Why can I uninstall executable programs Apple "Apple Application support"
"Why do I not the option uninstall executables" Apple Application support Apple "&" Apple mobile device support "? When iTunes is not working then? How to resolve this situation?
iTunes is dependent on the Application Support Apple and Apple Mobile Device Support. Usually the only reason to remove their independent would be to solve a problem with one of the components. See install missing components for a method to refurbish the or see troubleshoot problems with iTunes for Windows updates for general advice. The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.
TT2
Tags: iTunes
Similar Questions
-
I can't uninstall a program. Why?
Whenever I try to uninstall this program, nothing happens. I tried clicking the button uninstall several times, but he was told to wait until he did uninstall. I'll come back later and its still there. I uninstalled before and when I did, a saying, that I needed a password came and after it was entered, it uninstalled without problem. Not knowing much about this side of computers, I went to the internet to study. I came across someone suggesting install RegCure Pro to clean a computer with problems. I did it, it scanned my computer and said that a lot was wrong with her. To remedy, however, I had to buy, which I have not yet done. The fact that the things wrong with my computer has any connection on why I can't uninstall this program?
Hello
· Are what program you referring?
· Did you do changes on the computer before the show?
· The issue is limited to a particular application?
· What is the exact error message?
Follow these methods.
Method 1: Unregister and re-register Windows Installer. Follow these steps:
(a) click on the Start Menu.
(b) type msiexec /unreg , and then press ENTER.
(c) click on the Start Menu.
(d) type msiexec/regserver , and then press ENTER.
Method 2 : If the steps above fail, check if there are amenities waiting on the computer using the registry.
Empty registry key "InProgress".
Check the following registry key:
HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress
Empty/rename "PendingFileRenameOperations" registry key
Check the following registry key:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
-
Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I can't uninstall a program on my laptop (MyWebSearch-Zwinky)
I can't uninstall a program on my computer laptop (MyWedSearch-Zwinky) he said that he could not find specified package. What can I do? Help, please...
Hi ginger,
It's Jason with Mindspark Interactive Network technical support.
We want to assure you that, contrary to what you may have read or heard, My Web Search® and its related products is not and has never been malware, spyware or adware. In fact, the My Web Search toolbar has been tested by the editors of security software and has been shown repeatedly to be free of any threat.
The toolbar can be removed by using the standard Add/Remove feature of your Windows operating system.
Important: It is not advisable to manually remove any files or registry entries, or to use the 3rd party software that can leave artifacts behind.Please note that you will continue to see the My Web Search toolbar until you close and reopen all instances of your Web browser. A reboot will complete the uninstall.
We hope this helps, and that in the future, you will take a second look at the My Web Search toolbar.
For more information on the Mindspark or My Web Search toolbar, please visit -
I can't uninstall a program from my control panel
I can't uninstall a program from my control panel
Original title: I can't uninstall at add on my control panel
Hello
It helps us to help you if you tell us the name of the program.
Try this free Revo Uninstaller program to remove it.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
And scan your system for malware:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
-
I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover
http://www.Nero.com/enu/tools-utilities.html
Uninstalling a Nero product did not work properly?
Use Nero General CleanTool to delete all remaining Nero entries from your system.Read the above info.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 says that I can't uninstall a program because I don't have the admin rights, but I am the only user on this computer and I am logged on as administrator.
Please ignore the lectures about how I'm not supposed to use the machine as admin all the time and help me solve the problem. :)Hi EnergyIntell,
-Uninstall on what program are you facing this problem?
I suggest you to run the fixit and check if it helps.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0
I suggest you check if you're facing the same question in an administrator account account / new user.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf you are not facing the same problem in a new user account, it is understood that the user account is damaged. You can check the link below and use the steps provided in difficulty a user account is damaged.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile -
I'm trying to uninstall a program by going to "Programs and features", but it keeps saying "another version of the program appear to be installed on this computer. I already tried to uninstall will "run, then type"regedit"or"regedit32"and taken the steps it is to uninstall it.» But it always happens in "Programs and features" and still wont let me uninstall it. Any ideas how can I uninstall the program?
What program? See if you can uninstall it with this tool.Revo Uninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html"Another version of the program appear to be installed on this computer.It's something you see usually when you try to install a program, not uninstall. -
I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall
Moving to the cloud creative download & install
Hello
Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Kind regards
Sheena
-
When I click on install to itunes, it goes very well until it will try to install it and then I get a weird error that the basis of this message is a win32 error. Then so I ignore this and itunes is able to be installed, but when I click on itunes, I get an Apple Application Support not found message! Eeek help someone!
Hello
1. What is the version of Windows installed on your computer? For example, Windows 7, Vista.
2. have you done any software or hardware changes on your computer before this problem?3. What is the full win32 error message you get when installing itunes?4 is specific to the program the issue?
Since we don't know the version of Windows installed on your computer, you can read the following general steps.
I suggest you to bring to the version of Windows installed on your computer so that we can better help you.
To work on the issue, refer to these methods.
Method 1:
Run the fixit from the link:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_UninstallMethod 2:
Refer to the steps from the link.Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926NOTE: after you complete the steps suggested in the section (4) Disabling other incompatible software), you must start the computer in normal mode using these steps.For the Windows XP computer:a. from the Start menu, click run. A run (command prompt) window appears.
b. type msconfig in the Open field , and then click OK. The utility of Configuration system opens.
c. click on the tab general.
d. Select the 'Normal startup' option.
e. restart the computer.For Windows 7/Vista:a. from the Start menu, click all programs click Accessories.
b. click run. A run (command prompt) window appears.
c. type msconfig in the Open field , and then click OK.
d. If Windows needs your permission to continue, click on continue. The utility of Configuration system opens.
e. click the general tab.
f. Select the 'Normal startup' option.
g. restart the computer.In addition, you can also ask your question in the Apple discussion forums.
https://discussions.Apple.com/community/iTunes
Hope the information is useful.
-
Hello
Maybe someone can help me?
Before you try this already found solution, I ask the questions, again, because of my OS and Itunes is not the same version as described in the solution mentioned down.After installing WIN10, I cleaned my system and made a big mistake!
I removed Apple Application Support (32 bit) and just kept Apple Application Support (64-bit)
-on a 64 bit system, my way of thinking was wrong--Now, I have NO error message, but itunes will be stuck to less still when I connect the iphone to the computer 6.
I try to avoid to uninstall itunes completely. (database large, with many playlists and all the songs with Board of the Album etc..)
Before him a. .m error itunes performed excellent.Is the fixed failure with which describes the solution, without any loss of performance?
Thanks in advance
https://discussions.Apple.com/thread/5867877
iTunes on a 64-bit system has 32 & 64-bit components.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
error message apple application support
not able to access itunes like error message indicating apple application support missing; tried to download programs that were relevant to my windows XP, but failed; What should I do to get apple downloads?
Uninstall iTunes, reboot and download and install the latest version.
https://discussions.Apple.com/thread/2327155?start=0&TSTART=0
-
system is not able to run the Apple Application Support service
I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?
Can you post the error message you get when you try to install or launch iTunes?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Hi guys,.
I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:
"An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.
In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.
Here are the pictures of the 2 filters:
Any help at all would be greatly appreciated.
Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.
Thanks for the attempt. Appreciate it.
Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
Right click the computer on the desktop or the Start Menu and choose Manage
The UAC prompt to enter a password if one is used, then click on continue or Yes.
If no password is used, click on continue.
Click the arrow next to Services and Applications
Click Services in the left frame
Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
If it is present, check under Startup Type to see if it has been disabled.
The default setting is manual.
At the top left will be a link to start the service
Click on it and see if the service can be started.If the installer of Modules of Windows is disabled, right click on it and choose Properties .
Set the startup type to Manual , click on apply, OK.
Close the computer management console.If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
Contact MS Support free of charge.
Start here
Make a mark next to "I use it for my own personal use.
Now click on the button continue.
Click on the I accept"" button.
Support options will be displayed. The only option I see here is for email support.
Click on the button continue to access the support request form.
Fill in the fields and then click on the button continue.MowGreen Services consumer safety update
-
Quick Time Player says install Apple Application Support, how to do?
Original title: How to install Apple Application Support Support?. This contextual information of Quick Time Player
Quick Time Player opens a Pop up note saying that I nned install Apple Application Support in my Vista desktop to open the photos sent by e-mail.
can how I find and install this Apple...?
Moved from Vista to install, upgrade and activate Forum.
IGM
Re-install quicktime should fix this.
Maybe you are looking for
-
Invalid SIM on the iPhone to Verizon unlocked replacement
I had an iPhone 6s recently, but lately I cracked the screen, and when I went to Apple Store, they have kindly provided a new phone replacement rather than a replacement of the screen because, they said, replacements of the screen for the s 6 was not
-
One or more programs recently downloaded on my desktop computer, an HP Pavilion 764 X running 32-bit Windows XP Operating Sytem, revealed that I need more RAM. After review, it appears that my computer has 512 MB of RAM, with a 1 open extra slot to
-
I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver
-
WiFi is connected but I can't connect to the net, what to do?
WiFi is connected but I can't connect to the net, what to do?
-
How to read a table of product download?
If you generate a table of product on the supplier portal site download, what exactly counts as a "Download"? Only new customers, or re - installs also or even updates?