Why am I see sitting "Homegroup journal" could not start with the following error: 0xC0000035

Similar Questions

• Journal of session "Homegroup" was able to start with the following error: 0xC0000035

  Hi my event error log says: session "Journal of home group", was able to start with the following error: 0xC0000035

  I don't have a setup of home group because I am the sole operator of my PC. (Windows 7 SP1 x 64).
  I assume that the error is so wrong? Y/N?
  If so is there a way to change the reports for this message?
  Thanks for all the support.

  Hello

  1 are you facing a problem to work with any application because of the error?

  2. do you have connected on a network printer?

  3. you remember changes to the computer before the show?

  I suggest you try the following:

  Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  Also, make sure that homegroup is not created on the computer, even if the computer is not connected to the other computer. When you configure a network device it will prompt you to create a home group. Check the following link to leave a homegroup.

  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• ErrorWindows could not start because the following file is missing or damaged. Windows root\system32\hal.dll where can I find? How can I fix error?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  I turned on the PC and you have question.  I am disgusted.  Now what should I do?

  Please follow the instructions below. If you do not have your windows disc follow instructions on the link below to create a bootable recovery disk console and then return here and continue with these instructions.

  1. Insert the Windows XP CD in the CD-ROM drive and restart the computer. If you are prompted to press any key to boot from a cd do;

  2. when the "Welcome" screen appears, press R to start the Recovery Console;

  3. If you have a dual-boot or multiboot, select the installation that you must Access from the Recovery Console.

  4. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER;

  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k). Let the scan to run until the end;

  6. to exit the Recovery Console and restart the computer, type exit at the command prompt and press ENTER.

  Once the scan is complete, restart your computer.  View your results.

  How to make a disc bootable windows Xp recovery console.

• Image processor "sorry, I could not deal with the following... * all."

  Hey! I so about 150 files opened in Photoshop. They are for a customer and the customer wanted individually to certain effects on each file. The files are RAW initially, first imported in Lightroom as .dng, then all my tonal changes made in Lightroom. I then opened images as smart objects in Photoshop, with a script of Lightroom. I then did the individual work on each image in Photoshop on the assumption that it would not trouble to save using the Image Processor script. When it came time to save, I tried save as .tif files using Image Processor. I selected the target in the form of open files files, set my destination folder, chose the TIF format and click on run in the top of the window. He shortly after said one very fast without source images, which disappears and then he says: "Sorry, I couldn't deal with the following" and then lists all of the 150 open pictures. It is a big problem because I'm on a lack of time.

  Any help or another idea for how to register all these images open in TIF or PSD even at this stage is extremely appreciated. I think there must be a fix or other road opposite to old fashion one save under...

  Thank you!

  !

  It doesn't look like the IPP will not new document either.

  He can. I added an option that can be set in the script to take care of this problem.

  //

  PROCESS_UNSAVED_IMAGES

  This will allow the treatment of unsaved images. To make this work,

  an unregistered image file is ~ / Desktop. If a file extension is

  not in the name of the image, .psd is used.

  //

  ImageProcessorOptions.PROCESS_UNSAVED_IMAGES = true;

  By default, it is false to get the 'traditional' behavior Set to true will leave PPI to process new images, not registered.

• Hi, I have another problem, when people visit my site that they could not return to the home page

  Hi, I have another problem, when people visit my site that they could not return to the home page

  Hello

  Problem is in outline view.

  Please follow the steps below and you should be all set.

  1. go in the Plan view.

  2. right click on the 'HOME' page

  3. Select "Menu" > "include the Page containing the hyperlink.

  4 save the file and then try to preview.

  

  You should be all set.

  Concerning

  Vivek

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  Please see:

  Redeem your student and teacher edition purchase, convert a redemption code to a number of series and much more .

  I hope this helps.

  Concerning

  Megha Rawat

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier