Why are my spyware and malware to date does not

Why are my spyware and software updates and malicious addresses do not to update yet is obsolete

Why are my spyware and software updates and malicious addresses do not to update yet is obsolete

Can the operating system that you failed to mention , to update with success? If this isn't the case, then your system is probably infected.

Please provide more information as well as a person likely to help you:

Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others). With this in mind, we ask that you post at LEAST the following information. If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

Minimum to publish information: Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...) Post also if you use 32-bit or the 64 bit version of Windows.

Update the number of the last update installed before any problem. If you do not know the number of update, then give the date that the update has been installed. The number of updates update failed.

Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

Other information to validate:

Measures already taken to correct the problem and the results of the measures. If the question is never happened before with other updates.

A few other useful parts are:

What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.

If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

While we await information above, strongly suggests that, using Internet Explorer , you try to have the system scanned with the OneCare Safety Scanner

If the system can not be analyzed , then it is definitely infected. You can getno help from the charge in getting cleaned from Microsoft.

Click this link to start your Support request .

MowGreen Services update - consumer safety

Tags: Windows

Similar Questions

  • Am curious to know why XP Pro crashed and reinstall the will does not activate

    Have a system that ran XP Pro for a couple of years without problem. Software and license (product key) was purchased online, downloaded and burned to CD. Once installed, OS signals like SP3 XP Pro Version 2002. First installation and activation years was fine. Reinstalling/reactivating later a year later due to a failure of the drive was fine. System had presented a Genuine Advantage test and been patched now with no problems. Last week we had errors saying the OS was not authentic and we could be a victim of a counterfeit. System crashed and when restarting it gets to the login screen, but if the connection is attempted the desktop and in a minute or 2 the system restarts and goes in a loop of reboot, never load the new OS. Start in safe mode gets through the initial steps, but after the start of files loading the system restarts and loops. No configuration of the software/hardware/don't change in recent months and no unusual entry in case do not connect up to 2 days before the accident. No indication of hardware problem and no cases of virus or malware of MS Security Essentials. I tried repair OS, no help. Now have wiped the hard drive and tried to reinstall the operating system (computer, no change) and it will reinstall correctly by using the original product key, but will not activate. Reports as not a valid product key. Activation of the phone I tried and it will activate not there either; reports as invalid product. Considered we could have actually gotten pirated OS, but I'm puzzled why, if the software was fake, the system would work very well for if long including product activation earlier and passes test Genuine Advantage, then suddenly crash, cause errors 'potential infringement' and do not allow for reactivation. Thought at some point, the system has had virus/malware issue, but this does not explain why the relocation after the failure of the drive fails to activate. System critical to the needs of companies and has been replaced so no urgency to correct but I'm very curious to know what might happen. Comments or suggestions would be welcome. Thank you!!

    I checked the key used, and here's the information that my tool tells me about the key:
    (1) version of Windows XP Pro MSDN
    (2) is blocked Activation (reason: abuse)
    (3) no Validation blocked
    (4) shows no sign that it is a basic time license (TBL)
    (5) 31 attempts to activation
    (6) 17 total Activations
    (7) first activation on 2010-08-03
    (7) last Activation successful 13/04/2010
    (8) date of the first activation has been blocked 13/01/2011 (note: this is not necessarily the day, the block has been applied, just the first attempt of activation which is refused due to the block)

    It is d ' attribute of strangeness between this key and "information" which include the Genuine Advantage you said.

    First of all, it's a MSDN license which means that someone can not use the key unless you have an MSDN subscription.

    Then, the key is blocked but not blocked Activation Validation.  It's unusual because usually, if an MSDN key is proved have been hacked (sold outside it's allowed) would be blocked the key activation and Validation.

    In this particular case, it seems that the key has been blocked because of too many activations Activation (on computers with different hardware ID, which usually means different computers) in a short period of time.

    As for the key being a limited time license, which makes no sense.
    (1) I don't see that a MSDN key would be time limited.
    (2) if the key has been blocked due to it having expired, then the reason for the block would be expired are not abusing.
    (3) the key was first activated in March 2010 and the person you talked to said that the key expired a week (i.e. 2011) there. Limited time Licenses are generally used to try before you buy things and I don't know any license based on the time that a period of over one year (16 months to be exact).

    I am convinced that the person that you talked to was wrong that this key was a limited time license.

    My assessment of the information I have available suggests that the key was actually blocked in 2010 due to excessive activation in a short period of time.  I say this because, shows the history of activation:
    (1) first activation in 08/03/2010
    (2) last activation successful 13/04/2010
    (3) 17 total Activations

    This shows that the key has been used 17 times, on 16 different computers, in a little over a period of a month. This does not seem excessive. and strongly suggests that the key has been blocked for this reason, in April 2010. You just didn't notice the block until the end of 2011.

    However, even if the current issue was caused probably by a number excessive activations (which can be fixed by asking that the key be unlocked) the real problem comes from the fact that the key is a licensed MSDN.  The permits required that any key from an MSDN subscription (what to do with all the MSDN keys) can be used by the owner of the MSDN subscription. If you do not have the MSDN subscription that come from this key, you are not allowed to use this key.

    Thank you

  • Why are my palps buttons doesn't work does not correctly after working fine for weeks?

    I have not touched the site until I heard that there is a problem today. The drop down menus are not displayed to the top.


    Sometimes if I hit refresh or publish the site again, they show once again. then, after testing to see if they work, they disappear again.

    I installed at the exit on April 2 to see if it is useful, and it did not.

    I talked to paypal and tested the buttons on their test Web site and they worked very well.

    I do not use the widget in Muse to create... I copy and paste the creator code for button paypal.com.

    Anyone else having the same problem?

    Please help if so. Thank you!


    In this case, users click on paypal and cancel, then repeat the same process in the same browser. This can be the reason for the drop down or paypal button problem as browser stores the information each time. If its best to erase browser cookies and then check.

    I would like to know if you want to test me with a specific browser or device.

    Thank you


  • Why are the latest updates on my site does not appear online?

    They look fine in preview, but once I hit publish the site still has the old version.


    Can you check with another browser or try to clear browser cookies.

    If there is still the same, please share the url of the site.

    Thank you


  • Avast fixes all the problems of spyware and malware?

    Original title: Avast

    Avast fixes all the problems of spyware and malware?

    Well Yes, it does. (98.5 ~ % of threats, if I remember well, which is above average)

  • Why are my preferences and my 'Tools' menu in gray and how can I solve this problem permanently, not whenever I go into a PDF?

    Why are my preferences and my 'Tools' menu in gray and how can I solve this problem permanently, not whenever I go into a PDF?

    Also how can I get each pdf open to 100 viewing?


    Hi Jason,

    Can't you see it's not "SECURE" in the title bar for documents where the tools are grayed out? If you do, which would indicate that the document has been password protected and perhaps editing restrictions.



  • Error: "C:\Program Files\FileName\filename\unis000.dat" does not exist and cannot uninstall the program

    Original title: How can I removed the programs installed that I tried to uninstall, I get a message file does not exist can not uninstall what I do next

    Hello, well this is not the only program file I have in my list of programs in the programs and features. I get the same message when I try to run uninstall them. I get a red alert response in a separate box. This warning;  File "C:\Program Files\FileNmae\filename\unis000.dat" does not exist can not uninstall.

    Hi LuckySafeHaven,
    -What version of the operating system are you using?
    -With what program to this problem?
    -What is the name of the file that is mentioned in the error message?
    unins000.dat is a library of dynamic links associated with malicious software (dll). Legitimate dll files contain a set of executable functions that can be used by Windows applications. The dll associated with the malware containing malicious code that causes damage to your PC.
    Try to remove the folder/filename mentioned the location C:/Program Files.
    Scan your computer to remove malicious software.

    Do a full scan of the system with the Windows malicious software removal tool and search for malicious software present on your PC.

    Microsoft Windows Malicious Software Removal Tool to help remove specific prevalent malicious software from computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds. Microsoft releases a new version of the tool each month.

    See this link for more details:

    The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000

  • . Error... my clock and date does not work...


    my clock and date does not, that why I can't update my pc or I can not install updates... Please help me

    Thank you.

    Do you mean that you can not set the date & time on the tray system 'clock '? Or you can, but it changes when you reboot the machine?

    It is a laptop or desktop?

  • When I complete and sign a form and then print it out, the form data does not print.

    When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

    Thank you. Depending on your answer, I have compiled a procedure:

    Fill & sign a form in Adobe CD and print the form fields:

    (1) open the document.

    (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

    3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

    4) click on the first field in the document, make a right click, select Properties.

    (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

    (6) print out and save the file.

    Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

  • Why are the plugins Java required by medical systems not allowed to be reactivated, allowing medical facilities continue to operate?

    The problem with the more recent blacklist of the East, it is that the health care industry is behind in technology. Many medical systems is old and need older versions of Java to work. The blacklist because of countless facilities to lose the ability to water rescue medication order. Even my tech support office was bombarded with phone calls about this for the last 2 days. What can be done to allow these older versions of Java work in Firefox and restore the facilities to full operation?

    Hi JRChadwick,

    Sorry to hear about lag in technology of the health industry. There are older versions of Java Active. Oracle has released a update in February that resolves the security issue. What does Mozilla has been a softblock on it, which means that users get a notice this plugin it will be disabled and give them the option to activate it. To enable:

    1. Go in Tools > Modules > Plugins.
    2. Next to Java, click Activate.

    If the Enable button is not available, the block lists should have been updated before that Mozilla has changed to a softblock instead of a hardblock. In this case, follow these steps:

    1. Go to help > troubleshooting information.
    2. Click Open containing folder. That should open your profile folder in Windows Explorer.
    3. Closing Firefox.
    4. In your profile folder, delete blocklist.xml and pluginreg.datfile.
    5. Launch Firefox.

    At some point after that, you should then get prompt blocklist, but this time the ability to not disable it should be there.

    But I can't really emphasise this point: these versions of Java are actively used and the latest version is not vulnerable. If there is no chance, you can use the latest version of Java with the medical systems, this is the way to go.

  • I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

    I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

    Hi Yanni,

    Tethered shooting works fine with Lightroom 6.4 on El Capitan.

    You can then go ahead and buy Lightroom and perform the tethered shooting.

    Kind regards


  • Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

    Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

  • I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

    I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

    Any suggestions apart from simply all formatting?


    Exploit: Win32 / Pdfjsc.Dr

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free

    SuperAntiSpyware Portable Scanner - free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool

    Microsoft Malicious removal tool - 64 bit

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).


    If necessary here are some free online scanners to help the



    Original version is now replaced by the Microsoft Safety Scanner

    Microsoft safety scanner



    Other tests free online


    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    RUN - type in the box-


    Then run checkdisk (chkdsk).

    RUN - type in the box-

    Chkdsk /f /r


    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)



    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.


    If you are in North America, you can call 866-727-2338 for virus and spyware help
    infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Bit data does not record

    only two field data does not record. I placed a script, it works fine, but when it is open after saving a file, the fields are empty. Why this happen?

    event of calculation:

    var a = Itemnumber.rawValue;

    rowb var = xfa.resolveNodes ("form1.page2.Subform1.Table1.Row2 [*]");

    rowc var = xfa.resolveNodes ("form1.page2.Subform2.Table1.Row2 [*]");

    var WDT = xfa.resolveNodes ("form1.page2.Subform3.Table1.Row2 [*]");

    for (var i = 0; i < rowb.length; i ++)


    var b = rowb.item (i). Calculation.rawValue;

    var bb = rowb.item (i). Total_dispensing. RawValue;


    var x = bb;


    for (var i = 0; i < rowc.length; i ++)


    var c = rowc.item (i). Initial.rawValue;

    var cc = rowc.item (i). Site2.RawValue;


    var y = cc;


    for (var i = 0; i < rowd.length; i ++)


    var d = rowd.item (i). ActualPatients.rawValue;

    var dd = rowd.item (i). Actual_patient. RawValue;


    var z = dd;


    this.rawValue = x + y + z;

    If (this.) RawValue == 0)

    this.rawValue ="";

    In addition, I use acrobat X pro. another field of data in the same form to be saved.

    I extended my sample to manage the numbers Actual_patient as well, it looks like now.

    If (!.) Itemnumber.isNull)


    this.rawValue = 0;

    rowb var = xfa.resolveNode ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

    If (rowb! == null)


    this.rawValue += rowb. Total_dispensing. RawValue;


    rowc var = xfa.resolveNode ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

    If (rowc! == null)


    this.rawValue += rowc. Actual_patient. RawValue;



    And if the number can be duplicated, then it would look like.

    this.rawValue = 0;

    If (!.) Itemnumber.isNull)


    rowb var = xfa.resolveNodes ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

    for (var i = 0; i)


    this.rawValue += rowb.item (i). Total_dispensing. RawValue;


    rowb var = xfa.resolveNodes ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

    for (var i = 0; i)


    this.rawValue += rowb.item (i). Actual_patient. RawValue;



    I updated my sample https://acrobat.com/#d=uQmAFWaVoHydJQ1Xtf0QhQ

    I still don't know how the values of number, calculation and ActualPatient are created in my example, you have to key in, once indexed in the match of calculation the expected results, you posted.



  • date does not appear in the message list

    For the many emails I get from various accounts date does not appear in the list of messages, only time.
    It seems that these messages were received today, in fact they are old.

    Encountered this problem on 2 different PCs, 3 different email (gmail and own server) accounts.

    What could be the cause and how to fix it?

    IF you select Ctrl U _ on one of these messages, there is a right of the line at the top of the message
    -Killed Mar 25 10:09 2014 is a message that I received today. This is the date and time Thunderbird has calculated, he received the message

    Lower on the list

    Date is: sub form Date: Monday, March 24, 2014 23:32:50-0000

    These two are of the same email.

    E-mail uses time GMT so that the message has been sent to 24 March 2014 23:32:50 GMT.

    Thunderbird uses my locale information to know that my timezone is GMT + 09:30 by result Mar 25 10:09

    If your seeing odd times instead of dates, check that the information is correct as above.

    Note that if the sender is their computer set to 1970 date then you will get mail today from them with the date of 1970. Even if they think it's in October that is what will show their mail. This is most important when dealing with people with limited computer skills. They do not appreciate that the date and time zone information are really relevant to them at all.

    A favorite of spammers is to use a date in the future, so their junk is at the top of your e-mail list until you actually do something with it.

Maybe you are looking for