Why did I receive a notice of "temporary profile" when I connect to my computer

make a "temporary profile" notice when I connect to my computer while I log out of nothing is saved in the Favorites bar



You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

These problems and similar bugs can help:

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.

A temporary profile is loaded after you connect to a Windows Vista-based system

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »


Try these to erase corruption in the case where it plays a role.

1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN


How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log

3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista


Other methods:

Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then
go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do
Ditto for the other accounts that may be difficult. Then if necessary you can also reset your
Passwords in the accounts. Do not forget to leave your Admin account and the other to the
desired level.

Make another Admin account with your password and use it to fix the others if necessary. (a little
to repair with, do not to use regular account, a safety valve) always keep a spare ADMIN account.

DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

How to enable or disable the real built-in Administrator account in Vista

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty to a Vista - corrupted user profile

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Why did I receive a message for 2 weeks saying "secure connection failed" on Thunderbird?

    for the last two weeks, I get the "secure connection failed" message and clicking Add exception does not work.
    It seems that a lot of people have this problem and does not seem to be a practical solution on the help site.
    Thank you


    Please start a new thread for your problem with the information that you posted above. Provide as much detail as possible.

  • Why did I receive an email from Adobe telling me my subs about to run out?

    Why did I receive an email from Adobe telling me my subs about to run out? I bought a Creative cloud sub during a whole year ago a month - with automatic renewal too. I returned and checked my account with Adobe. That everything seems to be in order. Why do I get an email telling me that I have until June 10, 2012, before that the submarine runs?

    If you receive an email saying that your subscription is about to run out please ignore. Your subscription and the subscription status will not be affected. We apologize for the inconvenience and are working on a fix for this problem.

  • I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?


    Info on the link above will help you.


    More info on including a password reset disc info.

    See you soon. Mick Murphy - Microsoft partner

  • Why did I receive a "authors you trust" warning (author not verified in the dialog box) so that he was trying to install add-on?

    by downloading the plugin add-on, firefox has generated a dialog box "install add-ons only from authors trust you". I guess there is a good reason, that the browser displays this warning, at the time of issue, and I am not inclined to ignore it. I have a screenshot if necessary.

    I would like to know: if I should ignore this warning?

    Thank you!!

    Hello mrclaude, this is the default dialog that will be displayed during each installation of any extension. of course, there is a good reason to display this message if addons can be very powerful and very convenient, they could also do much harm. However, please note that all extensions hosted on addons.mozilla.org to get reviewed and approved before they become available to the public, so they can be generally considered as safe, especially those developed by mozilla itself of course.

  • Why did I receive this script error? chrome://global/content/bindings/browser.XML:187

    A lot of times when I tried to load Firefox, I get the message
    "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

    "Script: chrome://global/content/bindings/browser.xml:187.
    I am running version 3.6.8

    Response function of disease on what looks like a Chrome add the origin of the problem. Lately, it seems Chrome became problematic and I heard about browsers causing problems for other browsers. I recommend disabling modules from Chrome to see if that helps.

  • Why did I receive two copies of each email no matter what account use?

    In recent weeks, I changed all my accounts of POP IMAP secure server. Now each message that arrives is duplicated, and this problem has exceeded my limited knowledge. I'd appreciate some solve this.

    Thank you aixtools

    I remember I got a filter from the active copy, I forgot the original mail app existed, everything I have I must do now is to find the copy of copy function and cancel it. A magician, I'm not, but you gave me the direction to head, very much appreciated.

  • Why did I lose all custom web site settings when the computer is restarted? For example: TV Guide returned to the East Coast instead of local cable operator.

    I'm guessing that cookies are to be erased, but I set preferences not clear cookies. This happens when Firefox is closed. Only after restarting the computer.

    What security (firewall, antivirus) software do you have?

    Some security software has features of virtualization or sandbox which can cause protection problems and restoring files in the Firefox profile folder option after a reboot.

  • Why do I receive an error message that I am not connected to the Internet when I try to update to 9.3

    I tried to update to IOS 9.2.1 9.3, but after the update is verified, he said I am not connected to the Internet, but I can get on safari without problem. I have tried rebooting and turning my victory-fi off and turn it back on. I even tried plugging my iPhone hotspot. It happens if my iPad is connected to the power supply or not. Then it gives me the choice to start over, or remind me later. I've never had a problem before update. any ideas?

    Because Apple pulled the iOS versions 9.3 to less recent devices. Wait for a patch.


  • Why did I get a warning from paper size when you use the printed booklet?

    I am trying to use the facilities to print booklet in InDesign CS4 (running Windows XP). My document pages are portrait A5 and my printing parameters for the booklet are A4 landscape. However, the print booklet dialog box is warning me that "the booklet does not match the current paper size. Click Print settings to specify a paper size larger or the scale of the brochure to adapt. »

    Because, by design, a folded sheet of A4 is exactly A5, no scaling should be held. If I ignore the warning and continue with printing, every page of my book is followed by a blank page. I remember ever get this problem when I created version of the year last my brochure, using InDesign CS2.

    Anyone can shed some light on this mystery?


    Sorry, I guess I forgot to answer this question earlier. If the contours of the block are displayed, they take on the color of the layer on which they are found as a visual cue. You can hide the contours of the block on the view menu, or by pressing Ctrl (Cmd) + H. They will disappear also in preview (W).


  • Receives a BSOD BAD_POOL_CALLER 0x0000000C2 error when I shut down the computer.

    Original title: Blue error screen bad pool caller on the shutdown of Windows XP.

    Hi all

    I have a small problem here. Sometimes when I stop my windows, instead of going through close, it just gives an error of BSOD BAD_POOL_CALLER 0x0000000C2.

    Windows XP SP3 THAT starts fine everytime. Works very well, once started. I can connect to the internet, play games, watch movies, run software development and nothing bad happens. But as soon as the stop, sometimes (actually often) the BAD_POOL_CALLER error.

    1. I tried updates of windows xp. Windows is quite up-to-date now.
    2. I tried to update hardware drivers. All the drivers are now updated.

    But still at the stop, I get the BSOD with the bad pool caller.

    Moreover, before any error don't like this used for pop - up. So, I doubt it, if it's a hardware problem. But always welcome one of your suggestions. (Also, I have an another operating system installed and no error like this pop up on this side!)

    I tried to search the Internet, even asked people on IRC, etc., but most people encounter errors like this during the installation of windows or during start upward. Unlike me, where I get this error on SHUT DOWN.

    Thank you very much

    Hi nancyngoyi,

    You can try to download the latest drivers from the HP site. Later, check to see if the problem persists.


    Hope the helps of information.
    Please post back and we do know.

  • Why close and restart after 1 hour, while I am still connected to my computer?

    My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!


    Check the Task Scheduler to see if you have anything put out there.



    Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
    Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
    Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
    Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
    power off - Control Panel - Power Options.

    Look in the Event Viewer to see if something is reported on those.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.



    Check with this utility, just in case there is a situation of blue screen.

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    accidents and displays the information about all crashes in one table - free


    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.


    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).


    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista


    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    How to troubleshoot performance issues in Windows Vista

    Optimize the performance of Microsoft Windows Vista
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.

    There are many excellent free tools from Sysinternals

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.

    There are many excellent free tools to NirSoft

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.

    Many excellent free tools and an excellent newsletter at Karenware


    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    How to install a device driver in Vista Device Manager

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows 7 gives message "you have been logged on a temporary profile", whenever I connect

    I just re-formatted my computer and put windows 7 on it, but now whenever I log it gives me a message saying that I was connected to a temp profile and I'll lose info that I created on the account. Any ideas on what I can do to solve this problem would be greatly appreciated. Thanks in advance, Keth

    If the problem is limited to your current account, then the following process would be much simpler than reloading Windows:

    1. reboot the computer in Mode safe.
    2. log on as an administrator.
    3 Rename the file c:\Users\Keth in c:\Users\Keth.bad
    4 restart and log in as Marie.
    5. If it works, transfer all existing files from c:\Users\Keth.bad to c:\Users\Keth.

    The process is described in detail here:

    Post again if you need help with step 5 above.

    If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

  • I'm using temporary profile of Microsoft. Updated the question. A rec answer would be moot.

    I've been in the temporary account or a profile of Microsoft for about 2 months.  They are using my computer.  Don't panic!  But I have no way to contact them.

    I need to know what I can do in this mode, specifically out my old Creative sound card and put in my new with its pilots.

    I don't get the message that I'm in a temporary profile immediately.  It comes shortly after.

    There is a balloon in the lower right corner that says... "you have been connected to a temporary".

    View profile.  You can't access your files and files created in this profile will be deleted when you log out.

    Contact your system administrator to correct this.

    I have no two-way communication, so I have no one to ask.  If it is legit, I have no problem.

    I think that a Microsoft Team change apps on the market.  There is a number on the start page

    The market square which has increased until it reached 22.

    I can use the Internet, go to YouTube, MSN, etc. But my file titles exist with nothing in it.

    Please refer to my original post and the submitted answer.

    Thanks for your time.          Randy

    Hi Randall,.

    Do you get "Microsoft temporary profile" when you connect to the account?

    This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

    If you get this error message, you can perform the steps.

    I suggest you perform the steps mentioned by "James V replied on 29 January 2013" of a similar discussion.»


    Windows 8 connect to a temporary profile, how to fix?


    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Hope this information helps. Response with status so that we can help you.

  • I receive a notice of extension update manager

    I receive a notice of extension update manager but still fails the U44M1P7 error code. I already downloaded and installed the same last version 6.0.8

    Why do I receive a notice that I need?

    U44M1P7 - updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

    ... a solution to this problem.

    1. launch of CC App (Photoshop, Illustrator, etc.)

    2. go to HELP-> UPDATES

    3. He will start Adobe Application Manager, then uncheck the BOX ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your applications up-to-date.

    4. click on the REFRESH"" button.

    U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:


Maybe you are looking for

  • Any way to install the Google search without Add-ons?

    Firefox (at least on the version of Linux) does not include the default Google search engine. She also cannot be manually installed by navigating to google.com because it does not "add a search engine" in the pull down menu in the search bar. (I'm no

  • Need new BIOS for Qosmio F30

    BIOS v1.30 for QOSMIO F30 is not compatible with Windows Vista. Do not upgrade this computer to Windows Vista, unless you first update THE system BIOS. Contact your computer manufacturer to see if an update is available. Where can I download new BIOS

  • C\...\mpengine.dll

    Avast free antivirus is one? in fichier--c\...\mpengine.dll--.   Info on it and do I need or is it OK to del this file?

  • The volume control in the taskbar is missing

    The operating system is Vista.  The volume control in the taskbar is missing.  How can I get that back?  My email is * address email is removed from the privacy *.  Thank you!

  • scanner HP: scanner hp 5370c

    I need to know how much power is needed for this scanner.   5370c the have not used for some time and power supply is with others, and all are different tensions... Don't know who's going with this scanner Thank you, Steve