of win7 home prem or y at - it another way to put win7 because I can't go to the recovery partition to recharge but im able to read the number of Win 7, she got with the laptop back on Steve

    I have an old ladies broadcast p5500 toshiba laptop here, the hard drive makes loud noises tick and patient assumes that its dead as its not reading or loading so if I get her another HARD disk it will have to get another copy of win7 home prem or y at - it another way to put win7 because I can't go to the recovery partition to recharge but im able to read the number of Win 7, she got with the laptop back on Steve

    Some laptop manufacturers propose sending a disc image of the dvd system for your particular operating system for a certain fee.

Maybe you are looking for