Why do I have to restart my internet wireless connection after restart of Windows Vista?

Similar Questions

• Could not get the internet/wireless connection after you installed new hard drive?

  I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop.  The hard drive crashed and I got a new installed.   I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet.  I researched this some, tried all the places with a parameter that can be a problem, but nothing helped.  What the hell did I miss?  The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.

  Hello:

  If your laptop computer is the Atheros wireless card, you probably just update the driver.

  The symptoms you listed seem to indicate that is the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99068-1&cc=us&DLC=en&LC=en&OS=4062&product=5185745&sw_lang

  Paul

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Why am I not able to download any of the service packs for windows vista home edition

  Why am I not able to download any of the service packs for windows vista home edition

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Have HP Officejet 6500. Wireless connection - scanner does not.

  Have HP Officejet 6500. Wireless connection. The print function works fine. However, when I try to scan a document, the "no scan option" prompt appear. It seems that the HP 6500 does not recognize either (my desktop or laptop computer)? Help

  Try to install the updates and the usefulness of this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3944627#N956

  mohanad

• Why do I have to restart my computer whem goes online?

  Sometimes, I have to sign when switching to the line with any of my password and name and zip code, sometimes I have to restart my computer.

  Can you help me?

  Ted

  Hello gtptan,

  To effectively solve your problem, I would like to get additional information.

  What model computer do you use?

  What operating system?

  What browser are you using to get online?

  Who is your internet service provider?

  How are you connected to the internet is a wireless or a wired connection?

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• How can I restart my windows vista computer? I have no cd or something like that.

  I have recently some problems with 'rundll32' and I try.
  I just thought to restart the system, but I do not have cd, just a product key on the back.
  Any ideeas?

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Pavilion 17 e020us: no internet connection after upgrading to Windows 10

  Hello guys,.

  I have a problem with the internet connection.

  My computer started to upgrate by itself for 10 windows while I did other work at my home. I was waiting until he finished.

  When it's done I realized that I have no internet, not only my wireless, but each of them, because I have a free to use wireless

  So, I start google how can I correct this situation. I did all the tasks that windows offer, typed the commands at the prompt command, installed the drivers, typed commands for dns, deleted cookies, rebooted my computer after I have finished the task and my internet still doesn't work...

  In the browser window, I use chrome and internet explorer, it says:

  "This site is not reachable.

  YouTube.com address DNS server is not found.

  DNS_PROBE_FINISHED_BAD_CONFIG ".

  As I said I typed the commands at the command prompt to DNS and delete cookies and it did not work.

  Please, help me to solve this problem with my computer and the internet.

  I'll be very happy)

  I have an e020us windows, 64 GB, laptop HP Pavilion 17 10.

  Hello:

  There are W10 drivers for the wireless card that your laptop model.

  This is the latest available driver...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74843.exe

  If the wired network adapter is not no longer works, see if the ethernet W10 driver works for you...

  This package provides the driver for the Ethernet Realtek controller in portable models supported and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72934.exe

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• After you install Windows Vista, I said that I have 30 days to activate it, but when I type my product code, I get an error message saying: I don't have a service pack installed.

  I put vista on my computer and it says I have 30 days to activate, but when I type in my product code I get an error message. I do not have a service pack installed, this is the problem? And if so how to obtain the service pack and what one should I get? I also have a problem with my automatic updates... many of them fail to install. How can I prevent that to happen?

  original title: product activation key

  Hello

  1. you receive an error message during the Windows update fails?

  Problem with Windows Vista Activation:

  Step 1:

  For the problem with the activation of Windows Vista, I suggest that you check the links below that would help you to the activation of Windows Vista.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  You may be unable to activate Windows Vista over the Internet by using the Windows Activation Wizard of

  http://support.Microsoft.com/kb/933177

  Activating Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  Step 2:

  Windows Vista has two service packs you can install service pack 1, and then later you can install service pack 2 on the computer.

  Service pack (SP) is an update of Windows, often combining previously released updates, that helps make Windows more reliable.

  To download the service pack, click the link below.

  Service Pack Center

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  Problem with Windows Update:

  Try to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Cannot access internet after downloading 'Software Windows Vista security 2011'

  Broadband connection is displayed instead of the connection original wireless. Downloaded the so-called security software Windows Vista 2011 2 days ago and I was not able to connect to the net' at all. Help.

  Hello
  you have downloaded the malware by the sound of things

  read all of this information:

  XP Antivirus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Lose internet connectivity by downloading photos (Windows Vista)

  I have a super frustrating problem that no one could help me with. Whenever I try to upload a photo from my computer to a Web site (attach photos to an add-on, order photographic proofs online etc.) the internet connection is lost and I have "local access" only. In order to make it work again I have to reset the modem. Any suggestions would be much appreciated.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner