Why do I get error "20019 ADC conversion failed" with my pci-6143, when I try to use the DIO lines?

I am tyring to use one of the digital input lines on my PIC-6143 to go to the connection "enable" on the "write to file measure" vi.  I have two cards PCI-6143 acquiring analog signals of 8 channels per step, plus I have a digital DAQ assistant to the sample line of DIO 2 on one of the cards.  Normally I can start and stop recording using a signal of 5V to the DIO port several times until I get the error.

Strangely, when I use a simple Boolean "Record" button at the port of the 'writing on a file as' enable vi, I never get this ADC error no matter how many times I press the button.

I am including a screenshot of the error.

Thank you

Chris

Please ignore this message.  The whole issue has been resolved by copying and pasting the VI in a new file in VI.  The new file ran perfectly.  Must have been a compilation of LabView or something error.

Tags: NI Hardware

Similar Questions

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • When you try to use the texture of the paper adobe pro, I get: error a reference to a file / folder: 104

    When you try to use the texture of the paper adobe pro with CC2015, I get: error a reference to a file / folder: 104

    left Adobe Creative Cloud for General Photoshop Discussion

  • When you try to use the current content, I get the message "network error."

    My photos open in a mixture, but when I try to use the content aware filter, I get the message "network error."

    Can you please try this: logout and log back? Please let us know if the operation is back to normal. We will fix a bug in this area in a future release.

  • When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

    When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

    I'm not that computer literate and do not understand what needs to be fixed.

    This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

    I use ESET Antivirus Node32 software.

    Hello

    1. What is the error message or an exact error code?

    2 have you made changes on the computer before this problem?

    3. you try to check the updates?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and then try to download the updates.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

     

    Method 2:

    File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

    http://support.Microsoft.com/kb/310747

    Please respond with more information so that we could help you more.

  • 2072 AND 2126 ERROR when you try to use the printer

    ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

    Hello

    1. What is the brand and model of the printer?

    2. What is the exact error message you get?

    3 when was the last time you were able to use the printer?

    4 did you a recent software or changes to the material on the computer?

    Method 1:

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If the issue does not get resolved, then you can move on to method 2.

    Method 2:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Hope this helps and keep us informed if you need help.

  • When I try to use the send to compressed (zipped) folder option I get an access denied message

    When I try to use the send to compressed (zipped) folder option when I right click on a file I get the following message

    Unable to complete the operation.

    Access is denied.

    However I do have permisions complete on the file and I am the only user and administrator

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  This can sometimes solve the problem on its own.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

    I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • I have a microsoft wireless keyboard4000 when I try to use the question mark I get / can you tell me what the problem with it I was getting with a line above.

    I have a microsoft wireless 4000 keyboard when I try to use the question mark I get / can you tell me how to fix

    or what is the problem, I received an e with a line above.

    Hello

    1. what was your keyboard last working fine?
    2. you remember to make changes on your computer recently?
    Try the steps and mark for the question below.
    a. click the Start button, type region and language and press ENTER.
    b. click the keyboards and languages tab.
    c. click Change keyboards.
    d. in the pop-up window, click Legeneralonglet.
    e. under default input language, select English (United States) - US or any another language you use generally.
    f. click on the OK button.
    g. click OK button region and language.
    I hope this helps.

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. "__What I can do to fix this? __Thanks

    When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
    What can I do to fix this?
    Thank you

    Hi Palaimo,

    See if one of the patches in the following link works for you.

    Snipping Tool fails

    Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • When I try to use the impromptu slide show I get the message "video support is disabled" how to activate it?

    When I try to use the impromptu slide show I get the message "video support is disabled" how to activate it?

    It is a "Bug" in the software, waiting for a fix.

    It can be corrected temporarily by open images in the slideshow beforehand module and run the slide show IN THE module.

    When you return to the library grid view, the impromptu slideshow (Ctrl + Enter) will work.

  • I use LR cc and when I try to use the feature up, I get a message back indicating that "no connection found Upgright". I do not have ' had this problem in the past. IM using Windows 10 and I used a Canon 7 d Mark II with an II Canon 24-70 lens. No idea wh

    I use LR cc and when I try to use the feature up, I get a message back indicating that "no connection found Upgright". I have not had this problem in the past. IM using Windows 10 and I used a Canon 7 d Mark II with an II Canon 24-70 lens.

    It simply means that it cannot find enough information in the image to apply a correction. Have you tried to apply a profile and then using the vertical transformation.

  • The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when selecting th

    The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.

    The problem does not appear, if PH 13 items is run in administrator mode.

    The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.

    Please, advice how to fix this problem? Perhaps, there is patch or update available?

    I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.

    Scratch disk settings can be found under preferences / Performance.

  • Why my photoshop elements 12 ask me to sign when I try to use the function of photo editor

    Why my photoshop elements 12 ask me to sign when I try to use the function of photo editor

    I have exactly the same problem.  It all started this morning...

  • When I try to use the system restore I get an unspecified error response

    Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

    Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • I get a 0x80070424c error Code when I try to use the recommended settings for my Windows Firewall

    My PC suddenly stopped sharing music to my Xbox over the 3 days.

    My firewall is weird and it is said that "the Windows Firewall does not use recommended settings to help protect your computer.

    When I click to use the recommended settings, I get an 0x80070424c error Code. I tried following the steps here: http://support.microsoft.com/kb/968002 and it did not work

    Hello

    If you are having problems turning on Windows Firewall, follow these instructions:
    Download and install Windows Repair: '
    When repairing Windows opens, click the tab for Startup Repairs click Start. Clear all check boxes except for the following four:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer.
    I hope this helps you.
    Brian

Maybe you are looking for

  • Does not begin with satellite U840-110 - Windows 7 - loop start-up

    Hello I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboo

  • Cannot change the contrast, brightness, etc. on Satellite Pro 4600. Help please.

    I can't control the contrast, brightness, Saturation etc... using the control panel of Trident in my Satellite Pro 4600. Could someone help me to activate these controls?Thanks in advanceAndrea

  • FIFO DMA read high CPU usage

    Hi al, it's a long! I noticed a strange behaviour when I read from a FIFO DMA between FPGA and RT host on my crio (9014 controller and 9104 bottom of basket). The FPGA is writing data to the FIFO 2 points every millisecond and the loop of the RT is t

  • Crash had FSX after change of time & season

    Hello I select the following from the part of 'Free flight' from the main menu. -Aircraft (especially 738) -Airport / Gate Clicking to steal and the game is loading. When it starts, the game is very good. After that I change the following settings in

  • BlackBerry Smartphones setting a password for SMS

    I recently bought my blackberry pearl 8110 and I wonder if there is a way to set a password to prevent someone to read my text messages. Thank you!