Why does take more than 10 minutes for the internet to connect?

Similar Questions

• Why did take more than 15 minutes and always my PDF conversion is not downloaded?

  Why did take more than 15 minutes and always my PDF conversion is not downloaded?

  Hi Karen,.

  Try to convert by using the web Interface using this URL: https://cloud.acrobat.com

  Kind regards
  Rahul

• Why does take more than 20 hours to run MSE from the upgrade from Vista to Windows 7

  I've upgraded to Windows 7 a couple of days.  Normally, I run a full scan of MSE once a week at night while I'm SLEEPING.  Since upgrading to Windows 7; MSE 5% complete the next morning.  I don't know why it happened - please let me how to fix it.

  I suspect that the problem is that your computer came into fashion "sleep" during execution of MSE.  There are a number of discussions related to that on this forum as the following: http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/why-doesn option is to change your power settings to prevent the "sleep mode", and then change them back.  What I do is run a small program called insomnia which remains visible on the screen, so I remember to turn off once the scan is complete: http://insomnia.en.softonic.com/

• After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

  After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

  These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

  Uh, no.

  iPad 2 questions are far from "widespread".

  Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

  users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

  Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

• opening of session takes more than one minute (win vista)

  Hi, I have vista premium 32 bit version with 4 GB of ram and 2 x cpu 2.00 GHz each I have no problem with the hardware and all drivers are up to date and my whole system I revised myself, but I can't work out just why he is more than a minute at the start screen of vista with the scrolling green bar? Now I don't know what im doing with my system, but im either missing something or there is a more serious problem. I just found a solution that gets rid of the problem but he always comes back.  the solution that I found was if I reset my read-ahead using a piece of software called tweakVI my computer starts perfect as it was just installed fresh lol. BUT after I rebooted to new that dates back to more than a minute to boot.

  
  
  I used boot procmon log too, and I got 1 thing that takes a lot of time at startup, close to 80 seconds. Svchost.exe notifychangedirectory path: c:\windows\tasks and the result is success there is 4 wires still taking 80secs and a little more ideas what can I do with this?
  
  
  I also tried other things like (clean boot) disable all non-microsoft services and which does not address the cause, as well as audit service task scheduler to see if he was on a departure delayed but it is set to automatic.

  I doubt that it was a Windows Update.  Simply charge things.

  Frankly - until the boot time go beyond 3 minutes on a modern machine, I think very little of him.  At initialization time means very little compared to how it runs once it is up.

  I systems I demarrer start from SSD, installs own, etc.  With the things that start (antivirus, antimalware, various services for wireless and wired networks, firewall, etc.) sometimes it can take more than a minute--sometimes two.  Generally not - your stay below / 1 minute.

  What is your exact (of cold/off voltage) (three trials minimum) start?

  What a warm reboot (choose to reboot and when the powers of the screen wide going / empty to start loading, start time)?

  Use "AutoRuns" to see what everything starts up.

  "Process Explorer" allows you to really dig into what is currently running.

• Why do my Predator G3-605-UR20 more than a minute for starting.

  When I do a cold boot, it takes more than a minute, sometimes 5 minutes to start. During this time there is no activity on the LEDs on the top of the computer. Normally I put the computer in hibernation. It only take a few seconds to start. It seems that the post test blocks looking for material. The hardware is the same, as it came from the factory.

  I unplugged the DVD player and the machine seems to start fine now. Replace the DVD drive. Thanks for the help

• Addition of text field in a PDF file and takes forever, why? Literally more than 1 minute of each text field

  I have a PDF file created from Microstation.

  I try to add some text fields, but it crashes whenever I have add a text field.

  Literally, it takes more than a minute per text field.

  The file size is only 475 KB so its not too big.

  I use Acrobat Professional X

  I already tried flattening of the document and NOTHING!

  I have re-print the file using PDFCreator and NOTHING!

  Please help me :-(

  Kind regards

  
  

  I'm sorry, I thought you were using 11 Acrobat. Preferably this parameter was introduced with Acrobat 11. In Acrobat 10, you can instead set the agenda tab 'Order tabs by Row' or something other than manually or not specified. To do this in the "Tab order" drop-down list in the component fields in form editing mode. If you want a custom tab order, wait until set when you have added all the fields.

• Thunderbird may take more than a minute to open, how to fix this?

  Sometimes the thunderbird program may take more than a minute to open, sometimes it only takes 20 seconds. How long this program normally does open?
  What can I do to speed up this process?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• After updating to the latest version of Itunes, it works really slow, takes more than a minute to recognize my Iphone and will not correctly backup my Iphone

  IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17

  After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed

  Running on a 64-bit Windows 8.1 Dell computer.

  ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.

  I rebooted the machine. Remove the locked file. All have failed to solve the problem

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

  TT2

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• Save an empty document in CC InDesign and Illustrator CC takes more than 3 minutes.

  Save an empty document in CC InDesign and Illustrator CC takes more than 3 minutes.

  Even if you open an empty document.

  I watched the State of the application using the activity monitor and every time I saved a document, that the application did not respond after three minutes then comes back to life.

  I work on a MacBook Pro 2.6 Ghz, 8 GB of Ram with OS X 10.9.

  Please let me know if someone had the same problem because I use Adobe software not only for my personal work, but also to show people how the Adobe software works...

  Thank you.

  Andrea Spinazzola

  Do you have Adobe Reader installed on your machine? I had a similar problem and it was related to an incompatibility with Adobe Drive, I uninstalled drive and everything worked fine.

• Need to write a query that takes more than 2 minutes to run

  Hello
  
  I use Oracle 10 g in my database.
  I am writing a small program for test purposes, my requirement is to write a query that takes more than 2 minutes to run. Right now I have only a small Table, called 'Users' with very less data.
  
  Please let me know how I can get this thing?
  
  Thank you.

  How to make a request for execution for more than 2 minutes with basic data.

  as below
  Select * from $ source, $

  or any generic query of CARTESIAN PRODUCT

• MacBook pro takes more than a minute to start

  My Macbook Pro takes more than a minute to start. I though it was normal, but I've seen Macbook Pro my friend and it only takes 15 seconds to start. How to improve the startup time of my Macbook?

  Replace HDD SSD may speed up OS boot as well as launch Applications.

• Firefox takes more than a minute to open after clicking on a link of e-mail in Outlook Express.

  When I click on a link in Outlook Express, Firefox takes more than a minute to open the page. I have 2 other computers running the same operating system (XP) and the same versions of Firefox and Outlook Express that do not have this problem. Firefox is my default browser.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!