Why do my AO create a Subvi doesn't work?

Similar Questions

• Why doe Adobe Revel on Ipad Air doesn't work anymore since the new update from today, July 2, 2014?

  Since upgrading my Adobe Revel on the airwaves of the Ipad, it no longer works.  It will not update to my Photoshop Elements and I can't open it on my Ipad.

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• How to create a Subvi without controls?

  Greetings,

  I go through exercises to learn LabView and I have a question.

  One of the exercises in my book is to create a Subvi, which generates a random number in a range of minimum/maximum.  (OK - re - invent the wheel)  I have the block diagram and I have the icon, but I have trouble getting the wired connections.

  Currently, it is a static value hardcoded for the min and max.  I wish I had a connector in each of the min and max (so that the parent can specify that however, he wants to be with a static integer, one entry, etc.) and then a connector for output - once again, without a control specified so that the parent can take the value and run with it.

  How to do wiring?  I can obviously fall into the controls in the front panel, but my parent project doesn't have space for 3 additional orders coming on it.

  Thank you

  newbo

  In the connector pane, you can right-click on a connector and select a setting.  You can assign "this connection is->" recommended or optional.  This will allow the VI to be called without these wired terminals of the parent VI.  If the left unwired, will serve as values by default that you put in the controls.

• Create a Subvi - priority subroutine

  Why is it not possible to create a Subvi from code with a priority of the subroutine? (with 'create sub - VI')

  (LabVIEW put just the Subvi with the same priority of subroutine)

  Is this expected behavior? and, if so, why?

  It seems that this behavior already has a CAR that are associated to him. The number of CAR is 383301.

  I'm sure that you have already done this, but the workaround is just to create the Subvi manually or to reduce the priority and create the Subvi (making sure to put the priority of these two VI to subroutine).

• Why transfer doesn't work?

  Hey, guys! Hoping someone here can help me. I am the proud owner of a Macbook (early 2015) of the retina, and I love it. I want to say that it was no problem, but I Can not - transfer does not work!

  I logged in iCloud by using the same Apple ID on my iPhone (iPhone 6 s, iOS 9.3.3) and when I log in Messages on my Mac, I keep seeing in the left panel under 'Preferences' that my account is inactive. Whenever I try to send a message to someone, the name comes in red and I'm invited to sign it - except when I hit the sign in button, I'm actually still signed in and the account is activated! I take a glance settings iMessage on my iPhone and noticed that there is no option for transmission of Message text, so it was not possible to activate this feature.

  I called Apple Support and they also found it strange that he did not work, they find more strange was that "I had all the ingredients, but it does not work" - which means, I am connected with the same ID, my number appears in the preferences of Message on my Mac, I signed with my identifier Apple to use iMessage on my iPhone... it's weird. The next day, I noticed that some aspects of the transfer procedure worked.

  Every time I open Safari on my iPhone, it appears in the Dock on my Mac and vice versa. It goes the same for mail. I also noticed under "phone settings" on my iPhone, I had the opportunity to receive calls on my devices to iCloud, which listed my Macbook. I thought: 'very well! an improvement! "Later, I invited to enter a PIN code of my Mac on my iPhone and voila! Transfer text messages was there, I entered the code and then prayed. Back to the start box, Messages on my Mac refused to work. I kept getting the same problem as above. I must point out that Safari, Mail and phone were still working through transfer.

  Today, I noticed nothing work - no mail, no phone and no Safari by transfer. The option to respond to calls on other iCloud devices have also disappeared.

  When I contacted Apple, I was put with a counselor... but I have not heard yet return. He was also puzzled over there (but very useful). The impression I get from Apple, this is a problem at the level of the device. I'm not so convinced, I'm thinking it was to do with my account on the end of Apple (perhaps the Server/service level?). To my knowledge, Apple Support and specialist have not looked into this.

  Here is what I tried:

  1. Turning iMessage/Facetime on my iPhone on and outside.
  2. Signature on my Apple ID for iMessage and Facetime and then signing back in.
  3. Disconnection and signature in Messages and Facetime on my mac.
  4. Signing in and out of the iCloud on my iPhone and Mac.
  5. Restart both devices when they are disconnected from the internet.
  6. Tried the signature using the App password. (did not work)
  7. Off the two-step verification. (that is, one more time)
  8. Signature on all of my Apple ID account by using only my email domain iCloud.
  9. IPhone restored like new.
  10. Recovery of the Internet on Macbook.
  11. Checked my iPhone automatically sets the time zone.
  12. To ensure that the region iMessage/Facetime and iPhone/Mac were the same (United States)
      1. I must emphasize that the region of my ID Apple is set to Barbados (where I'm from) so that I can use my local iTunes/App Store purchases credit card but I don't see how or even why it would affect the transfer procedure
  13. At the request of the Senior Adviser, I called my provider wireless (flow Barbados) to understand if they support the text Message Forwarding (they didn't know what I was talking about, first, that they said no encryption, it wasn't like call forwarding, and then when I explained to them, they said they were not sure and contact Apple even once).
  14. I don't know if this has nothing to do with it, but I find my iPhone refuses to connect to my MacBook via bluetooth after mating, my MacBook would say connected and my iPhone say not connected, and finally he would be dismissed. But sometimes it does not work when I use the Handoff... weird apps. Also, I can't seem to get AirDrop works, does not detect my devices between them. Just said that I would mention this in case it helps.

  Honestly, this has me has raged for a few days now and I'm really at a loss as to what I should do.

  Any ideas or suggestions? Whatever that either would be appreciated.

  UPDATE: transfer of telephone, Mail and Safari doesn't work again... still no luck with Messages.

  I have a few updates with screenshots, hope they help.

  So, I get this message when I connect using the same Apple ID on iMessage on my iPhone and iCloud/Messages on my Mac.

  

  When I signed, what happened. I was able to sign properly.

  

  As you can see here, my ID Apple is connected and my number is recognized. Note, it continues to tell me that iMessage inactive (red underlined).

  

  When I try to send a message to myself (even with other known users iMessage), this is what is happening.

  

  For some reason, the recipient turns into this red box, where is my Apple ID is the box and I am being asked to activate my account of iMessage. When I click the activate option, I see that I am connected and the ID is activated.

  This continues to baffle me.

• Why can't I create a new epub file in a model of epub on ibooks author?

  I try to import an epub I created on another platform in iBooks author in order to edit it there and re-export as an epub. When you choose file > new epub file and I choose a model, epub models are not available. No idea why? No work around? I don't see why I can't create an epub from an any epub.

  I don't think that iBA has the functionality you need.  You start with a model of epub and add things to it.

  You must use another application to edit your original epub.  Apple won't do anything for this AFAIK.

• Why ctrl + shift + t doesn't work anymore?

  Why ctrl + shift + t doesn't work anymore?

  The problem is solved in the next Firefox 26.0 and not 25.0/25.0.1

  For playback as Bugzilla is not a discussion forum.

  Bug 858975 - Shortcut key for Inspector is conflicting with shortcut key for undo close tab
  

• Why my home button doesn't work sometimes?

  Why my home button doesn't work sometimes? I have to click several times to activate it. I have an ipad 1 month 12.9 pro. Very frustrating. Thanks for any help.

  You can use a virtual Home button. To enable it, go to settings > general > accessibility and scroll down until you see AssistiveTouch *. You want that lights up.

• Why my photo album create multiple folders and duplicate my photos in folders?

  Why my photo album create multiple folders and duplicate my photos in folders?

  Can you give us more details about your problem? When this happens? It's an update of iOS for a newer version?

• How to create the hierarchy without creating a Subvi files

  Hello

  I have an existing LabView program that uses blocks of Subvi.  I want to change it so that I can't copy files Subvi (when I transfer the program to another computer).  The goal is to have a single file/program that I can copy, paste, and run on other computers.  So, I want to know if there is a way to create the hierarchy without creating a Subvi files or how to integrate the Subvi in the program.  My program and Subvi files are included here.

  Thank you

  Rocky

  You can create a version in an executable file.  It would be the most common way if you insist on having a single file.

  You could also build a source distribution in a zip file.  Then you just copy and paste the zip file and unzip it anywhere where you want.

• 'Create a Subvi' movements labels (LV2013) IMAQ image controls

  Hello

  I noticed a strange behavior in LV2013 (x 64 and x 86) what SubVIs creation from a selection containing Image IMAQ son:

  The labels out of place of obtained characteristics Subvi on IMAQ controls/indicators, see the illustration below.

  This VI

  

  is impaired by creating a Subvi for copying and masking as follows

  

  The Subvi created has a façade that result that looks like this:

  

  All labels on IMAQ orders/lights are completely irrelevant. I couldn't understand, what appears to be a function of the new position of the label. In any case, it is quite annoying, because labels sometimes moving out of the main visible portion of the public Service and you have to go and look for them (through the window). -You must identify all the labels with the command/indicator to put everything back in place.

  One of my colleagues has confirmed this behavior on a different windows PC, using the same version of LV in x 64 and the same version of Windows 7 Pro)

  Of course, a simple method of MoveToDefaultLocation on all PS elements cause they go where they are expected to be, but how tedious... I remember not such behaviour in LV2011 where I used 'Create Subvi' loads of times with IMAQ Vision functions.

  I'd be happy if someone such color in it. Thank you very much.

  Cleaning of façade create a Subvi is performed, but it's not explicitly change the position of the control and indicator labels. There seems to be a bug in VI server when setting the position of the refnums IMAQ. This bug is independent of the function to create a Subvi. When writing of the 'Position' of a refnum IMAQ control property, the label seems to throw himself in a weird position. I've not seen this with other types of control with other controls, their labels always remain in the same relative position when the control is moved.

  I'll drop a CAR against the Position and IMAQ refnums property. In the meantime, you can use the VI attached to this post to solve the problem. Follow these steps in LabVIEW 2013 or later:

  1 copy of the VI attached to the following location: [LabVIEW 20xx] \resource\plugins\CreateSubVI

  2. restart LabVIEW.

  Once you have done, the position of the label IMAQ refnum to correct every time that you perform an operation to create a Subvi.

• I created a Subvi to copy the Boolean status to my main VI, but I failed

  I created a Subvi and wanted to copy the Boolean status in my main vi, I wrote a simple code in the Sub - VI, but I can't achieve my goal in the mainVI,

  I know that I don't have to create a Subvi but only VI to do this work, however, out Boolean is the only function of my work, the Subvi has other things to do

  so to do this correctly, what should I do?

  Thank you

  Goto main block diagram, instructions are here...

• Unable to create a Subvi

  Hello

  Joined a VI that I want to creat in a Subvi. When I go to change-> create a Subvi... it is grayed out and disabled.

  I'm running out of certain stages, or something?

  Thank you

  BP

  You must select something to create a Subvi. So, just highlight using a mouse and then create a Subvi.

• Is it possible to create a Subvi of variable size (stretch)?

  I was wondering if it is possible to create a Subvi where its size (inputs and outputs) can be extended. To be clear, something like the CONCATENATE function, where you can change its size by making it bigger.

  James.Morris wrote:

  garrettmarsh wrote:

  Right-click Subvi > uncheck the "display as icon".

  Which does not allow the slide to add more entries, it changes just input/output are visible. I think OP wants a Subvi with an expandable size input/output similar to the Array Index or concatenate strings.

  Good point, my suggestion really offers only a cosmetic change in the way your diagram appears. OP, you might look into XNodes to do what you describe, but it will probably take some work. Last I heard they are a type of "use at your own risk" of functionality that is not officially documented or supported.

  There is some info here to help you get started:

  http://forums.NI.com/T5/LabVIEW/what-is-an-XNode/TD-p/1307516