Why did I have performance issues when you add dangle (making the whole slow)?

Similar Questions

• Performance issues after you add pictures to the library

  Howdy,

  I am still getting my feet wet with LR2.5 and so far I really like it. It's absolutely great for my workflow.

  Previously, my library consisted of about 1500 images, and using the mode developing has been super fast with the adjustment brush and Gradient of the adjustment. I would click on a RAW image that I had modified, and it would be the load almost instantly. Over the weekend, I added about 30,000 files in my library of LR2.5 and noticed that help develop mode was suddenly slow dog. On film, I have to click on an image that I had already edited with the adjustment brush, and it would take 10 ~ 30 seconds to load. If I went to the next time on film using the arrow keys, it would take as long to load this image if I had worked on that. If I chose a picture I had not worked on, he would load in a second or two. However, if I started to use the adjustment brush, I'd get long waiting periods before my changes would be present. It got to the point where it became unbearable to work on images.

  To try to solve the problem, I restarted my iMac (2.8 GHz Intel Core 2 Duo, OS 10.6.1, 4 GB RAM, 1 TB of internal disk, 2.5 to external hard drives), optimized, has increased the size of the Cache of 1 GB to 5 GB, but none of this makes much difference. In the end, I removed the 30 000 images that I had added, and all was well again. I know that LR2.5 can manage hundreds of thousands of photos easily, then why am I having problems with it? I wish I could add all my images to the library. Are there settings I should change to improve performance?

  Thank you for your time and answers.

  The f

  It's this stupid forum moronically software. who eats the answers by e-mail.

  Yes - Look under the menu LIBRARY. I'm not in front of my right to LR

  now, but there should be an option on the topic "OVERVIEWS". one

  suboption must "RENDER". Select all THE PHOTOS and choose

  LIBRARY, previews, RENDER (or similar wording).

• Performance issues when you build a large crossroads

  Hello
  
  I have a performance issues when you build a large crossroads.
  
  So here's my situation:
  
  We use Discoverer Plus 10.1.2.45.46c
  Database Oracle 9.2.0.6 on Windows 2003
  OAS 10.1.0.3
  1.5 GB of RAM on my PC
  
  -J' planned a workbook with 1 single worksheet that takes 2 minutes to run. The table generated in the database to store the results from 19 columns and rows to about 225000 (I know that's a lot, but it is what the customer needs).
  
  -When I opened the workbook, it takes about 2 hours to recover the data. The data is retrieved in groups of 1000 and at the beginning, the lines are read much faster than at the end. There are also 15 minutes more to build the crosstab. So overall, it takes 2 hours and 15 minutes for the crosstab display on my screen.
  
  Can someone explain to me:
  -Why does take so long?
  -What can I do to improve the execution other than changing the application or displaying the results in a regular tab? Is there some setting that I can do on the database of the Oracle Application Server?
  
  Note: I have reproduced the worksheet in a simple tab and demand it. The table generated in the DB to store the results is the same and it takes only 2-3 minutes to open this spreadsheet and extract all lines.
  
  
  Thank you!
  
  Mary

  Hi Mary
  If you have 225 000 lines in your basic spreadsheet, then it will take a lot of time to produce a crosstab. The reason is that Finder can not calculate how many buckets he needs until he has read all the data. I can almost guarantee that with 225 000 lines to read and manipulate that you are short of memory.

  You might be better suited someone create and populate a table with the results you need rather than try to get the discoverer to calculate values in crosstab on the fly. If the final result of the crosstab is a few lines of aggregated data, then this is what is right for your table. The advantage of using a table and a few SQL (or PL/SQL) is that you will not be using your local computer during the aggregation / sorting phase. Don't forget a crosstab also sort based on the values in the left columns, the columns you have aggregations (buckets) you will have and most necessary sort. Using a table, you can index or even partition the results that will make for a much faster recovery.

  As a tip, recommend Oracle, confirmed by myself during the exhaustive tests, no do not build large paintings to double entry due to the performance of touch that you will have. The tables are much more efficient because you can pull back x lines at once. You can't do that with a crosstab and all values must be read before that whatever it is is displayed.

  Does that help?
  Concerning
  Michael

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• When you add that bookmark the location menu does not appear.

  Firefox on Ubuntu 10.04 10.0.2 - when I add a bookmark the secondary menu (which allows to choose the location) does not appear. The bookmark is created in the bookmark main 'folder '. I can handle the bookmark after its creation, but it is not very effective.

  Any ideas how to fix this? Thanks in advance.

  Hello

  Please check if this happens in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• My footer will not dynamically move when you add content to the body.

  I built a model with my envelope header and footer protected as unchangeable. I applied the template to all pages except the index.html page. When I add content in the content body inside a div box there will be blood in the area of the film instead of pushing down. So my menu wrap and footer must move down that I dynamically add content. How can I solve this problem?

  I understand that if I use a regular div tag and not an APdiv tag, I added the content it will then push the footer down. Sorry I am new to Dreamweaver.

• Performance issues when you use HTML5-Articles

  Hello world

  We build an application where we use HTML5-sensitive inside objects.

  On older iOS Devices (iPad2 iPad4 for example) and the performance is so bad that it is not really usable. Take for example up to 15 seconds of opening an Article downloaded until it is fully restored.

  We have a lot of photos and videos inside but inside the browser OS, it works a lot better.

  Is there anyone who has had the same issues or any idea how to optimize performance (especially on older devices)?

  Thanks in advance and best regards!

  Lars

  Lars salvation,

  The control of the OS used to display content on iOS is a different rendering than the OS browser technology and has different performance characteristics. In particular, it is slower on older devices, such as the iPad 2.

  Based on your description my guess is that your image size is driving performance issues. Take a look at what size in pixels are your images and aggressively, re - compress. I had successful scaling of images to 50% of the size I think I need and then save them in JPEG format at a quality level of 7 (or even 5) in Photoshop.

  Regarding the videos, make sure that you use the

  Neil

• Performance issues when you use TimeWarp

  Hello

  I'm trying to understand why a CS6 updated AE to date is to have performance on a generation problems relatively high-end. I'm trying to use the time warp effect to make the scenes of idle but AE runs very slowly once that I was drag in a clip that its unusable.

  I were read stimulating performance article which shows how to increase the hard drive cache (I'm under it an SSD in passing) and adjust the amount of RAM and the number of cores is used, has no effect.

  Here is my card of build:

  CPU: i7 3770 k @ 4.2 Ghz

  RAM: 16 GB 1866 mhz Corsair Vengeance

  SSD

  GPU: 2 x GTX980

  OS: I tried it on Windows 8.1 and Windows 10 Technical Preview, no difference. Both fully implemented to date.

  I also tried the Cloud creative trial version to see if it gets better, here, it works more slowly.

  Any help or contribution is appreciated.

  It might be the film.  Things like AVCHD, mp4, h.264, and mpeg compression interframe - not every image has complete image information... just things that have changed from one image to the other.  If you mess with time use, AE must rebuild the incomplete frames first, and THEN it must mess with time.

  The fix - use a good intra-image codec.  I love quicktimes ProRes 422, Photo JPEG, PNG or animation.

• In the face of slow performance issues when you use Microsoft applications.

  Original title: The Office Windows and student 2010

  Windows is slow to opening any windows file (ms word, excel, windows live mail, etc.), and more when you type in one of these applications, there is a striking shift. I did all the diagnostics repair in programs and features, troubleshooting, disk cleanup, defragmentation, etc. I ' don't know what to do next. As I type this question, it is not a lag in typing. The striking shift happens in Microsoft products. The Internet Explorer search box works without a striking shift.

  Opening of MS word, excel, windows live mail is very slow. Once they open, typing accusing each other.

  Please let us know your problem is solved.

• Firefox Help my firefox top bar has been changed, I used to be able to get the file to bookmarks Format printed, and other services that I have found useful when you take information from the internet, where they went, I want them back?

  Firefox help

     Search
  

  "Found 0 results for" my firefox top bar has been changed, I used to be able to get the bookmarks printed Format file, and other services that I have found useful when taking information from the internet, I found bookmarks to the right of the new game to the top, but it seems not instantly friendly where they went, I want that they come back? »

  See:

  • https://support.Mozilla.org/en-us/KB/menu%20bar%20is%20missing

• WMP 11 crashes when you add media to the library from an external HARD drive

  WMP 11 problem!

  I have win XP and current run WMP 11, I try to add data to my library on an external HARD drive, the player begins to add and then crashes... I tried rebulding, clear memory cache and re - install the software... I also tried the HARD drive on another machine, and it worked fine... solutions?

  Hello

  ·         There the latest changes on the computer before the show?

  ·         Have you tried to connect the drive to a different USB port and check?

  Method 1:

  I suggest you try to install the hotfix from the link given and check if it helps:

  FIX: Windows Media Player 11 may stop responding when you transfer media to a device that uses the Media Transfer Protocol and then you cancel the transfer process

  http://support.Microsoft.com/kb/935552

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• Control the duration/length of the file when you add it to the composition

  Hello

  This was bugs me for a while and feel that there is probably an easy fix for this.

  When I drag and drop a file (image, video, etc.) in the project to the composition/timeline panel, AE automatically decides that the length of the file is that of the whole of the compositions. Much of the time I want this file to be only say 10 seconds long while the whole composition may be 60 years for a long time. I know that you can drag and drop the file into the current-time indicator, it will still be long in the 1960s in this case however. So I have to 'manually' cropping the length of the layer.

  Is there a shortcut keyboard or something you can do with markers to decide the length of the file/layer before/while drop you in the composition?

  I use CS6.

  Thank you!

  You can set the time always in import options in the preferences.

  Mylenium

• When you add points on the path with the pen tool, it will always add handles almost anything?

  I'm stumped... I have used several times before the tool pen without problem. I use Wacom Intuos... but have also disconnected and used touch pad and the same thing happens... I want to add a track with the tool point pen to move and create a perfect angle and no matter what I do the pen creates the point with handles and, of course, with handles, it becomes very difficult to create and move a corners with the direct Selection tool... It certainly could be Windows or some other internal force creating the problem... I have three versions of Photoshop installed on my Alienware... Photoshop 6, CC2014 and CC2015.5.1 and it happens in all versions of three... If I'm a fool for lack of something obvious please let me know... If it's something I'm missing or have forgotten that I'd appreciate any help I can get... Peace and thanks

  The default behavior is. I just hold down the alt/opt and then convert the point at a point without handles.

• Why did I lose image quality when you export a panoramic photo of the LR5 in jpeg format

  I started using cc LR5 and photoshop to stitch panoramic photos.  Started with 7 RAW files and got a good image in LR5 final.  When I export to jpeg to save the file or print it becomes a file 5 MB and not big enough for printing.  I set the 100% quality and also tried to limit the file size to 20 MB, but it seems to automatically compress the file.  Thank you.

  JPEG "file size" will be smaller because it uses a lossy compression. In the right panel Libray module under "metadata that you see for" Dimensions?.'"."