Why do I have a 'General' error when trying to connect to a site on my laptop, but my office works fine?

Similar Questions

• Internal server error when trying to connect Facebook to Toshiba Places

  I'm looking for help with a problem I've met by using my toshiba SMART tv. I can't link my Facebook to my toshiba places account, it shows "internal server error" while trying to connect via the link given in the statement in the email I received.

  Can someone please help?

  Internal server error means that there is a problem with the server and nothing worng with your account.

  No doubt some temporal problems of the server recommend you simply wait until this problem could be solved.

• ORA-28545-error when trying to connect to a MSSQL DB

  Like many others, I came across problems trying to connect to a MSSQL-DB. I tried various things mentioned in the forum, but nothing helped.

  I did the following:

  On Windows INFORDBSERVER02 servers where our Oracle11-Installation is hosted, I installed the software bridge in a different location.

  During installation, I decided to use the port 1531 for the listener, and then asked me about the connection parameters to our MSSQL Server:

  Our database is located on the 'profileserver02' server and the DB is called 'profile', but there was an entrance third (for me unknown) and I gave him the same value

  as the name of the server.

  The listener has started and there was a listener.ora with the following entries:

  LISTENER_PROFILE =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1531))

  )

  )

  ADR_BASE_LISTENER_PROFILE = D:\Ora_GW

  I then checked the initdg4msql.ora, which had entries

  HS_FDS_CONNECT_INFO = [profileserver02] / profileserver02/profile

  HS_FDS_TRACE_LEVEL = OFF

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  On the server where I want to get access, I've added an entry for the tnsnames.ora:

  dg4msql.INFORDBSERVER02 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (CONNECT_DATA =

  (SID = dg4msql)

  (GLOBAL_DBNAME = dg4msql.INFORDBSERVER02)

  )

  (HS = OK)

  )

  Finally, I created a link DB:

  CREATE DATABASE LINK PUBLIC profile02 CONNECT TO "anw' IDENTIFIED BY 'password' USING 'dg4msql.infordbserver02 '.

  I tried to access the DB in issueing of position

  Select * from dual@profile02

  I got the errormessage:

  Error: ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: before 2 lines von PROFILE02

  SQLState: 99999

  ErrorCode: 28545

  Position: 19

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02]

  that got rid of this third unknown parameter, but nothing has changed...

  I tried to use the listener.ora.sample in the dg4msql directory

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  #CONNECT_TIMEOUT_LISTENER = 0

  but then the listener has not yet started.

  Any tips?

  For the first listener that you posted you do not have a section of SID. So he won't be able to lay a bridge. In addition, it would be easier when you use the earpiece of the spawn House door entrance to the gateway process o gateway.

  So put a listener.ora file at your home, gateway network\admin with this content:

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  Then stop the LISTENER_PROFILE listener, open a DOS window and correctly set the ORACLE_HOME. Change to D:\Ora_GW\bin and start the listener using lsnrctl start.

  What I don't understand is your comment:

  "

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02] '.

  I assume you are talking about initdg4msql.ora...

  So let's just check the link if it works...

  If not, please provide a status of Auditor for the listener of the entry door and an exit of tnsping from home using "tnsping dg4msql.INFORDBSERVER02" database Oracle

  -Klaus

• I get general error when trying to install Photoshop Fashion JC Béart Actions on, creative cloud is the most recent version and therefore

  tried to uninstall creative cloud and photoshop and still no go.

  Please try again, it has been updated to include compatibility CC 2015.

• activation error when trying to activate Windows 7

  Hello

  Now, I get an activation error when trying to activate Windows 7. Buy Dell laptop in 2011 with 64-bit, immediately downgraded to 32-bit. I reinstalled a couple of times as 32-bit over the years as ultimate and reinstalled as 64-bit last week.  The phone activation option is no longer accessible. MGADiag output are:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - X92GV - V7DCV-P4K27
  The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
  Windows product ID: 00426-OEM-8992662-00400
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {3C9B801E-13E4-4367-A27C-8F2B4747B3C1} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110408 - 1631
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {3C9B801E-13E4-4367-A27C-8F2B4747B3C1}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-004002S-1-5-21-111267970-249754281-3898313640Dell Inc.. Inspiron N5010 Dell Inc.. A10 20101117000000.000000 + 000AD753107018400FC04090409Time(GMT-08:00) Standard Pacific03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600400-02-1033-7601.0000-2762015
  Installation ID: 019180836386553581766085500053098341535002602530844375
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: P4K27
  License status: initial grace period
  Time remaining: 35520 minute (s) on (24 day (s))
  Remaining Windows rearm count: 4
  Trust time: 14:45:19 10/03/2015

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAIAAgABAAEAAQABAAAAAgABAAEA6GG6HpRUr4CoQoiCNCliOo3v6ppgDV6QXF0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  SSDT AMICPU PROC
  WN09 DELL SLIC
  OSFR DELL M08

  I'm always in grace period, but any help appreciated.

  Louis c

  Strange that Ultimate would come preinstalled as it is normally only Home Premium.

  Try to open an elevated command prompt type slui 4, follow the instructions to make the robocall.  If it fails, stay on the line to talk with activation agent.

  Otherwise, you will need to contact Dell.  They must have sold you a special Ultimate OEM disc at some point?

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• Why do I get access denied error when I try to connect to the printer?

  * Original title: Please help me

  Why do I get access denied error when I try to connect to the printer?

  Hello

  Try right-clicking on the printer software when installing it and select run as administrator.

  See you soon.

• I have a strange error when I close a combobox:

  I have a strange error when I close a combobox:
  
  < mx:ComboBox
  ID = "currencyComboBox".
  prompt = "Select currency" dropdownStyleName = "drop-down list.
  labelField = 'currencyName.
  
  >
  < mx: close >
  <! [CDATA]
  selectedItem = ComboBox (event.target) .selectedItem;
  calculateCustomerData();
  []] >
  < / mx: close >
  < mx:change >
  <! [CDATA]
  selectedItem = ComboBox (event.target) .selectedItem;
  calculateCustomerData();
  []] >
  < / mx:change >
  < / mx:ComboBox >
  
  RangeError: Index '7' specified is out of range.
  at mx.collections::ListCollectionView/getItemAt() [E:\dev\3.0.x\frameworks\projects\framework \src\mx\collections\ListCollectionView.as:422]
  
  This only happens when its dataprovider is from a result event rather than its dataprovider to arraycollection predifined collection.
  
  private void handleGetBanks(event:ResultEvent):void {}
  bankResult = new ArrayCollection ((event.result as collection ArrayCollection) .source collection);
  currencyComboBox.dataProvider = event.result as ArrayCollection collection;
  }
  
  rather than using the following as a dataprovider:
  
  < mx:ArrayCollection id = "currency" >
  < mx:Object label = "AED" / >
  < mx:Object label = "AUD" / >
  < mx:Object label = "CAD" / >
  < mx:Object label = "EUR" / >
  < mx:Object label = "NZD" / >
  < mx:Object label = "USD" / >
  < mx:Object label = "ZAR" / >
  < / mx:ArrayCollection >
  
  
  Can we see what else could be the problem?

  Sorry my mistake, the change event is invited before the close event. Then I could debug and find the problem

• We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

  * Original title: e/s problem

  I am not able to access my hard disk.windows that says: -.

  "D: / is not accessible." an i/o device error. "

  I also tried chkdsk but it says that it is not directly operatable.

  Hi Rishanpc,

  Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

   

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. have you checked if the cables are connected properly?

  2 what is an internal hard drive or external?

  3 have there been recent changes made on the computer before the show?

   

  The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

   

  Disconnected Hard Drive/cable misconfiguration

   

  Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

   

  You can follow the steps below and check if it helps.

   

   

   

  a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

  b. click on 'System' then go to the Hardware tab and click on "Device Manager."

  c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

  d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

  e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

  f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Get an error when trying to install DirectX say (xAudio2_3.dll is not designed to run on Windows or it contains error) need help please :/

  First of all, I got a new game called (2 prototypes) the game was working fine then when I tried to run 2 days after installing... I got an error message saying XAudio2 is not found. Please re - install the game and install him required DirectX 9 provided .0c or get the latest version of Microsoft and the game works without noise... I re-install the game, but the same problem appearing Dungeon, which is why I tried to install the latest version of directx, but during the installation of directx, I got another error message saying (xAudio2_3.dll is not designed to run on Windows or it contains error) I tried to fix it by doing the registry repair , but it did not work so someone can tell me what is the problem and why it work well before then I got this error without changing anything!
  Here, any help would be helpful thnx in advance :)

  Hello

  Please contact the developer to check whether the game is compatible with Win 7 or not, since we have no information concerning its compatibility.

  Windows 7 Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=ProtoType%202&type=software

  Try to install the game in compatibility mode and check. Give the link.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Check the version of DirectX to the computer referring to this article:

  http://Windows.Microsoft.com/en-us/Windows7/which-version-of-DirectX-is-on-your-computer

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  See the article on how to solve the problems of the game performance:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  It may be useful

• What is a 60 error when trying to share an iMovie on a disk?

  What is a 60 error when trying to share an iMovie on a disk?

  I have no idea what to do, but I was able to track down the actual error = "error-60 badMDBErr: bad master directory block"

  I could see the results of Google that dates back years for [imovie error "60"] - without parentheses

  ATTENTION: a result leading to a YouTube video was a veiled MacKeeper scam! Do NOT use MacKeeper or any other software!

• HP ENVY 700-330qe CTO desktop: HP has encountered an error when trying to analyze your product

  When I connect to HP support, correctly identifies my PC (HP Envy 700-330qe CTO Desktop), but trying to find the recommendations of the exceptional software, I get a message "HP has encountered an error when trying to analyze your product".

  It was working before and I used it to identify and install a number of revisions of software in circulation.

  Subsequently, he developed the above error. Is this just an artifact because I have all of the pending software elements recommended to install?

  Hi there @Scotsman101,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with a sweep to get recommendations for the software HP Support site. I'm happy to help you with this.

  It is possible that it was a small problem because there are updates on the forums and other parts of the website last week. It still happens?

  An alternative to this method is the HP Support Assistant, which includes several other tools. Please see the following pages where you can find the software and instructions on how to use it.

  HP Support Assistant
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• 750 - 055xt CTO M0K53AV #ABA envy: HP has encountered an error when trying to analyze your product

  I use a brand new HP Envy 750-055xt CTO. Added the SSD (Samsung 850 EVO 120 G) and 16G Ram (Total of 24G (from Crucial)). The Win 7 OS has migrated to SSD and formatted the original drive for the purpose of storing files to a printer large format (new HP Latex, which will happen later this month).

  Attempted to install Windows 10 but had multiple failures with error 0x80073B92 - 0 x 20009.

  Disconnected SSD in case it was originally the above error, restored the system using created recovery DVD to state of origin (but always with 24 G of Ram).

  In trying to pilot research and updates to bios on the HP support page, I now encounter error "HP has encountered an error when trying to analyze your product" which leaves me to proceed, except to order the DVD of restoration Windows 7.

  I know I'm forgetting something in this whole procedure, but I have no idea at the moment what it could be.

  This can help with the installation:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade-failed-with-0x80073b92-0x20009/15eaaeab-9ECB-4C06-bd8d-62c783d51cf6?auth=1

  HP site:

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/error-while-trying-to-scan-product/TD-p/5369812

  Hope this helps

• spectrum x 360: "hp has encountered an error when trying to analyze your product."

  whenever I try to identify my phone it says "HP has encountered an error when trying to analyze your product."

  Why is it so? is there anyway around it? I know that you can manually enter your product, but I was curious to see how it would work.

  Infrastructure solutions from HP support is a mandatory program.

  This product detection tool installs the software on your Microsoft Windows device that allows HP to detect and collect data on your HP and Compaq products to provide fast access to support information and the solutions. Technical data are collected for products supported by this tool and are used to identify products, offer solutions relevant and automatically updated on day of this tool, in order to improve our products, solutions, services and your experience as our customer.

  Note: This tool applies only to Microsoft Windows PC. This tool detects computers HP and HP printers.

  Data collected:

  • Operating system
  • Version of the browser
  • Computer dealer
  • Product name/number
  • Serial number
  • Connection port
  • Description of the driver/device
  • Computer configuration / printer
  • Hardware and Software Diagnostics
  • Ink HP/Non-HP or Non-HP/HP Toner cartridges
  • Number of printed pages

  Details of the installed software:

  • HP Support Solutions Framework - Windows, localhost Web Server Service and software

  Remove installed software:

  • Remove "HP Support Solutions Framework" via Add/Remove programs on PC

  Requirements:

  • Operating system - Windows 7, Windows 8, Windows 8.1, Windows 10
  • Browser - Google Chrome 10 +, Internet Explorer (IE) 10.0 + and Firefox 3.6.x, 12.0 +.

  You can try to disable adblock and adblock plus and see that he would invite you to install the software.

  In case you are still unable to download the software, I downloaded the software on HP Dropbox.

  HTTPS access: https://ftp.usa.hp.com/hprc

  FTP access: ftp://hpssf:^[email protected]

  Drop box host: ftp.usa.hp.com (15.73.40.56, failover: 15.73.244.52)

  Login: hpssf

  Password: ^ YHN9ol.  (NOTE: case sensitive)

  Account Expires: 24/02/2016-17:09:31 (drop box date expiration/deletion)

• Error when trying to open a software program "jvm.dll" errorloading.

  I get this error when trying to open a software program.  I created this disconnection problem not safely a USB drive.  I cleaned the registry and tried chk dsk, nothing helps.

  Hello

  1. what software you are trying to open?

  2. you only get this error message when you try to open a specific program?

  We suggest not not to use non-Microsoft registry, or the settings in the Windows registry, cleaners as this can cause problems of stability with the Windows system files. By hoot or by modifying the Windows registry can cause serious damage to the Windows system files and could break your operating system Windows causing data loss that would be not possible to recover.

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method:

  Step 1:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

   

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Step 2:

  Run the program with the altitude.

  Right-click on the specific program and select run as administrator. Check to see if that fixes the problem.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.