Why all my programs and files open with Microsoft word?
All my programs and files open with Microsoft Word and I need to know how to change that?
I've seen that happen before when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After Word selection using the Select a program from a list of programs installedand check always use the selected program to open this type of file, the Word document referenced by the shortcut of origin opens in Word, as it should.
The problem is that now all shortcuts (for example. LNK files) on the desktop or in the browser will want to be opened by Word. This is known as a file association. . The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.
This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.
I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on by SkyDrive own here.
Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.
- If this proposal of solution solves your problem, please go back and mark as answer for others to consider.
Tags: Windows
Similar Questions
-
All my programs (especially .exe) open with Acrobat reader.
All my programs (especially .exe) open with Acrobat reader.
Need support
Hi Fayet,
Thanks for posting your question on the Microsoft community forums.
I understand that whenever you open an Acrobat application .exe file opens. Let us know if this incorrect. It would help if you could let us know about any changes made to the computer before the show.
There is an article in the knowledge base that provides methods to solve this problem. Check out the link and follow the methods.
When you open a file on a Windows-based computer, the file may start another program
http://support.Microsoft.com/kb/2656106
Important registry This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
Let us know if you need more information.
-
Original title: how to change a nco file extension
Many of my files created with Microsoft Word mysteriously transformed into NCO files that I can't open. Help please!
Hello
1 is specific to only the question word files?
2. what happens when you try to open these files?
Method 1: Check out the link after, and then set the default program to open the word as Microsoft Office Word files and see if that helps:
Reference:
Change the programs that Windows uses by default:
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Method 2: Restore the computer to a date when it was working fine.
Reference:
System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
You can also post the question to Microsoft Office word Forums.
Here is the link: http://answers.microsoft.com/en-us/office/forum/word
-
Somewhere along the line while trying to open a PDF, Microsoft Word has been selected. Now, whenever I try to open a pdf file it takes me to Microsoft Word where, of course, it will not open. How can I cancel the directive to Microsoft Word and apply Adobe Reader instead?
You can check out the action for Portable Document Format (PDF) in tools > Options > Applications
-
one day, I was roaming through my computer the next thing that I can't open any of my files, they seem to be transformed into .lnk files, so I went online trying to this point and I can not come up with anything else that this program that I need to download to fix figure , but when I download it I can't open it. does anyone know a different way, this can be corrected? pls help can't open any of my files, documents, jpg, mp3, the only thing im able to do is to go online.
Go to http://www.dougknox.com/xp/file_assoc.htm
Read the instructions at the top of the page, then download and use the following syntax:
EXE file Association Fix
LNK (shortcut) file Association Fix -
Can't open anything
Hi Karpaholix
I would like to ask you a few questions to help focus in the right direction:
Are there other specific details that you can provide that will help us understand and solve your problem? Since when you receive this error message? Have you made changes to your system?
We can try a few steps and try to solve this problem.
A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.
Open default programs by clicking the Start button, click default programs.
In the default programs, you can:
· Set your default programs. This option allows to choose the programs that Windows uses by default. If you want to use your Media Player to open all media files, use this option.
· If a program does not appear in the list, you can make the default program using set Associations.
· Open default programs by clicking the Start button, click default programs.
· Click associate a file type or Protocol with a program.
· Click on the file type or protocol that you want the program to act as the default.
· Click on the program of change.
· Click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
· Click OK.
You can also check out this link for more details to make a default program:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
Let us know if it worked!
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I did this game is not open and all the tutned of program shortcuts to the icon of adobe reader and most can now be opened? Help
Restore the .exe Windows Vista file association, after badly with another application
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html
For Windows Vista file association problems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to set file Associations:
http://articles.TechRepublic.com.com/5100-10878_11-6172036.html
How do I... Change file extension associations in Windows Vista?
See you soon.
Mick Murphy - Microsoft partner
-
After obtaining a false claim of £100 police (well I think) froze my phone and now it opens in wordpad - someone has an idea how to solve this problem? I'm not computer to find all the solutions online a bit confused. Thanks in advance!
Hello
1. What is the brand and model of the computer?
2. what security software is installed on the computer?
Method 1.
I suggest you to refer to this article.
Change which programs Windows uses by default: http://windows.microsoft.com/is-IS/windows7/Change-which-programs-Windows-uses-by-default
Method 2.
Start the computer in safe mode with network and perform a virus scan.
Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode
You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 3.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program: http://support.Microsoft.com/kb/950505
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
I hope this helps.
-
can I reinstall windows 8 pro and keep all my programs and files on my hard drive
Reinstall windows 8 pro without losing files and folders already on the hard drive, is it possible
Yes, you can make a room upgrade.
You can download it from there and use your product key to upgrade:
http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only
Select the option:
Settings of Windows, personal files and Apps
-
How to transfer all programs and files to another hard drive
I want to transfer all my programs and files on another hard drive. How I could do. ? my windows has been preloaded.
Hello
programs need to be reinstalled from the original media
You cannot transfer installed programs
to transfer files, read this:
Move your folders and files of the user to a different partition
http://www.vista4beginners.com/move-user-files-folders-to-another-partition
_______________________________________________
and I think you should dissipate what you try to do
Another question in the repair of Vista, that you want to move that installed full operating system, not only programs and the files on another hard drive
and read this on how to back up your data and also make a complete pc backup
make backups on an external hard drive or DVD
see if this information helps you
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
-
The file does not open in Microsoft Word
When I try to open an online text document, it will not open in Microsoft Word. How can I change this?
Go to start / Default programs / associate a file or Protocol with a program and do scroll up until you get in .txt. It's probably on the notebook. Click on change and change for Microsoft Word (you may need to search for winword.exe somewhere in Program Files) and save your work and exit. In the future, .txt files will be opened with Microsoft Word.
If this happens with the .doc, .docx, .rtf, or other files that MS Word can open, and then do the same with these types of files that you did with .txt above.
I hope this helps.
Good luck! Lorien - MCSA/MCSE/network + / A +.
-
Hi my problem is that I have that I've changed an exe file open with program steam
the thing that starts when you press a program or what ever. like when I press on the internet Explorer it opens steam. Hi my problem is that I have that I've changed an exe file open with program to steam and now all my things on windows 7 opens steam and I donth know how back open by default program of you I can start the program normally. And I tried to go to control panel and change the default programs, but it won't change anything. Please help me
Hello
Try a system restore: http://support.microsoft.com/kb/936212
Good luck $
-
I installed 5.6.2 Pages but all my old documents will open with ' 08 v.3.03 How can I remove the Pages ' 08 and update all the old documents
5 pages is located in your Applications folder.
Pages ' 08 is located in your Applications/iWork ' 08 folder.
If you open your old documents Pages ' 08 with 5 Pages it will convert and if not damage, remove a large number of useful features.
You will probably regret upgrading to 5 Pages which Apple has made extremely inconsistent and keeps changing its file format.
Peter
-
I want to add a new application to the list right click on file-> open with
and also reorder the list so my search app is first / top of the list.
I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.
Basically, I'm looking for a configurable way configure open with, something more to send to Windows.
Thank you very much for all the advice offered.
The operating system, not you, not control that open with the menu command.
-
whenever I click on a program, that it does not open and the 'open with' screen appears
whenever I click on a program, that it does not open and the 'open with' screen appears
Hello
Use above message for intense and thorough check for malware.
To restore the ability to run any .exe programs.
1 make a Restore Point so that you can come back if necessary back although probably not required.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
Click on it and FUSION - REBOOTDO NOT COPY THE LINES
-----------------------------------------------------------------Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\. [EXE]
@= "exefile".
"Content Type"="application/x-msdownload".[HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
@= "{098f2470-bae0-11cd-b579-08002b30bfeb}".[HKEY_CLASSES_ROOT\exefile]
@= "Application".
"EditFlags" = hex: 38, 07, 00, 00
"FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\DefaultIcon]
@="%1"[HKEY_CLASSES_ROOT\exefile\shell]
[HKEY_CLASSES_ROOT\exefile\shell\open]
"EditFlags" = hex: 00, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shell\runas]
[HKEY_CLASSES_ROOT\exefile\shell\runas\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shellex]
[HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
@= "{86C86720-42A0-1069-A2E8-08002B30309D}".[- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]
--------------------------------------------------------------
DO NOT COPY THE LINESIf necessary:
Check the fix of exe here
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.htmlAlso check this one if it applies
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlI hope this helps.
Maybe you are looking for
-
I get an error when you try to display my records using the workstation. When I click on the drive makes it appear the following message. Windows cannot find 'RECYCLER\S-5-4-27-100023129-100025622-100024648-4436.com '. Make sure you typed the name co
-
Hi all Recently, I had some problems with my hpe-140sc. Its been crashing all the time, hang up the freezing and so on... Very unstable, at the same time, then a few hours of smooth functioning. I just thought it was a kind og software problem and I'
-
downgrade acer aspire 571 - v3 for windows 7
Hello I am trying to downgrade an acer aspire v3 - 571 of windows 7 to windows 8? Anyone know how I can change the boot order to boot from a dvd or usb hd rather than the hard drive? See you soon
-
What is the best way to replace an Appasure Agent with hardware new and new computer name?
What is the best way to replace an Appasure Agent with hardware new and new computer name?
-
I have a Dell XP 8700. I use the stream video card HDMI port on my TV. There is a second HDMI port (from the motherboard?). What is the purpose of this port? Thank you