Why can't I go wireless?

Similar Questions

• Why can't I update my Airport extreme Firmware?

  Why can I update my Airport Extreme 802.11n (3rd generation) Firmware?

  He keeps asking me to put in my password once I've done without end.

  If I forgot the right one, where can I find the right pair?

  Keychain Access (password of the show) is without help. It is to show that it took me several times!

  Thank you for your time and patience,

  W.W.

  Unfortunately, your message you can think that you only have a single password for AirPort Extreme, when you have two, and maybe three.

  (1) wireless network Password... used to connect wireless devices to your wireless network

  (2) basic password Station... a device password used to access the settings in AirPort Extreme AirPort utility so that you can make changes to the configuration of the airport and install the new firmware updates

  (3) disk password... an option that can be configured to require that a password can be entered to access the data on a hard drive connected to the AirPort Extreme. Most users use the password for the Base Station for this.

  You think maybe the wireless password when enter you the AirPort Utility?  If you are, you must enter the password for the Base Station. If you forgot, you can recover it from keychain access, everything as you got the password wireless.  Looking for a list of AirPort Base Station password.

• Why can't I print receipts or images and coupons?

  I have the HP Pavilion HPE 180 t with Windows 7 and my HP Officejet 6000 wireless printer. Why can I not print things like recipes or the coupons and others? I get error messages saying: an error has occurred in the script on this page and there is no connection to the ID of the connection.

  Yes, thank you!  Usually, it works to save it and then print it. Sometimes not. I'm talking about the promo that Qdoba e-mail which was good for today only. When I tried to save it, that part of it would save and therefore did not work. Your solution works and thank you, but it passes through additional difficulties that I wouldn't do. I'll check the rest of your response, thank you kindly, Cliff

• Satellite A100-529: How can I enable the wireless network adapter

  Hi all!

  I'm new here, but I want to know how can I activate the wireless network device. On my Toshiba Satellite A100-529 keyboard is a Fn key that must be pressed with the F8 key to turn on the wireless network device. I did, but it does not work.

  What can I do to turn on my wireless device?
  Thank you!

  You are right. The FN + F8 key combination should be used to switch to the WLan card.

  But look, man. Have you checked if your laptop supports wireless network card?
  I think it does not support the minPCI wireless network card and the card does not exist!

  That's why the WLan card cannot be activated :) you know ;)

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• Why can I not see distinctive numbers or letters?

  Why can I not see distinctive numbers or letters? My father the Dell Demension B110 computer, use Windows XP Professinal. We are unable to type in letters or numbers in all. When we try, the windows seem to jump around the place to place on the same window or a new window.

  I tried on internet and its processing, no letter or numbers or digits to see everything of the kind.

  Hello

  ·         Are you using wired or wireless keyboard?

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         You have this problem with all the application or specific application?

  I suggest you follow the steps mentioned below:

  Method 1:

  Open the keyboard of the screen and check if the problem persists, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard

  Method 2:

  If her above fails step follow these steps and check if the problem persists, follow the steps described in the following link:

  http://support.Microsoft.com/kb/258826

  Note: above article applies to Windows XP as well.

  Also update the chipset drivers and other drivers website device manufacturers.

  Note: changes to the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

• How can I protect my wireless internet from other users?

  I have a wireless internet connection, but my roommates keep access and I get not at any speed... so is it possible that I can protect my Internet access by other users? HELP PLZ!

  Thank you

  LL.

  Hello

  You can secure your network by using a security key.

  See the following links:

  "Set up a security key for a wireless network": http://windows.microsoft.com/en-US/windows-vista/Set-up-a-security-key-for-a-wireless-network

  "How will I know if a wireless network is secure?": http://windows.microsoft.com/en-US/windows-vista/How-do-I-know-if-a-wireless-network-is-secure

  "Why should I secure my wireless network?": http://windows.microsoft.com/en-US/windows-vista/Why-should-I-secure-my-wireless-network

  "Securing your network more ': http://windows.microsoft.com/en-US/windows-vista/Making-your-network-more-secure

• Why can't I connect to my homegroup?

  I'm on an HP laptop and I am able to connect to the internet through a router... wireless my PC (HP too) is directly connected to the same router.  I've set up homegroup on my PC and when I try to get on my cell phone, that it is said that he cannot do... I made my own password so I know it's true... my laptop can also see the Group residential b/c, it says I can join... so I'm missing something here... I disabled my firewall and tried, but still does not... I am running windows 7 pro (64) on both computers.
  Thank you

  Hi kceezie. Here is some info that might help:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Thank you
  Gloria Boyer

• Can only connect to wireless technology in some places far from the router

  My laptop, a Samsung with Windows 7, only connects to the internet in my room by the window.  The router is located in another room, but it doesn't connect when I am near him.  It shows that I am connected to the network, but I can't connect.

  Hello

  1. What's happening while you're trying to connect?

  2. you get any error message? If Yes, what is the full error message?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Follow the steps in the following article and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, please see the links and check if it helps.

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

  Troubleshoot low wireless signal quality (applies to Windows 7 as well)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Why can't connect to a website

  Until a few days ago, I could access internet sites with my 7 month old HP-Compaq Mini CQ10-800 with Intel Atom N455 @1.66/1.67 GHz CPU and 1 GB of memory. But now the browser installed on my computer (IE 9, 11.0 of Mozilla Firefox, Google Chrome, 21.0.1180.60) cannot access any http:// address, of the same modem http://192.168.1.1, but Skype works fine, Avast AV update, Windows updates work very well.

  So, what could be the problem? How can I get rid of this problem?
  Thanks in advance.

  Hello

  1. you get any error message?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Follow the steps in the link.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2:

  Follow the steps in the link.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems (Also applies to Windows 7)

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

• Why can't I just run netsh wlan show drivers on my windows desktop 8?

  Original title: on wify

  Why can't I just run netsh wlan show drivers on my windows desktop 8?

  Hello

  Please answer a few questions to refine the question.

  1 are logged as administrator? What exactly is the problem you are having?

  2. what happens when you enter the command?

  3. do you receive any error messages?

  Make sure that autoconfiguration WLAN service is started in the Services. Otherwise, you can start the service and check the results.

  Autoconfiguration WLAN service is a service which configures wireless connectivity and security settings.

  a. press the Windows key + R and type "services.msc" and press ENTER.

  b. in the details pane, under name, access the autoconfiguration WLAN Service.

  c. right-click the autoconfiguration WLAN Serviceand click Propertiesand then click the general tab, do the following:

  d. in Startup type, select Automatic.

  e. the Service status, click Start.

  f. click OK and check the status.

  Hope this information helps. Provide more information so that we can help you.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Why can I never get a good picture on my imac when using Skype?

  Why can I never get a good picture on my imac when using Skype?

  I use the free Skype to talk to my friend in China every week. They always see me on their computer or phone clearly, but I can never get a good video of them, clues why? I see a good image of myself, but never of them. I can't adjust the settings of the built-in camera because they are fixed. Is this my router modem, which is 8 years old now. What is causing this problem. If you look on YouTube there are hundreds and thousands of good quality webcam videos then why am I having this eternal problem year after year? I've got El Capitan OSX

  If they can see you clearly, the problem is not on your side - at least not in your Mac. Could be the router or you internet connection. Otherwise: https://support.skype.com/en/skype/mac/

• Why can't Photos read my sandisk sd card, but no viewfinder?

  I have a lot of cameras, and when I plug in my sandisk sd cards in my computer, I can always browse clips in the finder, except when I record the images of my panasonic ag-ac90 which shows nothing in the DCIM folder. Why is this?  I can view in newspapers and photos and transfer images in Final Cut, but why can't I see my images directly on my sd cards when I use this camera?  What is a camera problem or mac?  If anyone has an answer, I would be very happy.

  Thank you

  Ryan

  I guess the problem is with the way the cards are in the format. You should try to access cards with Capture of Image utility in the Applications folder.

• Why can't edit my contacts to search with the new ios 10.0.1

  Why can't edit my contacts to search with the new ios 10.0.1

  It seems they have changed the way search works after the update. You can always edit contacts by opening the Contacts app, then open the contact you want to change. We do not know why they made the change, but unfortunately it is out of our reach. I don't know that they had a reason for this. If this is not the case, they will probably patch in an another mini update.