Why css tabs suddenly absent of my FF pages?

Similar Questions

• Why the tab being changed to the "master page" still in Active state when I'm selecting other tabs?

  I am trying to create a mobile site base with muse of adobe. I created a page with tabs panels using the tab panel widget and each tab a link to its respective pages. Let's call my tabs 1, 2 and 3. the links are fine, but whenever I chose 2 or 3, tab 1 will be also in the active state. the selected tab is a reference to the tab being changed to the 'master' page, that is to say, if I'm editing tab 2 on 'master' page, tab 2 will always be active when I select tab 1 or 3.

  I don't need this kind of confusion. can anyone help?

  I use adobe CC. Thank you!

  Hello

  This is an expected behavior of the Panel tabs. When you add a master page tabs Panel by default, one of the tabs is active. So every time you loaded the page, any tab that you had selected in the master page always will be active as well as the other tab that you used as a link.

  I suggest you use a Menu widget or widget from composition to avoid this.

  Kind regards

  Rohit Nair

• Menu and toolbars, tabs suddenly LARGE, need to reset Firefox, not fixed by eliminating add-ins, only a reset works - help!

  Menu and toolbars, tabs suddenly LARGE, need to reset Firefox, not fixed by eliminating add-ins, only a reset works - help!

  Are you sure that this has not been caused by the Tab Mix Plus?

  Your list of details of the system shows a lot of disabled people with only active TMP extension.

  Have you checked for code in userChrome.css if you use this file to customize the user interface?

  • http://KB.mozillazine.org/Editing_configuration

  In the Firefox Safe mode, these changes are effective:

  • all extensions are disabled (subject: addons)
  • Default theme is used (no persona)
  • userChrome.css and userContent.css are ignored (chrome in the profile folder file)
  • default toolbars is used
  • JIT JavaScript compilers are disabled
  • hardware acceleration is turned off (Options > Advanced Options > general)
  • plugins are not affected
  • preferences are not affected

• Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Method #1

  Start button > in the search box, type options records > press the Enter key > click on view tab > under files and folders, uncheck "Always show icons, never thumbnails" > OK

  Method #2
   
  Start button > Control Panel > Classic view > systems > left column, system settings advanced > Performance tab, click on settings > tab Visual effects, click 'Show thumbnails instead of icons' > OK

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• CSS's sudden lack of project manager (RH10)

  Suddenly, my main css (named "Sol8.css) is not appear in the project... Manager it shows everywhere else, but it... See picture attached. I have no idea why this is suddenly the case.  I would like to be able to access them for editing in the HTML editor in RoboHelp 10... That's happened?

  Help! and thank you...

  

  In fact, you might find that the removal of PCD is originally the css file to disappear. (I've seen it affect some (but not all) of the images as well and has been a major cause of my last job passed to Madcap Flare.)

  Try this:

  (NOTE: If this is a very large project, you may go out for coffee or lunch.) Basically, this will refresh the HR list database file (my interpretation), which can take a long time for large projects. We had one that took an hour).

  1. Create a new folder. It can be anywhere and whatever it is called, and you can remove it in an instant.
  2. Check if your css file appears in the project again Manager.
  3. Delete the new folder that you just created.

  If it works, you will need to create and delete a file when you want to change the style sheet, after deleting the cpd (or just use windows Explorer and an external editor).

  Please also report as a bug to Adobe. I did a few times, but most of the people look at me like I'm crazy. Which reminds me, I should report it to new and link to this topic.

  If this does not work, sorry, I'm ideas.

  (Edit: Bug submitted with link to this thread and also https://forums.adobe.com/message/3478909)

• Why open a new page in the tab as well as my home page?

  When I go online, I expect to have only my open home page, instead, I have two tabs, my home page tab and the tab and the new tab is the page that actually opens. This just started yesterday, why?

  Have you checked the home page setting to ensure that it is always correct?

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  You can check the target line in the shortcut to the Firefox desktop (right click: properties) to make sure that nothing is added after the path to the Firefox program.

  You can check for problems with preferences.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site IM on?

  Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
  I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Why is firefox suddenly denied access to reliable sites, calling it "unreliable"?

  My husband used a reliable medical site for years... suddenly the message came "untrusted site". We contacted the site - they we connected to their tech support - he tried everything with us by telephone (cleaning cookies, download the latest version of firefox), but the only way to solve it was to give firefox the go-ahead to ignore their warning. Then, we got the site. Today, the same message popped up on another site that he uses regularly. Any ideas why this happens suddenly on sites reliable, used successfully for years?

  STOP THE PRESSES! I finally found the windows update - it turned out that the date and time on my computer were not sync (we had a power failure, a few days ago that must have triggered it!). Thank you very much!

  freebie

• Why do I suddenly had a .qif with bank transaction file appear on my desktop!

  Why do I suddenly had a .qif with bank transaction file appear on my desktop today that were not there when I turned it off last night

  Hello

  1. have you made changes on the computer before this problem?

  2 are you able to open these files before, have you seen this message before popup on your computer?

  3. is there someone else your computer?

   

  The. QIF file is and ASCII text file. While you can view and edit the file in any text editor, be very careful as the format of the file and the order of the items in the file are essential for the proper execution of the file.

  NOTE : If the files are reappears or multiply on its own, so I recommend you to run the Microsoft Safety Scanner to remove all viruses in the computer that could create this file. Viruses are known to come. QIF file format. I suggest you to not open files if you are not sure about this and rather wait for the Microsoft Safety Scanner complete to ensure that it is not virus. Once the analysis is complete and the threat of virus cleared so you can view the file. If you think that the file is not linked, then you can remove the same.

  Run the Microsoft Safety Scanner and check if that helps resolve the issue.
  
  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note : the data files that are infected can be cleaned by removing the file completely, which means there is a risk of data loss

  Also try to perform a clean boot and check.

  How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual

• Turn off the CSS tab in the specifications

  
  Hello

  We have not implemented module CSS, but we use the equivalent field in the summary page. Is there a setting that I can use to turn off the CSS tab in all modules GSM, without affecting or deactivation of the equivalent area or the data it contains.

  If so let me know, how to do it.

  Kind regards
  Kumar

  If he hides the tab for all types of spec except formulation so this looks like a bug, go ahead and submit an SR.  You should be able to use the extensibility of the user interface to work around the problem until it is fixed.

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  darlagore,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

• Why people have suddenly begun to report their entire question in the place that is intended for a brief description of the problem.  Is there something inherently wrong with the new format of format?

  ... Only to repeat it once again here.

  Why people have suddenly begun to report their entire question in the place that is intended for a brief description of the problem.  Is there something inherently wrong with the new format of format?

  Ahhh, now I see.

  The man, who is just really, really bad design forum.

  I know that it will hurt, Adobe, but you will be away to Jive at a given time.  You're going to have to, as Jive moves further and further away from the ease of use.  So... Dick.22 now, or le.45 later.

• Why dreamweaver wants to replace my existing css file when you create a new page

  I created a Web site and I can not dreamweaver to accept my existing css file when I create a new page in the same Web site.  I click on file, create new page, I select page fluid and in the lower right, click on the link to an existing css file and click ok, but dreamweaver tells me so my css file does not exist and wants to replace my existing css file? What's happening?

  Thank you guys for this report we

  It's a little surprising that it is the way it is for a while now. Rather than create a fg with the attached css html, DW invites you to create a new css / replace the existing one. Why?

  The part confusing here is that the "css Attach leader"offers two options.

  1. fix like a normal CSS

  2. attach like a css FG

  If you check the preference to "Join as fluid grid CSS" (see attachment) you should not see this question.

  

  that is, unless you attach the css like a css FG, DW treats like any other css and waiting for you to bind one another css FG

  However, I'm too confused at first until I realized the difference. Hope this helps

  And thank you for bringing this to our notice

  .. Henin :)

• Why Yahoo is suddenly my homepage?

  Hi, all of a sudden, Yahoo is my home page, please see the attachment. I think that it start today after update to the worm. 40.
  But this is not the first time that this has happened and it is very annoying. I have google as search engine and I use it on: newtab homepage normally.
  What can I do to recover my home page and get rid of Yahoo for good.

  I looks a lot like Firefox but not with Yahoo as searchengine.

  B.R.
  Captor

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
  More information (including how to remove it) can be found in the article troubleshooting Firefox problems caused by malware .

  In some cases, the malware is delivered with other applications that seem harmless or even trustworthy. Especially if an application is provided as freeware, it is likely that it comes with adware hidden, browser hijackers or other types of malware. The best practice to prevent this malware to be installed on your computer in the first place is to always choose "custom installation", "I'm an expert", etc. during the installation as here.