Why did I lose macros when you save the worksheet

Similar Questions

• Why DAQmx read 200714 error when you save the file?

  In particular vi that I created, I have 3 analog inputs coming in and are graphically represented.  If I choose to save the information to a file, a dialog box appears and I can choose what to save it under.  If I take too long to save the file (aka about 8-10 seconds if the sample read rate is 500/s) then I get this error once the file has been saved:

  Error-200714 occurred at .vi DAQmx Read (analog 1-d NChan DBL 1Samp)
  Possible reasons:
  Acquisition stopped because the driver could not transfer the data from the device to the computer's memory rather quickly. This was due to limitations of the computer system.
  Reduce your sample clock rate, the number of channels in the task, or the number of programs on your computer that is running simultaneously.

  Why the DAQmx bed vi I have this problem when the vi has been idle for 10 seconds then I choose where to save the file?  How can I fix this error?

  Hi child of pre-school age,

  I think your error might be caused by the read buffer overflow. my suggestions for you would be to either the following four ideas:

  1. stop the acquisition before writing the file. This should mean that the DAQmx Read function will no longer be reading and therefore does not generate an error.

  2. If you still want to read the data but also write data as well, I think you'd be best suited for use live TDMS. TDMS allows the user to stream to a reading of filewhilst.

  3. the configuration backup dialog box file before starting the acquisition. Download the user to enter all data in the file before you start to acquire.

  4. change the buffer to unlimited so that you have enough time to navigate the record window.

  If you send your VI I can advise others

  Let me know how you go,

• When you save the files, it also gives the ability to save to Invu.

  Original title: modifying the file save options

  I use Invu to watch the old images.  I no longer use it for the new scans.  When you save the files, it gives me the option to save in the normal file type such as Word, Excel etc.  It also gives the ability to save to Invu.  How can I get rid of this option without uninstalling Invu?

  Hi EmRaggy,

  It is not possible. When you set the file, it will display all related programs to open the files installed on the computer.

• BlackBerry signing key IO exception when you save the new key to the file

  I have blackberry signing key IO exception when you save the new key file when trying to get my keys. I read the other post - I do not use Windows Vista and JDE component package is installed on my machine. What now?

  It was a windows 7 resolved permission problem

• Implementation for the Apps Error signature: "ioexception when you save the new key pair".

  I'm following the instructions of setting up registration your apps: https://developer.blackberry.com/html5/documentation/signing_setup_smartphone_apps_1920010_11.html.

  After typing the password and move the mouse around, I get a message, "ioexception when you save the new key pair". BB forums say that the problem is that my JDE is not installed, but it is. I'm also not using windows 7. Does anyone know how to fix this?

  As for all my messages, within the hour to ask, I always find the solution.

  http://ekkescorner.wordpress.com/blog-series/blackberrydev/secure-development-of-blackberry-applicat....

  However, it is normal that the instructions on the page webworks lack incredibly. I went with anger poster yesterday on the development of how awful all for blackberry is, and how absurd it is that there is no phone tech support. I decided yesterday against him because I felt bad for RIM as they seem to get into financial trouble. I've been on the fence about BB, and I tried to tell my friends that the newest smartphone looks like it could be promising. While it is true, I have not developed for BB 10 again, if it's developers resources also lack 7 are, I have no doubt that soon she will fail and I will give is more no support.

• When you save the file GIF grace to save for Web how can I save the original?

  Hello.

  When you save the file GIF grace to save for Web how can I save the original?

  I need the original and not optimized.  Help, please

  ilyag58620179 wrote:

  But I need to GiF animation file

  And by definition, a GIF image is optimized! A GIF is not the same size of the PSD file, and you are mistaken in thinking that you want it to be. If you are trying to achieve the slightest loss of quality, regardless of the size of the file, then you need to adjust your settings to save for Web.

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• Is it possible when you save the psd file to put an automatic jpg file saved at the same time?

  My job is to prepare images for print viewers and window facilities.  My clients need to approve in advance the photos before printing.

  I generally save my psd files, but because the files are very large in this format I usually save another copy in a jpg file which has a much smaller file size.  This makes it possible for me to add to a presentation and and send them to my client.

  Is possible when you save the psd file to put an automatic jpg file saved at the same time?  Or that I always have to do it manually?

  Use the Image Processor in Photoshop or install the free Dr. Brown Services.

• When you save the Photoshop elements 11 catalogue, which is saved exactly?

  When you save the catalog, which is saved exactly?

  Title of the message was edited by: Brett N

  Rolf - Jürgen wrote:

  When you save the catalog, which is saved exactly?

  Two things:

  -all your images

  -your catalog (the database and its associated files like caches)

  The catalog is physically located in its own folder; You can find its location in the menu help/information system.

• CS6 Pshop - alerts at startup; "All readable Documents" do not failing at opening; Format of file name not identical to the list of Format when you save the file

  Just downloaded CS6 Design Standard. System - OS10.6.8 (about to upgrade to 10.8), iMac 27 i5Intel 4core 12GBram clocked at 2.66 Ghz

  Pshop opens, I get three alerts...

  1 - Unable to load module e/s asynchronous activate because does not work with this version of Photoshop

  2. impossible to load the multiprocessor support plug-in because does not work with this version of Photoshop

  3. unable to load the module of FastCore Routines because does not work with this version of Photoshop

  Then asks if I want to be connected to the internet or something like that. Then Pshop opens before even I click OK

  None of them arrived with CS5.5

  I realize that CS6 is 64-bit. I have fixed 32-bit because of the CS5.5 plugins.

  Two questions, I've noticed so far with CS6.

  1. that I open a document, the Enable selection drop down at the bottom of the window is not set to anything. I always selects the Documents readable by all. Not the case in CS5.5, who was always default readable to all documents. Could not find anything in the Prefs to this question.

  2. When you save a document, RGB or CMYK, the drop-size selection are not accurate. The first three or four read properly correlated with the suffix (.jpg, .tif, etc.) in the name of the file at the top of the window. But then the selections later format below one third or fourth read than above the list.

  for example: as a RGB file: economy through BMP indicates even in filename above (.bmp). However, the following below that, Gif, choice still shows as .bmp in filename at the top. And so on down the list. Even with the CMYK file.

  Never seen this in CS5.5.

  When I initially installed CS6, I noticed that only items in the Plugins folder was folder Panels... without other plugins. I thought this to be an error in download of some sort and moved 5.5 database plugins to 6 Plugins folder. Could be the problem? Otherwise, I would have SOME plugins in CS6

  I downloaded CS6 think twice now first has been altered. I used two download options on the Adobe - Akamai and standard page

  Same questions at once. One country replied this to be a problem of plugins. I uninstalled 'after market' 5.5 and 6 SuperBladePro plugins was the only one. CS6 restarted. Still the same problem. Only the elements of Plugins are what came with the program.

  Yes, I think that the problem is caused by putting the cs5 plugins in the folder plugins photoshop cs6.

  Delete the plugins and cs6 should work much better.

  The reason why you don't see the plugins in the plugins folder, it is that adobe installs all the plugins bundled with photoshop cs6 to the necessary folder inside the Adobe Photoshop CS6.app

  and the empty plugins folder that you saw's plug-ins third as SuperBladePro.

• Problem with the evolution of the links when you save the model.

  What I have:
  Establishment of model in the "Templates" folder in the root of the site. In this model, there is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  
  When you create the new file based on the current model links the first kind to "pic/tran.jpg" transformations and second - "file:///Y|/home/3dsfera/pic/tran.jpg".
  
  What I have to do? How to preserve the original links in file created on the basis of the model.

  If the links are correct in the model, based on where the model is
  located, so they'll be correct in the pages of the child, anywhere
  within the site save you. DW will manage these links for you.

  If you see the absolute link 'file' persist after the registration of the child.
  It may be because of one of these.

  1 DW think that you linked to a page outside the local root
  folder, or
  2 DW think you have saved this page outside of the local root folder

  Did you one of the people?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "firefoxer_d" wrote in message
  News:g5vj0s$EBJ$1@forums. Macromedia.com...
  > What I have:
  > Creation of model in the "Templates" folder in the root of the site. In this model
  > There is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
  >
  > When you create the new file based on the current model links of the first kind
  > changes in 'pic/tran.jpg' and second-
  > 'file:///Y|/home/3dsfera/pic/tran.jpg '.
  >
  > What I have to do? How to keep the original links in file created on the basis
  > of
  > model.
  >

• When you save the labels, they save as bmp files

  When I try to save the groups tags that I am, they want to put in the form of bmp files. I just started having this problem Sunday morning March 6. When you save them before they were very good. I have never changed a setting or anything like that, so I don't know what the problem is. But it seems that I have to run a disk clean every time I save one in order for the next to be saved with the file extension, what it is, such as PNG or GIF. I hope you can help me with this situation. Very frustrating. I have Windows XP.

  Shivers58)

  Hello

  I suggest you to set the file on the file type associations and check if the problem persists. Click on the link below.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  I suggest give us the steps to recreate the issue on our systems so that we can have a better understanding of the issue.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Crashes when you save the eps file

  Don't know how to solve this problem. Saw the comments on changing the time zone, but I can't seem to find where to change this setting (within AI? or are they referring to my computer settings?) Have also tried to install the new Adobe CC 2014, but even that one goes down. Also, I rebooted the computer, but it's always the same problem.

  Thanks for any help.

  Try to "Place" instead of "Import".psd files  When you place the images, you have the possibility to link the files and then again when you save as > EPS.  You have probably inadvertently incorporated the .psd files.  The right method of importing image files using the file > place command.

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• How to return a step towards the column in mac when you save the file

  Often when I save files to the web, I want to go back just one step of a subfolder for the column instead of going all the way back to the folder root in the sidebar. How can I return just one step?

  Order arrow up.

  In a file dialog box, you can also click on the drop-down control that lists the current directory. This will show you the hierarchical path. In the Finder, control-click on the title of the window.

  https://support.Apple.com/en-GB/HT201236