Why am I always get error unspecified of C\Program Files(x86) \New folder \Engine\5.2.0.13\uistb.exe everytime I try syart upward from my Norton 360 anti virus

whenever I try to use my Norton, 360, it does not work, I can't urn that the firewall on it isn't work fpr the reason why I said in my question. How can I solve this problem of an unspecified erro amd to get my Norton 360 tp work?

Contact the Norton Support for assistance.

Tags: Windows

Similar Questions

  • I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express.

    cannot send error 0x800CCC0B group

    I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express (not sure which version) under XP, I used to be able to send a group with 500 more emails in it, I tried to narrow the group to 200, but it makes no difference can anyone help?
    Check out this link. Apparently there is a max of 100 recipients simultaneously and they also will disable your account temporarily if you try many times.
     
     

  • How to make a box for error off my screen. Wrong e-mail address does not pass & I always get error days later

    How to make a box for error off my screen.  Wrong e-mail address does not pass & I always get error days later

    Hello

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

    • You use the Windows 8 Mail or any other email client?
    • When was the last time it was working fine?

    If you encounter problems with Windows Mail app, try the following steps.

    Step 1:

    Please go to the link below, download the file and run it.

    Run applications troubleshooting

    Download and run the troubleshooter modern UI App.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Step 2:

    I suggest to go through the link and follow the given procedure. Here is the link for your reference.
    Solving problems with a soft

    Hope this information was useful.

  • Help: can not download even if CC & always get error 201...

    I tried all these steps on an iMac 27 "(fin 2013, OS X 10.10.5, 3,5 Ghz/32 G) and a member of the CC photography since Dec2013:"

    -Tried to update CC different times of the day/night (always get error 201)

    -Uninstalled CC and restarted.

    -Ran CC Cleaner (deleted PS CC and Lightroom too *) and restarted

    -Tried to install CC with firewall off

    -Tried to install CC in Safari and Chrome

    -Tried with disconnected laptop

    -Connected back out signed to Adobe

    -Run the iMac permissions

    -Disk checked (end)

    -Physically removed all Adobe of the library too

    -Reset the PRAM and reset the network

    -Reinstalled Adobe flashplayer and AdobeReader

    -Tried to install the version of assessment-CreativeCloud (received error 201)

    -Tried to install an older Aug2015 CreativeCloudInstaller (error 204)

    I am running out of ideas and can not find stuff more troubleshooting.

    * Note: I had to remove LR because CC has broken several months (during the previous update) and I could not update my application of LR.  As a result, the old version of LR could not read the LR library of my Macbook Air (a newer version).

    Anyone have any ideas?

    Help is really appreciated that I just returned from a trip photo with 650G new images.

    You can install anything up to (but not including) the latest versions of 2016 using direct downloads.

    You can use the appropriate link below for your installation files

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I can't convert pdf to word... always get error... Please help

    I can't convert pdf to word... always get error... Please help

    Hi jamiec78954247,

    Try to use the https://cloud.acrobat.com/exportpdf online service

    Let me know how it goes.

    Kind regards
    Nicos

  • key to active but MAC always get error

    My customer has purchased 10 licenses of Adobe Web Premium CS5. So far, we just used and 6 of 10 licenses (turn on the Windows computer) successfully activated. They tried to key active but MAC always get error like the image below: deleted by the moderator >

    Please help me solve this problem.

    Thank you very much.

    Hello

    Please do not post images with serial numbers since it is an open forum.

    Reference: error: "serial number is not valid for this product". Adobe Creative Suite

    Kind regards

    Sheena

  • Always get errors trying to download something on the creative cloud.

    I tried to download the trial version for Adobe first pro and im always getting error while trying to download it, I also tried to download the software directly and it works but when its time to install it, it also gives me an error, wich btw is not specified, I treid to redownload everything and it does not work. Im not a pro so if anyone of you guys already have this problem please help me. If you need more detail just ask and ill he provides for you.

    Thanks in advance.

    BTW im on windows 7

    Hey SimonG962805

    Please see this KB document for help errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5.

    Kind regards

    Nicos

  • Unspecified error C:\Program Files (x86)\Google\Chrome\Application\chrome.exe in Google Chrome.

    Original title: problem Google Chrome Jumplist.

    I have a problem on the points of the Jumplist to the Google Chrome browser. I did a system restore and Google Chrome was broken. When I click on the 'new window' and the 'new incognito window' in the Jumplist, this message is:

    C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

    Unspecified error

    So I tried to copy the user APPDATA chrome.exe and then the error message does not get out, but he has not responded to the command.

    Is it possible to repair chrome or do a clean install?

    Screenshot:

    Hello John Yoon 98,

    I suggest that you post in the Forums of Google since the specific error is with Google chrome.
    Click here for a link to the Google Forums.

    They should be better able to help with this issue.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: RunDLLEntry It just started and I have not installed anything new.

    I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.

    Hello Lscherr,

    Thank you for your message.  To clarify, you are able to print out your design program?  You can try to perform a clean boot and printing of your design program.  A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality.  If you are able to print, the problem may be caused by another application of part 3.  Click HERE for instructions to boot.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • When you try to use the texture of the paper adobe pro, I get: error a reference to a file / folder: 104

    When you try to use the texture of the paper adobe pro with CC2015, I get: error a reference to a file / folder: 104

    left Adobe Creative Cloud for General Photoshop Discussion

  • Try to uninstall coupon printer application. I get this message "c:\Program files (x86)\couponXplorer_5z\bar\3bin\5zBar.dll.

    Original title: (x 86) DLL error

    Try to uninstall coupon printer application. I get this message "c:\Program files (x86)\couponXplorer_5z\bar\3bin\5zBar.dll. How can I fix it?

    Hi Judy,.

    Thanks for posting your query in Microsoft Community.

    I understand that you receive .dll error message trying to uninstall an application and I'll be happy to answer your query.

    A DLL is a library that contains code and data that can be used by several programs at the same time. For example, in the Windows operating systems, the DLL la DLL Comdlg32 Comdlg32 performs common dialog box functions. Therefore, each program can use the functionality that is contained in this DLL to implement an Open dialog box. This promotes code re-use and the efficient use of memory.

    We will try the following methods and check.

    Method 1: Try running the fixit: problems that programs may not be installed or uninstalled. This utility removes all previous versions of the uninstalled programs corrupted registry fixes that corrects the problems as the new installer programs.

    Method 2: We will place the computer in a clean boot state

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    Method 3: Run the System File Checker tool

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    At the command prompt, type the following command and press ENTER:

    sfc/scannow

    Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Error in C:\Program Files (x86)\Intel\Bluetooth\btmshellex.dll since update 8.1 Win

    Hello

    I get this every time that I reboot my system (XPS One 27) since I upgraded to Windows 8.1.

    Error in C:\Program Files (x86)\Intel\Bluetooth\btmshellex.dll

    Entry missing: Tra &

    Does anyone know how to fix this?

    Any help will be appreciated!

    Kind regards

    Alan

    Hi Alan,

    You have any startup item that uses the Bluetooth feature (in my case I had Skype using my Bluetooth adapter)? If so, please try to disable such a request and check if you still receive this error message. If the error is still visible, please uninstall and reinstall the drivers for Bluetooth. You can find this video useful for updating drivers (this video is also good for Windows 8.1):

  • Tried to reinstall Windows7 and received error: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe".

    I am running Windows7 Home Premium and something happened to my computer not allowing me to run some of my programs, we get an error code, for example: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe". Make sure you typed the name correctly and then try again. "After several attempts to reinstall these programs with no solution, I tried to reinstall my OS.  After that I introduced my key code a message came up saying I had to rebuy a keycode to activate Windows 7. a black screen came and another message says that my version of Windows was not authentic and my OS was not fixed or reinstalled. What can I do to fix this problem without buying a new key code and spend a lot of money that I don't have? I'd appreciate any help you could give me!

    I have to reinstall my operating system using the custom installation available on my drive; However, I lost everything and had to reprogram all my files, folders and programs; but at least it didn't cost me another $109.00 for a new code. Thanks anyway

  • When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.

    When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.  Check the path and then try again. "Should I do to get my games back so I can play them?  I've tried enabling/disabling of Windows features, but it did nothing.  I also tried to go through the run, but that has not worked.  And, I tried command prompt, but it says that I am not the administrator, who I am.

    Not accessible games

    I haven't had any changes consciously, and the games do not work in any user account.  When I've done sfc/scannow (command prompt) he said that I was not the administrator.  I could learn from another source to solve this problem - in the start menu, right click on the command prompt icon, and then click Run as administrator.  Hope everybody help with this problem.  If you do not have command prompt in your Start menu, any type of command prompt in your search box and it should appear.

    Anyway, my games work now.  Thank you

  • Always get errors trying to control power 7651 YOKOGAWA on Labwindows/CVI

    Hello

    I'm trying to set the voltage on YOKOGAWA 7651 feeding through labwindows/cvi. I've set up a digital slide on my UI with callback function "yoko7651dcvolts" and the name of the constant "YOKO7651DCVOLTS".

    I always get this error when I run my program:

    "FATAL RUN-TIME ERROR: "DcSource.c", line 53, col 65, thread id 0x00001F3C:   Invalid argument type: found 'pointer to double', expected 'pointer to int'."

    This error indicates the third argument to the GetCtrlVal function below. The lack of program/compiler pass the variable "yoko1volts" as a whole, but I want to (and should) be able to settle the tensions as floating numbers.

    Of more, even when I said "yoko1volts" as a whole, it stills does not work. All I get is zero, zero and zero... on the power meter whenever I press the digital slide.

    This is the section of the C code which is problemic:

    int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface

        yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument

        break;    }    return 0;}

    It's the h-file related:

    #define  YOKO7651_1                       4#define  YOKO7651_1_YOKO7651SWITCH        2       /* control type: binary, callback function: yoko7651switch */#define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */

    Please help, how can I solve this problem?

    All pilots (including feeding YOKOGAWA 7651) are correctly installed and mounted. In fact, I can successfully turn the power supply on and off with the code below:

    int CVICALLBACK yoko7651switch (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    int yoko7651switchstate;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, &yoko7651switchstate);        SetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, !yoko7651switchstate);        yk7651_output (yoko76511Panel, !yoko7651switchstate);            break;    }    return 0;}

    It is just setting the voltage on the power supply which is very problematic. Any help is appreciated... Thank you.

    I second opinion Al of a disconnection between the UIR and the variable that contains the handle to the Panel.

    As a side note, I noticed that the problematic line reads the value of the controll which callback is executed:

    #define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */

int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface

        yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument

        break;    }    return 0;}

    In a situation like this, I will try using GetCtrlVal (Panel, control, & yoko1volts); Instead, which should get rid of all the problems in the control panel manage / control ID.

    Despite this solution works, anyway I'd be deep into the problem like a bad Panel can lead to erratical behaviors in other parts of the program.

Maybe you are looking for

  • OR PCIe-7851R compatibility?

    Hello I'm going to get a PC the appropriate for the Board of the NI PCIe-7851R. But I do not know what bus card PCIe use this forum, x 1, or x 4 or x 16? I'm sure it can work with x 16 'remote connection', but what about x 1? In addition, another thi

  • What is the difference between HP Photo Creations and Snapfish

    I've been curious. What is the difference between HP Photo Creations and Snapfish?

  • Reinstalling Windows XP

    How can I get my code product because the computer if I lost the label containing the code of the product, y at - it produces free software to find the code of my computer. Need help as soon as possible. TQ.

  • problems with my microphone.

    A week ago, I downloaded some songs from youtube video. Since I did that I have a problem with Skype. my friend can't hear me. I hope you can help me. I built in mic. then I do the complete control panel and checked Audio & Sound devices. and finally

  • Could not find contacts in mail

    After that I spent more than an hour to conclude my contacts from my application of people when I tried to email, there is no option to select my list of contacts.  How can I find my contacts?