Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

Advertisement

Hi Sdaugherty3,

Follow the methods below:

Method 1: Try to change the resolution of the screen and check the results.

 

To change your screen resolution

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

 

Resources for troubleshooting problems in Windows XP

http://support.Microsoft.com/kb/307960

I hope this helps.

Tags: Windows

Similar Questions

  • How can I leave my desktop screen and go to the screen where I can click on the icons to go to the websites I want?

    How can I leave my desktop screen and go to the screen where I can click on the icons to go to the websites I want?

    Hello

    Please, move your cursor to the bottom left. You will see a small photo with the screen full of apps, then click on that and you will be taken to this screen,
    It will be useful.
    Josh.
  • Panels and toolbar not displayed upwards at the opening of the files.

    I just started using Photoshop yesterday, and when I started opening new files there would be a toolbar on the left side and 3 panels to the right. After the opening of these same files today, the toolbar on the left has disappeared and there is only a single panel that says "libraries." In addition, it is only let me zoom in and out of the picture. I figured out how to fix it by going to window > > > Workspace > > > Essentials, but why start doing unexpectedly and how to reset so I have always not to adjust it manually.

    Hi cameronp,

    Please follow the steps below to disable the workspace of beginning

    1. Select Preferences > General.
    2. Deselect Show Start Workspace when no document is open.
    3. Restart Photoshop and verify that the problem.

    Let me know if it helps.

    ~ UL

  • Display moved to the right

    The other day when I turned on my computer the display on the screen to the right of the past about an inch.

    I tried many things, reboot, reset the screen, move the screen to the left (he only moved it roughly halfway back), update drivers, drivers of removal and re - install.  The monitor is an HP W2371d.

    When I change the resolution of 1920 X 1080, 1600 X 900 screen centers correctly.  It works but it's boring because the image is grainy.  Does anyone know what is the problem?

    Anthony

    Hello, Anthony_1993

    It sounds like you are having problems with the VGA of the computer infrastructure

    (card mother resident in video card), or with implementation of DDC monitor (it is noted that I sometimes saw strange problems as this caused by bad connections internal cable VGA the monitor itself, usually at the greenhouse at both ends).  If using Factory Reset does not cure it, you could try enabling / disabling DDC/CI on support & out (in the OSD menu; the icon is a rectangular box more or less with "SDC" inside, the factory default is for this parameter in order to be 'on').

  • LabelField is not displayed when, to the right of an EditField or ButtonField

    When I add a LabelField to the right of an EditField in a HorizontalFieldManager, it does not appear.  What follows is a subset of my program.  LabelField lblTdbUnits does not at all appear, when, after an EditField.  Y at - it a setting that I have to give the EditField to prevent it from hogging all the spaces in the line?  I tried to set the maximum size, but it does not help.

    I'm testing with the 8310 only Simulator.

    SerializableAttribute public class MyScreen extends form {}

    public static ButtonField btnCalc;

    public static LabelField lblTdbText;
    public static EditField editTdbVal.
    public static LabelField lblTdbUnits;

    public static HorizontalFieldManager _fieldManager1;

    public MyScreen() {}
    Super(); constructor of the parent component

    addScreenItems(); Adding visual elements to the screen
    }

    public void addScreenItems() {}

    _fieldManager1 = new HorizontalFieldManager();

    ButtonField
    btnCalc = new ButtonField ("Calc");
           
    lblTdbText = new LabelField ("Tdb =");
    editTdbVal = new EditField("","96",2,EDITABLE);
    lblTdbUnits = new LabelField ("deg F");
           
           
    Add (_fieldManager1);
            
           
    _fieldManager1.Add (lblTdbText);
    _fieldManager1.Add (editTdbVal);
    _fieldManager1.Add (lblTdbUnits);  / / Do not display this label

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>

    I also tried to have a display of the button field to the right of a field to edit, but that also does not work:

    _fieldManager1.Add (lblTdbText);
    _fieldManager1.Add (editTdbVal);
    _fieldManager1.Add (btnCalc);  / / This button does not appear

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>

    Any ideas?

    Thank you, b.

    The following Threads must explain what is happening here and give you example of code that will help you overcome the problem:

    http://supportforums.BlackBerry.com/T5/Java-development/BasicEditFields-won-t-show-up-in-HorizontalF...

    http://supportforums.BlackBerry.com/T5/Java-development/custom-field/m-p/392585#M76156

    Edit: I don't think that LabelField is default USE_ALL_WIDTH.

  • Lightroom 3.4 do not display images in the right color.

    After you import the files from my camera, the photos are shown in the right color.

    I have a 600 d from Canon and Windows 7 Professional 32 bit. Here is a photo from Lightroom 3.4 and the Original:testshot1.jpg

    Testshot.jpg

    My problem is how to change settings in Lightroom to get the colors right.

    Thank you for helping me.

    Jens

    The histogram of your image

    shows that the problem is with the calibration of your screen. The profile in use is corrupted. Delete it and re calibrate. The areas where the three channels are present in the image should show as gray with a no profile corrupt... so

    and on some other responses here, LR doesn't use ProPhoto as is the internal colour space (it uses its own which is based on ProPhoto). The color space, that the image will not affect how an image is displayed on one screen correctly calibrated, other that on a screen wide gamut more space will be available. With a calibrated monitor images will reproduce the same thing in any application of color run as they will be considered in your monitor profile. To see the variances created by different profiles or spaces you test a file PS or other applications capable of never.

  • HP envy 5530 Wireless: print only on the left excluded from the page. The right part shows a gray rectangle. Preview looks right

    My new printer works, but although I've marked the parameters for the letter and print preview appears correct, that the printed pages are coming on only the left excluded from the page.  On the right 1/3, there is a gray rectangle.  I really need to fix.

    Thanks again for your response.  It turned out that the printer was not to blame.  I was using the word 2016 and he had a setting of markup that was running.  When I turned is disabled, gray Panel went out.  Unfortunately, he seems to be the default setting and returned.  But until I figure out how to fix I just check the section of markup on the Ribbon and make sure it is off.

  • down and to the right only show positioning...

    Hello

    I use the police great for getting the 'down' arrow to the right of my page.

    When 'right' and 'bottom' are set to 0, it displayed during the test. However, I find them too close to the edges. I wanted a distance of 30px for both parameters. However, when I test that my arrow disappears completely. Odd.
    Why it would not work when set like this? -Even when I try these same attributes on the W3 school, the fictitious example gives the result I want to achieve. Please inform me as to what is wrong with that?

    {scrollToTop}

    margin: 0;

    position: fixed;

    background: 30;

    right: 30;

    Width: 70px;

    height: 70px;

    z-index: 100;

    display: none;

    text-decoration: none;

    color: rgba (125, 61, 28, 0.5);

    background-image: none;

    }

    Thank you.

    30px not 30

  • Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

    Original title: suddenly Windows XP does not open

    After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

    Hi Brian,.

    1. you receive messages or error codes?

    2. did you of recent changes on the system?

    You can read the following article and check if it helps.

    Computer stops responding with a black screen when you start Windows XP

    Black screen on startup

    Hope this information is useful.

  • If I buy a new desktop computer is it advisable to also buy a new monitor, keyboard and speakers?

    I need to buy a new desktop computer.    It is advisable to also buy a new monitor, keyboard and speakers?

    Thanks for any help or you can give me advice.

    From Internet Explorer

    Original title: new PC

    Really, not including the cost of the actual, implementation components who sometimes comes with the purchase, according to the retailer.  But to have install for you and do some professional courtesy as drivers or additional software, implementation of printing/scanning of the defaults and simply defining overall... which is a service I offer (locally in my community) for an appointment $ 60.

  • left side ctrl key, ESC, f1 and f3 keys stop working all of a sudden.

    Hello

    I have a problem, I have laptop Sony vaio SVE15114FXS and since before yesterday my laptop on the left side ctrl keys key, ESC, f1 and f3 stop working all of a sudden, I tried a lot of things to understand tht y the problem give but without no result found. I restored my laptop and reinstall the keyboard drivers too for this problem, but still its giving me same problem, please help me and make me this problem.

    shereenkhanzada,

    If you mean restore as in a factory restore and the keys are still does not the device will require repairs.  If it is a model of the United States please call for Sony Support @ 800-222-7669 so they can trouble shoot and set up for service if required...

  • I just reinstalled PE10 and the Panel on the right that shows the layers in edit mode disappeared.  How to get him back?

    How can I get the sign on the right that allows you to work with layers appear in edit mode?

    Migrate on your user documents and settings? If so, you must delete the preferences:

    http://barbarabrundage.com/2014/10/17/a-reminder-for-Mac-folks-upgrading-to-Yosemite/

    and since you've tried to use it, anything related to PES in the folder of the saved state of the Application, which is also in your username > library at the same level as the Preferences folder.

  • I have a desktop computer with a blank screen except around 1/4 city on the left side is normal, peak, icons and everything.

    Changed the image of the office.

    The amazing Microsoft MVP Doug Knox wrote a fix for this.

    Remove common tasks of the Office:
    http://www.dougknox.com/XP/scripts_desc/xp_commtask_desktop.htm
    © Doug Knox - 04/5/2003 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • Show the top of whole desktop screen and individual screens

    Change text size

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

    Make the text on the screen larger or smaller

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not fix it:

    Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    Then:

    http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    See you soon.

    Mick Murphy - Microsoft partner

  • Nothing display upward in the main viewport CS6 (64-bit) - PC

    I can open Photoshop very well, all buttons work. I see everything I do in the thumbnail preview of the layer, but all I see on the main screen of design is the background "transparent." The slider appears and looks the part of what brush I use, but nothing happens on the main screen. I don't even have the ability to use this version yet because I don't see anything! Help, please!

    This is the general direction I was headed with the OpenGL (OpenCL in your case), but it was slow catching on, until I found this other thread.

    Good luck

    Hunt

Maybe you are looking for


HashFlare