Why does my site seem different when I FTP?

Similar Questions

• Why does an image seem different when I'm going to point to the library back

  Why an image look different when I go to develop the library or back.  The histogram doesn't seem to change, but you can see a difference and I printed the and see the difference.  Very strange and I don't know how to process the image

  > Person adobe and they said it's because develop use proPhoto and library use sRGB and users go between D L & until they get the picture they want.

  Yes it is misinformed. Only on a few screens of high quality should you be able to see a difference, and even then it will only appear in a few images and be quite subtle. If you see differences between the library and to the point, it is almost always a bad monitor profile that is fixed by the recalibration of the screen using calibration material (essential equipment when you do photography on any computer) or it's the problem has already been mentioned with the gpu acceleration not loading right monitor profile. Which is fixed by disabling GPU acceleration in LR 6/CC.

• In FF4, why my site is different when www is omitted

  My site is different when I use www in the address and when I omit www. Look at http://www.dynapipe.co.uk and http://dynapipe.co.uk.

  This does not happen with FF3 or IE7, 8 or 9 or Google Chrome, only FF4

  Try to reset the Zoom factor on each of these pages, a 'domain' is probably zoomed in or out.

  https://support.Mozilla.com/en-us/KB/page+zoom

• Why does the url keep refreshing when I'm not in touch with her?

  I typed in the website (www.n2yo.com) and press return to open it. Unfortunately he keeps just acting like it is refreshing and not to open the Web page. That is to say the image to the left of the url continues flashing alternating with a square as the form, and the circle of progress and the line at the top just guard flashing and back to zero.

  It worked fine yesterday. Some parts of the Web site worked very well earlier today too. But now all the variations of a page in this site seems to do the same.

  Thoughts? Advice?

  I see the same thing during the visit of this website with Firefox and Google Chrome.
  
  I am looking for some JavaScript that runs on this Web site is broken I get a page when I disable JavaScript.

  The web console shows a lot of errors like these:

  An unbalanced tree was written using document. Write(), causing data from the network to be analyzed again. For more information https://developer.mozilla.org/en/Optimizing_Your_Pages_for_Speculative_Parsing @ http://www.n2yo.com/:12

  You can contact this Web site to inform them about this issue.

• Why does my site display properly in Firefox but not Safari/Chrome?

  I have looked through all my code and do not understand why my previews site perfectly well in Firefox, but in Safari or Google Chrome all elements of the site work but the images that make up the background appear empty or with a blue question marks in a box on them.  I made the site by slicing layers in Photoshop then saved the HTML as a template and added the relevant divs.

  It displays a good overview on Dreamweaver as well but it is precisely these browsers on that it does not work.  It is used to preview very well on these browsers while I was doing it until I added the flash element to it, so I don't know if this has something to do with it, although all Flash elements appear and function ok.

  methumeddwl wrote:

  Thanks SnakEyes, I managed to get rid of the Alt error now.  My structure automatically becomes a tabular presentation due to the importation of the slices directly from Photoshop in a fixed layout?  All of a sudden I have all these new upcoming errors for no leftmargin, topmargin, marginWidth don't and marginheight as well as the height, so it would be ok if I just deleted all references to the latter in the code?

  Nancy Merci for these links to page layouts ready to use, they will definitely come in handy for my next site.  As I want my site to be a fixed 1024 x 700 does what a function table plan?  I want it be fixed instead of liquid that I want all the Flash animations to show in specific locations on the site.

  This is why you should not export the HTML from Photoshop.  To answer your question that exports only Photoshop like HTML 4.01, which is why he has these attributes.  In addition, everything is an image in a table cell, which leads to many problems.  Learn how to cut out pictures and use everything that CSS can offer will make better code.

• Why does my code HTML seem different when I add in Muse?

  I'm working on creating a popup of the mailing list and it looks like this, when I test in a HTML Tester:

  

  However, when I add it in Muse (object-> insert HTML code), it comes out that looks like this:

  

  Just for reference, I put it in an album of pop up when a user accesses the home page.  Here is the HTML code I use:

  <! doctype html >

  < html >

  < style type = "text/css" >

  form {}

  border: 5px #01a0ac solid;

  border-radius: 25px;

  Padding: 15px;

  Width: 600px;

  height: 425px;

  do-family: 'Myriad Pro', 'Myriad', without serif.

  }

  . Border {}

  black border: 1px solid;

  Width: 500

  pxdisplay: inline-block;

  float: right;

  Clear: left;

  Width: 450px;

  text-align: right;

  padding-left: 20px;

  }

  . Input {}

  background-color: #01a0ac;

  do-size: 16px;

  color: white;

  border: black 1px solid;

  border-radius: 25px;

  Width: 150px;

  height: 30px;

  }

  < / style >

  " < form action =" https://bodyfitmd.perfectmind.com/22395/contacts/signup "autocomplete ="on"method ="post"onsubmit =" return formCheck (this); setCookie()">

  <!-- ****************************** ADDING IN LOGO ****************************** -->

  " < Center > < img src = ' http://www.bodyfitmd.com/images/bfmd%20logo%20png.PNG "width = height 150px = 150px > < / img > < / center > < br / > "

  Sign up for the new < br > BFMD

  And be the first to know about our special promotions and well-being tips, delivered directly to your Inbox!

  <!-* Registration AND CAMPAIGN ID *->

  < input name = "signupId" type = "hidden" value = "#" > < input id = "ReferralCode" name = "ReferralCode" type = "hidden" >

  "< input name ="CampaignActivity.Campaign"type ="hidden"name =" # "value =" #">

  < to input id = "stepToGo" name = "stepToGo" type = "hidden" value = "CheckoutComplete" >

  < input id = "goBackUrl" name = "goBackUrl" type = "hidden" value = "/" >

  <!-- ****************************** FORM INPUT ****************************** -->

  < br > < br > * first name < input class = "border" id = "First name" name = "FirstName" type = "text" > < br >

  * Family name < input class = "border" id = "LastName" name = "LastName" type = "text" > < br >

  * E-mail address < input class = "border" id = "Email" name = "Email" type = "text" > < br > < br >

  < Center > < input class = "input" type = "submit" value = yes, "sign me up!" > < / center > < br / >

  By registering for our Newsletter, you consent to BodyFitMD sending of our newsletter, occasional additional communications and invitations to our events. < / make >

  < / make >

  < / html >

  I have the values entered where # is showing above.  The site currently lies at bfmdtest.businesscatalyst.com.  Please help me understand what Miss me here!  Thank you!

  To get a good start with CSS, several software web design (like Muse) use a 'standard' to assign several HTML tags of more practical, before CSS values even to create specific CSS rules. Probably the HTML that you use, does not provide such a standard or modified values settings. If the code that you insert can carry a tag HTML, ID or class, which was already a style Muse. So he can behave properly, requires some curious and tinkering with the HTML and the CSS...

• My site is different when the load on the server than it does on preview

  I designed a sensitive site by using a template in Dreamweaver CM³.  When I did a preview of the device on my cell phone, the site looks great.

  I loaded the site on the server and saw the site on the same phone, the site has made quite differently and in fact, is not very usable... it is made smaller than the version that I presented in preview.

  Not sure where the problem lies... any suggestions?

  Thanks in advance.

  My first reaction is to ask if you have included the following meta tag in your document

  My second answer, if the above does not resolve the problem, is to ask for a link to the site so that we can have a look for ourselves.

• Why my audio file seems different in CC Flash when you preview in SWF?

  When I listen to the audio file after import into the flash library, it seems normal, but when I saw it in SWF, it sounds rather distorted. Is there a reason why?

  Check your audio settings by click on file > publishing settings and click on the links following the flow or event.

  

• Why does my document change color when I save it?

  

  For some reason any my document changes color when I save it as a .pdf or .ai file.

  I checked the color mode is CMYK mode.

  I also went in the shade options and changed all Pantone colors used in the document of 'book' to 'CMYK', but I still get this problem.

  Any suggestions?

  Also, make sure that the Inclusion of profile is set to "Include all profiles" as what is indicated in the screenshot of Mike. Not all the presets include the profile. For example, save a PDF with the Preset Illustrator does not include profiles. It always intrigued me as to why.

• Site looks different when editing on another computer

  Hi all

  I have Adobe CS4 on my laptop and created my Web site on this machine. A co-worker has also CS4 on their machine. I downloaded our website to their machine so that the person can do some changes.  However, when I open a page on their site machine seems all wrong. The divs are not published where it should and things don't align.  I downloaded the entire site (css files), but it's like they css is not connected.  Is there something special that needs to be done on the computer of your colleagues?

  Thank you

  Chris

  No, dreamweaver is the perfect Companion for making web pages. Its when inexperienced amateurs build a site and then get stuck. Through just a couple of the posts in this forum and you'll see what I mean. DW is great for people who know how to use it. A lot of newbies is on a web site or download some model and then all of a sudden they're in over their heads

  Users need to take a test html and css base before you can purchase/download a model online. They end up right here ask questions even when

• Why does my site work only without the www before the domain name?

  I recently spent Squarespace to Godaddy to host my must-see site.

  I just uploaded my new muse site and it works, except when I enter www before the domain name now, he pulls up to the old squarespace site.

  I need people to be directed to the new site that works, but only if I omit the www before the domain name.

  What is wrong here?

  How can I solve this problem?

  You should check the DNS settings of your host on your account manager. Have one with the www prefix and a normal root area is two separate things, although most of the suppliers will automatically record both variants. You may need to complete certain formalities to migrate your domain registration successfully.

  Mylenium

• Why does CS3 ask a DVD when it has been downloaded?

  For some strange reason, CS3 claims that I have to reinstall. So, I downloaded the installers of the store. The ReadMe file simply double-click on setup.exe and follow the instructions. The first thing it does is to ask the DVD is inserted. How is this possible when the application has been downloaded? Is what kind of logic this? How can I get the installer of re - install the products I paid?

  I am very dissatisfied with adobe right now.

  You do not uninstall the original version and there may be a few references to a DVD of installed base stored somewhere. The installation of the so-called repair does not, in any case. Uninstall everything first, then reinstall it. You may also manually remove the caps.db in C:\Program Files (x 86) \common fiels\Adobe\caps. Note that due to a bug in CS3, you need to run twice, what is uninstall, remove the ccaps.db, reinstall, uninstall again without remove the caps.db and then reinstall a 2nd time or well you can see mistakes a license.

  Mylenium

• Site seems truncated when published

  Hello, I just changed a line of text and adding an image on a site I created with dreamweaver. Once I did I put the site on the server and when I saw the site through the web address, which is www.calhounassociates.net all the text and images are distorted to the top of the browser web it appears in all browsers, but looks good while I'm editing in dreamweaver... what it might be?

  Code validation errors can cause browser tearing problems.  In the DW menu file > convert > select a type of document that corresponds to your coding (HTML.4 strict or XHTML 1) transitional skills

  Difficulty of other errors reported below:

  http://validator.w3.org/check?verbose=1&URI=http%3A%2f%2Fwww.calhounassociates.NET%2f

  Change this in your CSS:

  td {
  
      color: #FFFFFF;
  
      font-family: Verdana, Geneva, sans-serif;
  
      font-size: 11px;
  
      font-style: normal;
  
      font-weight: normal;
  
      font-variant: normal;
  
      position: absolute;
  
      top: auto;
  
  }
  

  to do this:

  td {
  
      color: #FFFFFF;
  
      font-family: Verdana, Geneva, sans-serif;
  
      font-size: 11px;
  }
  

  Note: I removed the Postion: absolute & albums: auto and other stuff that you don't need.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Why does the race partly disappear when I line up outside?

  Hello

  I have a simple rectangle with a gradient, and a race of 1 point.  There are two strange things going that I can't understand: I can't change the weight of the race to 0,5, at least I have change the race to line up outside or inside.  The problem is that when I change the line to align to center align on outside or inside, appeas to race for pushing left and down the path to the large and completely disappears on the low left side.

  Any suggestions would be greatly appreciated.

  Thank you

  Paul

  1. what version do you use? Maybe CS5

  2. what type of document is it? Maybe a web document?

  3. If so, it may be the "Snap to grid of pixels" option turned on (he died in the transformation Panel)

• Why does app mgr "not settle" when it tries to update itself?

  I reinstalled the mgr app, by following the instructions on the CC website, as it was supposed to be damaged (although it worked fine a few hours ago).  Whenever I try to download PS CC, the app mgr will trying to update itself and "settles", so I can't even begin to download any other App (running Windows 7 on a Dell 64-bit laptop.  I have several apps CS6).

  MrOvin, Could you try to delete the desktop application of creative cloud using this cleanup Adobe Creative Cloud tool and then log on to creative.adobe.com and download the creative cloud desktop application and check.

  http://www.Adobe.com/support/contact/cscleanertool.html