Why do I get a blue screen with the error STOP: 0x0000007E every time I turn on my computer?

Similar Questions

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• Blue screen with the error ativvaxx.dll connecting video cam - Satellite A100

  Hi, whenever I connect my video cam, my system will crash and I get a blue screen saying there is a problem caused by ativvaxx.dll. Any of you guys knows how to solve this problem? I have a Satellite A100 system, it is new. Any help is appreciated.
  Thank you.

  Cool that you have solved the problem and thanks for the info. Perhaps, it might be useful for other users.

• Blue screen with the error 0X000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL.

  When I try to connect to the internet via my PeoplePC account I get a blue screen 0X000000D1 error Code and DRIVER _IRQL_NOT_LESS_OR_EQUAl.  I don't have this problem when I connect through AOL.  Is there a fix I can download to fix this problem?  My operating system is Windows XP Home Edition Service Pack 3.

  Yvonne

  Thanks for your help.  However, my security software tech Rep gave me a quick solution.  All I had to do was click on restore defaults for my security firewall.

• Windows Vista-used to get the blue screen with the error on it. Re-installed Vista and the programs one by one w/restorations. Now, I get the blank screen minidump file blue w/error after reboot and...

  I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.

  OK, I'll look for your next post with minidump files.

• I get a blue screen with an error 0x0000007A code.

  Original title: BSOD 0x0000007A ataport.sys

  Salvation to the whole community.

  First of all, I want to say sorry for my English, I'll try to answer as welle as I can! =)
  So here's my problem.
  I got a BSOD when using, or not, my computer. It seems at any time, and I don't know why.
  I took a photo of the blue screen, and I can provide it.
  I tried I tried to uninstall the antivirus software and latest software that I installed it, but the problem is the same. I disconnected the 3 HD and still BSOD.
  The BSOD is:
  KERNEL_DATA_INPAGE_ERROR
  STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X00000000B5F7E860, 0XFFFFF6FC400084E8, 0XFFFFF8800109D93C)
  ataport.sys - address FFFFF8800109D93C base at FFFFF8800107F000 DateStamp 4ce79293
  Data collection for the crashdump...
  Initialization of the disk for the crashdump...
  I installed win7 last Sunday, and the BSOD appears in this week.
  Maybe the drivers GeForce?
  What should I do next?
  PS: I forgot to say: operating system is installed on an SSD. I ran chkdsk and no problems were detected. I have a 1 TB samsung drive too and the 3To WD drive.
  I reinstalled Win7 after a crash of one of my Corsair memory. It works very well for a year before that.
  Thanks for help.

  Ok!

  My computer is running for a few hours with no BSOD more.
  My problem is solved. If the problem was with the Firmware of the SDS for the Crucial M4.
  Thanks for all the help and I hope that will solve all the problems for other users ;)
  Best regards
  Judicaël.
  You can close this topic.

• I get a blue screen with an error code 0 x 00000050 on Windows XP.

  This shutdown occurred at 5 or 6 times in the last 45 days with different parameters. No new something has been installed since the construction of the system. The problem started when I installed a card mother ECS RC410-M (2nd Board is installed). He ran reliable as far as I could tell for a while (weeks) with the second bedroom / cpu package. I tried a different processor (current is D945, used P4) and different RAM modules (current 2 x 512 DDR2 533). Seller Council is without help, as almost everyone I contacted. Obviously the system cannot be used in a critical environment. System generally works well. These cards were used by HP in the exact configuration, I built, I have a moment hard to believe the Board alone is responsible, but I'm ready to throw away the ECS. Is this the only solution?

  OK, I took a leap of faith and swapped the Mo, problem solved (01/16/10). I chose a Board with the chipsets listed by Intel to support Pentium D 945 I had. Apparently, the last execution of the manufacturing of the ECS boards used a substitution of the original hardware components and makes the Board less stable at high speed cpu.

  original title: need help with__PAGE_FAULT_IN_NONPAGED_AREA__STOP:0 x 00000050 (0xF000EF5D, 0x00000001, 0xBF80172D, 0x00000000) __Win32k.sys - address BF80172D base at BF800000, DateStamp 49e87572

  Hello

  Please contact the Microsoft Community and sharing this information with us.

  Glad to know that you were able to solve the problem. Feel free to contact the Microsoft Community for issues related to Windows in the future. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• Get the following blue screen on startup error: STOP: 0x0000007E, BAD_POOL_HEADER STOP: 0 x 00000019, IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A

  Original title: XP questions

  I am running WIndows XP Pro SP3 on a Dell Optiplex gx270s and get several error messages stop "Blue screen" intermittent and different at startup (for protect my computer). Prompt notification Windows found problems with the file system and run CHKDSK/F. I am unable to do so as I can not find my administrator password (also necessary if you plan to run from my XP installation disc). Windows Fix - It Center, running 'Folder & troubleshooting' reports icons randomly change the icons but no resolves not. I didn't notice the icons change and do not if this is related to Stop what error messages at startup, I've been doing. Running a disk check during start-up and Diagnostics IDE are not problems. It lasts for quite awhile and I've delayed just deal with it because it is not always the case. A lot of program installs / uninstalls and Microsoft Updates since its start if the system restore wouldn't do me any good. Before reinstalling the operating system, what are my options? Is there a way to reset my ' Administor password ", or better yet does not require one, (it is a personal computer for personal use only and I don't remember why a password has been assigned)?

  Here are some of the error messages:

  STOP: 0x0000007E (OxC0000005, 0x89AD8000, 0xA579CCB4, 0xA579C9BO)

  BAD_POOL_HEADER

  Technical information:

  STOP: 0 X 00000019 (0X00000020, 0X89D5FDA0, 0X89D5DC8, 0X0A050002)

  IRQL_NOT_LESS_OR_EQUAL

  STOP 0X0000000A

  (0x6750300C, 0 x 0, 00000002 00000000, 0x804FFDB6)

  Hello

  You did changes to the computer before this problem?

  The administrator password cannot be reset.

  See the following article for more information: Microsoft's strategy concerning lost or forgotten passwords

  In the following troubleshooting steps may help you resolve this problem.

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  FIX: Error Message When you connect a scanner or a digital camera to a computer that is running Windows Vista or Windows XP Service Pack 2: "BAD_POOL_HEADER STOP"
  http://support.Microsoft.com/kb/934177

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• blue screen with the error of MEMORY MANAGEMENT. 0x0000001A

  Separated from this thread.

  Hello

  I have a toshiba satellite c870. When I turned on my computer, I got a blue screen by reading the following:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100% complete)

  If you want more information, you can later search online for this error: MEMORY_MANAGEMENT.

  Then it restarts and I get these 2 following errors of switching back and forth between the two sound tempting to prepare auto repair. See below:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: NTFS_FILE_SYSTEM

  Then he goes to the black Toshiba Logo screen as usual and reads the following:

  preparation auto repair...

  And then it goes to another screen blue read the following error message:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: FAT_FILE_SYSTEM

  He'll then return to the Logo of Toshiba screen, then the Blue error screen (NTFS_FILE_SYSTEM), then return to the Logo of Toshiba screen and then the Blue error screen (FAT_FILE_SYSTEM). It just keeps it again and again and does nothing else. I removed the battery, removed all caps, deleted all devices USB (mouse) and pressed the power button for 60 seconds. Then I put the battery in place, pluged in the power cord and it turned on. I got the same results, as shown above. NO CHANGE! HELP PLEASE!

  Well Vista and before "XP", usually, do not use the FAT32 file system, they use, as do the new OS NTFS.

  Vista/XP can read FAT32, & can / could use, but its outdated... Memory is not really in this case, but

  you too extended the hardware capabilities of the pc.

  From this point, try to start the BIOS, the value 'advanced settings' once this done, change BIOS for any add-on

  material, save & exit.

• Vista stops himself and goes to a blue screen with the error code debug_usb_code.

  Vista stops himself, and a blue screen appears with a debug_usb_code.  I have problems with windows shut.  Tried a restore point.  Finished in the configuration of the system and found that the windows Defender has been the origin of the problem at startup.  I disabled it, and the computer is now in operation.  However, it is slow, sometimes crashes after about an hour, it will be stopped by itself and give the code mentioned above on a blue screen error.  Then it will restart by itself.  Please help!

  Run systempropertiesadvanced.exe and in the startup and recovery section, click settings.  Then uncheck 'automatically restart '.

• blue screen with the error, radeon 5670 for playing world to stop warcraft.says to protect

  Compaq SR 5710y, OS is Vista 32 bit... My son used to play world of Warcraft and now it crashes while playing. It appears a blue screen and says something like was arrested for protection. I can't read it because it will turn off very quickly, but he also says that one of the causes may be related to graphs or something like that. The computer has a card Radeon 5670 inserted video.

  lizy62,

  As I have a HD5670 in my m8100eCTO, I bought this power supply 530W.

  http://www.Newegg.com/product/product.aspx?item=N82E16817182199