Why does my itouch not charge or be recognized by the computer at home

Similar Questions

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why does he move not CS4 (disks or download) on the new Windows 7 or Windows 8? I have unsuccessfully faced with tent to install my version of CS4 on a new computer, after the failure of our old one...

  I have suffered in vain trying to install my version of CS4 on a new computer after our old failed... always installs modules and peripheral software but fails to install PhotoShop, Illustrator, InDesign,... in short: something useful.

  Hello
  It's very strange. You see an error message? The installation fails right or what's happening? Can you be more specific please then I will try to help you with this one?

  Thank you
  Martin

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song.

  Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song?

  Maybe the current list of the song has the songs listed in alphabetical order, and you have the iPod nano to play in the order of the list...  How do you think iPod nano to read the list of songs?

• My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  They diagnose what's wrong with it.
  If it requires no parts, he (should ' t) costs nothing.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• CD/DVD is recognized by the computer, but does not

  My CD/DVD is recognized by the computer, but does not... tried fix it did not help

  My CD/DVD drive has stopped working.  My computer recognizes the drive but when I put a disk in it cannot read.  I tried multiple disks, but nothing will work.  I tried microsoft fixit, but it does not work.  He said that the media cd/DVD drive is not readable.  Help, please.

  Is that your CD/DVD drive is older than 1 year?  Then, the drive may be defective, with a faulty lens.

  I don't think that any form of manual registry change or fix tool will work in the situation.
  S.Chatterjee

• Hi, when I create a text box, and I type text in it, then I resize this text box, I want to see inside moving text at the same time I'm re-sizing of the text box. It does show me not LIVE what is happening inside the text box while I'm re-sizing text

  Hi, when I create a text box, and I type text in it, then I resize this text box, I want to see inside moving text at the same time I'm re-sizing of the text box. It does show me not LIVE what is happening inside the text box while I'm re-sizing of the text box and the same goes for the area of the image, I hope I could clarify my question.

  When resizing of a text box, click and hold for a moment before starting to resize. This will allow to see live redesign.

• WHY DON'T I HAVE TO PRESS F1 TO START THE COMPUTER?

  WHY DON'T I HAVE TO PRESS F1 TO START THE COMPUTER?

  We could not tell you, it's a function that is located on the computer itself, only not part of the Windows operating system.  However, this means that the computer has a failure any and he's trying to tell you about it.  What does the screen say?

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• MP3 player is not recognized by the computer.

  Original title: MP3 problem

  Whenever I connect my mp3 player to my laptop my computer does not recognize the device. It allows, but now he's not even appear on my media player either. Was there a change of setting or what continues? i; ve tried restoreing my computer, but who did not have any good either.

  Hello

  1. The question is limited to the MP3 player?
  2. What is the number and the model of the MP3 player?
  3. You receive an error message when you connect the MP3 player to the computer?
  4. Other devices not detected when connect you to the computer?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can run the fix provided in the link below and check if that helps resolve the issue.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Since one or two weeks, the docking station settings are not saved. When I restart the computer, the dock is not finished because he was and is located at the bottom and not left

  The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).

  In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.

  The apple logo reboot and empty the trash.