Why anti-aliasing Illustrator CC exported files in Photoshop, even when turned off anti-aliasing?

Similar Questions

• Why my OS took so much space and how can I turn off automatic Back-ups?

  Hi, I'm opperating on Windows Vista Basic Home Edition on top of a HP540 Tower, which has 160 GB hard drive.

  Except for the 20 GB Partition, I stayed with 129 GB to install a fresh on o/s.

  After installing my o/s and updates the 7Gig to clean Documents saved from after installation.

  I was left with 99 Go!

  Something wrong without a doubt!

  Even more, I'm losing memory on my hard drive like there is no tomorrow, 30 GB in 4 days!

  It seems every time I'm streaming videos, or even just to watch videos, an external hard drive.

  I lose about 1 or 2 GB!

  Using a number of antivirus programs, I scanned for a virus, but all programs concluded that the

  the system is clean and that there is no virus!

  This led me to believe that the system backup and restore several coppies of his car, then

  I have used the disk clean up to remove all but the most recent backup file.

  All of a sudden my disk space is increased from 69BG to 99 GB.

  I still don't know what happened to the other Go 20 or 21.

  Although this seems to be a difficulty, with in a few minutes that the backup has been busy writing far still and in

  15 minutes that I had fallen to 97.3 GB and deminuishing.

  Why my OS took so much space and how can I turn off automatic Back-ups?

  Thank you very much!

  Nothing wrong as far as I can see.  A Windows installation will take about 20 GB to 30 GB so it's fine, and you will lose even more space for virtual memory to system management file, hibernation, system restore points file and so on.  Although the "30 GB in four days" is perhaps a little on the high side, considering that you have just installed Windows, there are a lot of household, creating files and so forth go on these days.

  With the help of disk cleanup to delete these files from system restore is a bad choice, because they are created to ensure the security of your system and allow you to recover from any problems that may require them.

  If disk space is as big a problem to get a bigger hard drive and let the system restore to do its job.

• I do not seem able to open my Canon raw files in photoshop. When I press updates nothing happens.

  I do not seem able to open my Canon raw files in photoshop. When I press updates nothing happens.

  This table shows the version of ACR required for your camera.

  Devices supported by Camera Raw

  Until you are able to resolve the problem, download and install the Adobe's DNG Converter.

• Why my mp4 exported file look so bad when it is viewed in an adobe acrobat pdf file?

  I have integrated a file in adobe acrobat (exported from first pro cs6) mp4 video and his dull my video more viewing. It was a strong video seen in exported mp4 files and the Prime Minister, but once embedded in acrobat it loses sharpness, anyone know what could be the problem? My settings in adobe acrobat may be wrong? I think the problem is in format adobe acrobat from the crisp views exported mp4 video and clear before car sound, any ideas to ensure sharpness with my video after its embedded in the pdf from adobe acrobat?

  Hoping someone has an answer to that, I think that my problem could be in the settings of adobe acrobat?

  or maybe there's no way around and I need to wait for this video to not look as crisp and clear, after I add him in acrobat... because this is when viewing in first pro, mp4, etc.. ???

  Any useful information would be greatly appreciated.

  Someone, I'm sure takes the files exported from their Prime Minister and coating to create pdf files? Would love to hear if someone has encountered this problem.

  Thank you very much in advance for any help offered.

  Hi Dave,.

  I just finished a test and comparison between the two PDF files,

  compare the file as you suggest with the floating option and change the setting to the actual size of the premier pro original / mp4 file size and

  the old pdf which did not use the floating size and file option.

  I see a slight difference. The PDF file with the floating window with the original dimensions match clips media appears as a tray to vegetables.

  I will be having the final pdf document updated use this method for the mp4 embeded movie and hope the Department doing this (next step of this work) agree that it is better to use your steps to integrate all the video files into a pdf file.

  Thank you very much for your time.

  I hope you had a good holiday and hope you have a very healthy and happy new year.

  Thanks, Amy

• Why I can't open raw files in Photoshop?

  Why Photoshop CC will not open the raw files from my Sony alpha 7R?  How should I do?

  • Please log out of the desktop creative cloud application.
  • Go to Preferences > sign out
  • Reconnect and check if you get an update.

  

  

  ~ Sarika

• file SQLNET.ora trace occurs even after turning off tracing

  Hello

  I recently added the following parameters to the sqlnet.ora file.

  TRACE_LEVEL_SERVER = 16

  TRACE_FILE_SERVER = SERVER

  TRACE_DIRECTORY_SERVER = / ftpland/trace

  TRACE_TIMESTAMP_SERVER = we

  
  

  Even after you remove these enteries the sqlnet.ora I can still see the files being generated trave.

  tracing #enable # #.

  #Trace_level_server = 0

  #Trace_filelen_server = 1000

  #Trace_fileno_server = 1

  #Trace_timestamp_server = we

  #Trace_directory_server=/opt/oracle/product/10.2.0/network/trace

  #Diag_adr_enabled = off

  ######################################

  AUTOMATIC_IPC = ON

  TRACE_LEVEL_CLIENT = OFF

  SQLNET. EXPIRE_TIME = 10

  NAMES. Domaine_par_defaut = bsca.eds.com

  NAME. DEFAULT_ZONE = bsca.eds.com

  SQLNET. CRYPTO_SEED = "232166927-1713903352".

  NAMES. DIRECTORY_PATH = (ONAMES, TNSNAMES)

  NAMES. PREFERRED_SERVERS =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = TCP.bsca.eds.com)

  (PROTOCOL = TCP)

  (Host = oraclenames1.bsca.eds.com)

  (Port = 1575)

  )

  (ADDRESS =

  (COMMUNITY = TCP.bsca.eds.com)

  (PROTOCOL = TCP)

  (Host = oraclenames2.bsca.eds.com)

  (Port = 1575)

  )

  )

  NAME. PREFERRED_SERVERS =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = TCP.bsca.eds.com)

  (PROTOCOL = TCP)

  (Host = oraclenames1.bsca.eds.com)

  (Port = 1575)

  )

  (ADDRESS =

  (COMMUNITY = TCP.bsca.eds.com)

  (PROTOCOL = TCP)

  (Host = oraclenames2.bsca.eds.com)

  (Port = 1575)

  )

  )

  BEQUEATH_DETACH = YES

  Kind regards

  VN

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ROSDMP.bsca.eds.com)

  (ORACLE_HOME = opt/oracle/product/10.2.0)

  (SID_NAME = ROSDMP)

  )

  )

  TRACE_LEVEL_LISTENER = 16

  In my opinion, this is the reason, you see the same trace files after the neutralization of him in sqlnet.ora

• Why adobe reader plugin shows as not being updated, even when it's the last version

  Hello
  I have the latest adobe reader. When I check the plugins from firefox, it says that it needs to be updated. But once installed, it closes as showing that the last adobe drive is already in use, and the only thing I can do is to get out this message with the button FINISH. Now, if it is still activated, the firefox plugin shows is not up-to-date. Some of these photos on the web page are not correctly captured. How to get rid of this problem. Is this a problem with FF or AR

  edited to remove the spaces to the left causing a horizontal scroll bar to appear in the details

  Hi jraju, that's exactly right: the plugin check Web site is currently wrong. If your product Adobe says that it is up to date, it is the most accurate information at the moment.

• Why Firefox 4 is not save my browsing history, even when the setting is set to hold, and the incognito isn't on?

  Since the update 4, my browsing history is not saved. The settings say that we recall history, and private browsing is not on. Does not work on my computer at home (64 bit Win7) or desktop (32 bit, XP).

  I had the same problem after upgrading to FF3. Solution:

  [https://support.mozilla.com/de/questi.../803069#answer-167598]

• Why do Satellite A100 screen flashes when turned off?

  Hello
  I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

  Hello

  What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

  I also suggest you update your bios and your drivers, maybe it s just a software related issue...

  Here´s a link to find the bios and latest drivers for your computer:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Give some information about this case, could be interesting, what problem is.

  See you soon

• Why my battery drain when turned off?

  Paste to my computer laptop Toshiba Satellite L750/L755 drains completely when the laptop is off.

  When the laptop is running on a fully charged battery life of the dough is very good for me which suggests that the battery is fine.

  Any ideas on what could be the problem? The installation program or hardware?

  Hello

  What operating system is installed on the computer?

  Check out the following link and check:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  It could be a hardware problem; Therefore, you can contact the manufacturer of the laptop using

• Why my internet accounts automatically get disconnected after that my computer turns off by itself?

  I have a Compaq PC with processor Dual-Core AMD Athlon X 2 5000, and it runs Windows Vista Edition Home Premium... In my view, that is running Service Pack 2. I use the computer to check my e-mail, my YouTube and Facebook accounts (and possibly other accounts spread I connect to).

  I usually use Internet Explore to browse the web. Sometimes my computer turns off by itself due to overheating. But whenever when this happens, when I turn my computer back on and return to the use of the Internet, I've totally frustrated to find that all my accounts were automatically disconnected!

  Even when I check these boxes to keep me connected to these accounts when I turn on the computer again after a successful stop, my accounts still get disconnected!

  It only seems to happen when my computer turns off by itself without stopping... mainly due to overheating. When I turn on the computer again after a successful regular stop, my accounts are automatically saved on once again, due to activate me "Keep me connected" by checking these little boxes. But after a situation when the computer is off all the time (either by himself for a reason, either by me with strength to turn it off when my computer crashes), my accounts do not remain.

  How can I prevent my accounts automatically be disconnected so that whenever I start the computer, after it turns off by itself, my internet accounts turned on? There must be a patch for this embarrassing situation here on the internet.

  Perhaps because an improper shutdown / forced can inpact on different parameters.

  Your must not PC in all cases be having heat problems, you need to fix this (heat) before it turns into something terminal

• Why the Photoshop in Lightroom export file downgrade the size of the original when I reimport

  Why the export file to Photoshop and re-import in Lightroom downgrade the size of the original

  I export my raw 24 MB for Photoshop file
  It creates a file of 80 MB tiff (aprox)... Ok

  

  When I do a "Save as" file directly in an external file, I always have a 80 MB file

  

  But when I save the tiff from Photoshop file directly in Lightroom the downgrade from 14 MB file !

  

  
  Is this a problem of the actual display metadata?
  Because when I search the TIFF of the changes, it isn't always to 85 MB 14, 3 MB?

  

  I check each preferences everythings seems to be good

  Please I need help

  The info so that the image does not appear the size in megabytes of the image, but rather the number of megapixels. Megapixels do not directly translate to the size of the file. Right-click on the image and choose to display the image in the Explorer or Finder, depending on your operating system. Then you can see how big the file is in reality.

• Exporting files

  Hello

  I'm a teacher D & T, looking to start using Illustrator with my middle school students. Does anyone know how effective this program is to design 2d drawings?

  Also, illustrator can export files as dfx?

  Thank you

  1. that depends on the context. What kind of designs? What industry?

  2. Yes.

• When I run an analysis complete, there is a 'ultrww.cab' file and the computer turns off. McAfee said to contact Microsoft technical support on this subject

  When you run a full scan by McAfee, my computer comes in a file named "ultrWW.cab" and turns off.

  McAfee said to contact Microsoft technical support on this subject

  What a lame excuse.

  Make an indication where ultrWW.cab?  See this thread on a similar problem with Kaspersky AntiVirus: http://forum.kaspersky.com/index.php?showtopic=80688

  If the file that causes the problem is in a subdirectory of C:\MSOCache, you can remove the entire C:\MSOCache and all its subdirectories, but use disk cleanup (start > run > cleanmgr > OK) to do.  Read both of these items first:
  http://ask-Leo.com/whats_msocache.html
  http://support.Microsoft.com/?kbid=825933

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.