Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

Similar Questions

• used computer connected to the TV using the hdmi connection. I replaced the hdmi cable and now all I get is sound and blue screen

  My computer runs on xp sp3. I have two hdmi connections on my TV, but it makes no difference if I change the connections

  Hi georgethompson47,

  I suggest you to update video drivers and check if it helps to solve the problem.

  Reference: http://support.microsoft.com/kb/283658

• Taking an HDR photo, why do you want 1, 2 or 3 F stop adjustment? One is better than the other?

  When you take HDR, what advantage does different values of stop F offer. I seem to be able to set the values, and the results are similar.  When should I use a value of 1 vs 3 worth?

  The idea is to extend the dynamic range of your camera.  The wider you make your efforts more wide range you can cover.  However, if you do the steps too big then the software will have problems stacking images.  Just like when you stitch a panorama of several shots, you make sure that there is a lot of overlap between the two.  2 eV (stops) has just settled on a common to use step: it works fine for programs, and it gives you good range with shooting a minimum.  I don't think that there is nothing more than that.

  Insofar as you see is not a difference with 3 increments: more modern cameras - by Canon -become around 11-12 stops of DR (at ISO 100).  Shooting a shot HDR 3 with 3 levels gives you about 18 stops of the DR.  That's a lot.  Chances are the scenes that you take pictures is not that much DR, this is why you don't see much of a difference.

• I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft. WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  I keep getting calls from some SAV microsof telling me I need to hold the CTRL key while pressing the key from microsoft.  WHY do you want me to do this?

  It's a scam.  I'm glad you don't fall for it.  All other calls suggest that tell you the caller you brought calls to the police who should dissuade continue to harass you.

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  https://krebsonsecurity.com/2012/08/tech-support-phone-scams-surge/

  http://bottomline.nbcnews.com/_news/2012/10/03/14206238-us-works-to-shut-down-tech-support-scam?Lite

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You want to reload items * like parts does not. Repeatedly askes to enter the password but my collar does not.

  You want to reload elements8 as parts does not. Repeatedly askes to enter the password but my sign in Photoshop will not work for the element. Help

  Please post related queries from Photoshop Elements

  http://forums.Adobe.com/community/photoshop_elements

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

  I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Qosmio G30-126 - no sound when I use the TV tuner

  I can't get the sound to work when I use the tv tuner in windows media Center. Can someone help me?

  Hi dude

  First of all, you should check if the sound is set to high.
  This can be checked in the-> sound and audio devices Control Panel

  Did you also check the details of the Media Center settings?

  Under settings-> General-> Media Center installation, you should check the configuration, the parameters of your speaker and Set Up TV Signal.

  Please select the country of law. This is important because each country using different PAL signals.

  Oh I forgot to mention that you can change the settings in the BIOS of PAL and NTSC.

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• When I try to send and receive e-mail using Windows Mail, it wants to use a made up connection. How can I use the wireless connection?

  Windpws Mail & Wi - Fi

  I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.

  Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties.  You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.

  Steve

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I bought the software told me that it is possible to install the

  Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I purchased the software, I was told that it is possible to install the software on a second computer. But I also read lately that I will be allowed to work with a computer. I want to work on both of my computers without or install and / activation of the software every time. Is this possible? Thank you!!

  @

  You should be able to install the product on two computers as long as they are running at the same. The platform should also be Mac

  You can download the product of

  Download the CS6 products

• That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview?

  That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview? also any idea on how to make both and and how to increase the ram?

  Please answer me when you can

  Tthanks

  FAQ: Why preview RAM only play in my composition?

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Mylenium

• Don't want new tiff files saved in my catalog if I'm only using the image of a composite.

  During the edition of Photoshop CS4 of LR3, the new fit will not appear in the catalog unless I have save in PS. In the LR4, it saves a new tiff in my catalog without worrying if I save the image edited in PS or not. I have a library of clouds, I use often and don't want new files saved in my LR catalog if I'm only using the image open for compositing. Can someone help me understand how to change the workflow to resemble LR3?

  The behavior of LR, create and save a TIFF file is automatically used when LR and ACR do not run a version of equal. In order for Lightroom to be able to place an image without creating a TIFF file saved the LR and ACR version must match. This will be possible until CS6 and cab 7 fate PS. Then when LR RTAs versions and match, Lightroom image from Camera Raw to make in Photoshop using a thing called 'bridge Scriot"LR tracks to open the file in Photoshop. If you don't save it, LR knows and no file is added to the catlog. If you save or you save as in Photoshop, Lightroom knows and adds this file that you saved, regardless of where it was saved.

  So, again, there are two fundamental behaviours of Lightroom. If LR and ACR match, LR titles the image where (if) you save. If LR and ACR are out of phase of pf, Lightroom renders a file TIFF is saved before sending it to Photoshop. And no, ACR 6.7 does not count as in sync with LR4... 6.7 the cab is a stop gap measure to allow users of LR4 open images with parameters of PV 2012... It will not be until you get 7 ACR in CS6 you will get optimal integration between LR, ACR and Photoshop.

  BTW, this behavior is consistent across all versions of LR/ACR for LR2.