Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

The line-in input on a Mac requires an entry amplified, not a single entry.

The headphone includes a contact mic. See:

How to use the Apple earphones with remote and mic with your Mac - Apple Support

You can also het USB mic input devices

Tags: Mac

Similar Questions

  • Why I don't get a response from the Dept. serial number already contacted them twice with ZERO response. I have included my product code and proof of my job as requested but nowt back! ??

    Why I don't get a response from the Dept. serial number already contacted them twice with ZERO response. I have included my product code and proof of my job as requested but nowt is back!

    Kingussie81 that I saw the account that you used to post on this public forum and your Creative Suite 5.5 Design Premium education serial number is registered under your account at http://www.adobe.com/.  For more information on how to locate your serial number registered please see quickly find your serial number.

    If you need to download a new copy installation files, they are available to Download CS5.5 products.

  • Why can I not use applications downloaded from the Internet

    I downloaded Open Office and I get an error message that I cannot use the applications downloaded from the Ap Store.

    How can I change this?

    Mary Lou

    CTRL-click it and choose open. Otherwise, open the security & confidentiality of system preferences, click the general tab, unlock the pane and change the setting to a less restrictive.

    (137111)

  • Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

    Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

    You may have turned on "Selection of object by the path only" in 'selection Options.

  • An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

    An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

    It is one of the many problems that occur on my mac.

    Update of OS X El Capitan 10.11.4?

    1. backup Mac.

    2. install 10.11.4 combo update.

    https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

  • Why can I not install photoshop addition to the cc2015.

    Why can I not install photoshop addition to the cc2015.

    "Adobe Extension Manager cannot install because it requires

    Photoshop at least version 13.0"

    Please refer to other posts on this topic, but essentially the extension manager is not recommended for 2015 of CC. You must use CC Desktop App for facilities instead.

  • Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

    Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

    Hello

    1. this happens when you plug in the headphones?

    2. this happens to you while streaming music online?

    3. when exactly you get this message?

    Please follow the steps mentioned below.

    Method 1:

    Follow the steps mentioned below.

    a. click the Start button.

    b. in the Start Search , type Device Manager and press ENTER.

    (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

    Method 2:

    Please run the troubleshooter mentioned in the article below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    See also the below mentioned link.

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  • Why can I not select an object using the direct Selection tool?

    PHOTOSHOP: I have an ellipse I have rasterized. Why can I not use the direct selection on it?

    The direct Selection tool is designed for use of vector path.

    If you want to use the tool, you can get your selection by going to the Panel traced and clicking the work path make the symbol at the bottom of the Panel, a path

    Then, if you choose, you can click the load path as a selection symbol to return to the moving dotted line (rasterized).

  • Why can I not see my paths when the line is white?

    (NB. This could be a bug of Win8 beta)

    In Adobe Illustrator, I have several paths. When I put their race in almost any color I can see them. For example here, they are black:

    AI_black.jpg

    (Note that I have my plans of work hidden using the 'View' button-> menu 'Hide work plans', and I document established simulating (green) colored paper.)

    But if I change the white line, I do not see the paths:

    AI_white.jpg

    They are still there, you can see the anchor point etc. when the paths are selected:

    AI_selected.jpg

    But they are not visible. What is going on? Is this a bug (I use a beta version of the operating system) or am I missing some setting that I do with the visible white lines? They are really white, export in PNG seems fine, why can't I see them in Illustrator?

    I'll tell you that it's a bug then.

    Using color paper simulate the document updated in place, a way of drawing, by setting white outline, making sure that overprint Stroke is NOT checked in the attribute Panel... should show the race. If not, it must be a bug somewhere.

    Maybe in Illustrator...

    Try this... Choose View > show transparency grid. I bet that the trait to appear as if by magic.

  • Challenges of the audio input jack (seems not work)

    Hello

    I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

    Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

    Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

    I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

    Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

    Any suggestions on how to proceed and get my audio jack working again please?

    Kind regards

    Klmdb

    Hi @klmdb

    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

  • Why can I not get a video downloader? They disappear and or not displayed after selecting them in the area add to the page?

    I had a simple easy Downloader on my page of fox, he left a green arrow in the download bar, all I had to do was click on it and choose the type I wanted (mp3 or flv etc) but youtube gave me adifficiles time when I tried to download the most video, I'd get all those as the first , so I tried a downloader different he showed a video reel as it's symbol and it seems to work but then I clicked on accedently on something and he disappeared. Now, when I go to the Add-ons to get one it says I did succsessfully but does not appear when I return to my home page? Can you help with this problem please!

    I have a good video software download I recommend and use, is the Freemake Video Downloader. It of free and comes with a Firefox Add-on.

    I use it to download my friends YouTube videos.

    NOTE: This program is NOT to be used for piracy or any other unlawful activity.

    WARNING: Always be careful when downloading content on the internet. I will take no responsibility for any damage caused by a download. Download at your own risk!

  • Why can I not access a computer2 from computer1, but not the other way around?

    I have a home network using the ethernet cable connected to an ATT Wireless and wired modem/router wired. Vista premium Computer1 and computer2 has Vista Home premium. Both printed and discovery / network file sharing on. The two appear on the network and sharing Center. I tried to turn off the two firewalls, configure permissions and shared file. Always the same. Computer1 can access computer files/programs. But computer2 is impossible. I get an error code: 0 x 800. I looked at the error online code, but the answers don't give me what I've done; share the installation program, permissions, firewall, reset the modem/router. In addition, the computer that has the problem?

    Hello

    1. What is the exact error message you received?

    2 have you made changes to your computer?

    I suggest you to follow the links and check out them.

    Method 01:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 02:

    Share files and folders on the network

    http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-and-folders-over-the-network-from-Windows-Vista-inside-out

    Method 03:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  • Why can I not get my apple id/icloud to activate on my phone or my mac through messages and facetime?

    I have my icloud signed into my phone and my macbook pro, but when I try to access my messages/facetime with my apple icloud id / it refuses to let me. It happens with a phrase that says "an error occurred during activation, try again." I have tried this several times now and always get the same thing. Thus, all o fmy software are up to date. Can't I not connect on my phone and a mac, but not my icloud account back up my phone. I can only back it up to my macbook. How can I solve this problem?

    See if that helps - If you get an error when you try to activate FaceTime - Apple Support or iMessage

  • Why can I not get the contours of each symbol?

    Greetings,

    I have a problem I did the research for some time and have yet to find something that works. If someone could help me with some suggestions it would be greatly appreciated.

    I'm looking for a simple method quickly convert all filled with symbols and characters to the described features. I have a lot of files similar to this one, so I hope its something I can repeat easily.

    file: http://dl.dropbox.com/u/45909338/drw0002.pdf

    The problem is that each character or symbol is not a simple filling. Instead, the filling consists of many forms. Each form has its own plan. It is therefore very difficult convert the image in all the theoretical outlines of characters and symbols.

    1.jpg< Original file 2.jpg < Segments (hard to do with coloring)

    3.jpg< Ideal describes the format for acronym

    I have already tried using the merge tool in the Pathfinder, but this merge not all forms of filling.

    1_1.jpg< Front 2_2.jpg < before poster in "outline".

    3_3.jpg< After a 'fusion', they always have extra lines in the characters

    Does anyone have any ideas how I can 100% gives an overview without having to edit each letter or symbol manually?

    Thanks for your help,

    Sammy G

    You first need to describe everything. Faster is to flatten transparency via the command in the menu object. Check the features of text and the Contour contour. After this "fusion".

  • Why Panel does not KeyBar 1.8 from the list toolbar?

    Remove knob remove not toolbar KeyBar 1.8 in Control Panel.

    Hi Frank,

    1. what happens when you try to uninstall the program?

    2. do you get an error message?

    3. are you able to work with the specific program?

    The list of currently installed programs in the Add / Remove Programs lists all compatible Windows programs that have a program Uninstall or feature. Sometimes, a program may not be removed completely, and remains the registry key that is used to display the program in the currently installed programs list. In this case, you may need to manually remove the program in the currently installed programs list in Add / Remove programs.

    You can try the Fixit and if it fails, you can proceed to method 2.

    Method 1:

    You can run the Fixit and follow the steps:

    Reference:

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/program_install_and_uninstall

    a. click on "accept".
    b. Select 'detect problems and apply the patches for me.
    c. Select "Uninstall."

    d. Select the program from the list and try to uninstall it.

    Now search for the question.

    Method 2:

    How to manually remove programs from the add tool / remove programs

    http://support.Microsoft.com/kb/314481

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    KB322756 http://support.microsoft.com/kb/322756

    Hope this information helps. Response with status so that we can help you.

Maybe you are looking for