Why doesent runstate.sequencefile.data.seq.mysequence.mystep.result.numeric contains a measure value when I use it in a reminder of the UUT post?
Hello
I want to write that a witch of the csv file contains all the measured values and the limits of my machine. So I try to give the values in post use reminder to a vi. The limits work and the csv file contains all my limits, but the measured values are all 0. I used runstate.sequencefile.data.seq.mysequence.mystep.result.numeric
I do not want to do with FileGlobals because they are values much.
Thanks for any advice for this problem.
There is probably a better way to accomplish what you want. But to make your life easier, I'll give you the hacky solution:
Use: Runstate.ProcessModelClient.Data.Seq.MyStep.Result.Numeric
The funny is that the report must contain all the information you want. Just, I would create an engine to convert your csv look. If you use 2012 then this seems to be an ideal candidate for a plugin.
Hope this helps,
Tags: NI Software
Similar Questions
-
Data Currency Adjustment of entity are not copy through rule when we used the value source as "ECT."
Hi all
Data Currency Adjustment of entity are not copied through rule when we try to copy the data from one entity to another entity for the same account if the account is to have only the data entity Currency Adjustment but rule the data copied correctly when the entity is to have Exchange entity adjustments and currency of the entity.
Wrote the rule to copy the values from the source account ' entity currencies Total "to target the currency of the account"entity ". Rule works as follows:
1. If the source account's currency of the entity and entity Currency Adjustment, total value ECT (EC + ECA) copy correctly to currency of the entity to the target account. -OK
2. If the source account's single currency entity (has no entity value Currency Adjustment) then under rule copy data properly to account currency of the target entity. -OK
3 but if the source account has only entity Exchange adjustments (has no value of currency of the entity) and then under rule is not copy of account currency of the entity of the target data. -Requirement
Could you please see the rule below and please suggest possible solution to copy the Court of Auditors with the help of ECT when the source account has only ECA.
If Hs.Entity.Member = "120006_ALTER" and HS. Value.Member = "Currency entity of <>" Then
HS = IS_Account. Account.List ("NetProfit", "[Basic]")
For each Account1A in IS_Account
Set dataUnit HS =. OpenDataUnit ("E #120006.A #" & Account1A & ".") W #YTD")
numItems = dataUnit.GetNumItems
If numItems > 0 Then
For I = 0 to numItems-1
Call dataUnit.GetItem (I, vAcct, ACIP, vCust1, vCust2, vCust3, vCust4, AllocAmt)
If AllocAmt <>0 then
GSA Exp "A #" & Account1A & "=" & _
«E #120006.V # < entity Curr Total >.» "A #" & Account1A
End If
Next
End If
Next
End If
Thank you
Mahesh
I thank very you much for the quick response. I tried with the above but no luck.
-
Hello
I got this e-mail message for a long time but have not been accessed for a while
I just looked at it and found it empty, could someone explain what has happened to all the messages in my Inbox?Thank you.
[Moved from the community centre of Participation]
Accounts become inactive if you don't sign no more than 365 days VIA the WEB BROWSER or within the first 10 days after signing
Once an account becomes inactive, all messages, folders, etc., are removed. Incoming messages will be sent to the sender as being undeliverable.
Your account name is still reserved. During this time you will not be able to re - use the same name of e-mail.However, if the account stays inactive for a further 90 days, the account name may be permanently deleted.
If you are not using your Windows Live ID for 365 days, your Windows Live ID account is permanently deleted. Once the account is marked as active in all data is purged, so even if you could get the return e-mail account data would be gone... -
RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?
RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?
Can someone explain to me why when I use something like->
RunState.SequenceFile.Data.Seq ["Test Seq"]. Hand ["Test not"]. Result.Status
the status will never be updated if I am set up for LabVIEW Run - Time Engine (but will work for the development of the system).
Also why->
RunState.Sequence.Main ["step Test"]. Result.Status
Update for LabVIEW Run - Time Engine and development?
I solved my problem with RunState.Sequence.Main ["step Test"]. Result.Status but I'm still curious why the reverse does not work? Can someone give me please a validation test?
Thank you very much!
RunState.SequenceFile.Data.Seq contains the copy of time change sequences. These copies are not at all when running. At run time, a separate copy is made (and is accessible from RunState.Sequence) and only this copy of runtime is updated. These runtime copies are made for several reasons such as the following:
(1) to ensure that changes to the sequence the runtime, do not affect the original version of the time edit of the file (you don't want to change the status to be an editing tool in the right sequence file?).
(2) to support recursion, recursive calls in the same sequence have their own copy of the sequence so that State for a call is not crushed by one recursively calls the same sequence.
There are probably other reasons as well, but these are probably the biggest.
-Doug
-
How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?
Hello
I'm trying to follow the steps described in the following link:
How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?
It is said
The software on the target currently supports only the time zoneand deletes the old files?
I need set the date and time
and remove all the old unwanted files
the calendar was gray does not allow me to change the current date.
Anyone know how to change
Hi all!
According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.
If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.
Please let us know if you have any questions!
-
why its shows no data found?
I have SEQ column in my table.
DECLARE
V_ENAME varchar2 (20);
V_SEQ varchar2 (20);
L_E_SEQ varchar2 (20);
L_ENAME varchar2 (20);
Start
SELECT ENAME, SEQ IN V_ENAME, V_SEQ FROM VEN_EMP WHERE EMPNO = 7369;
IF V_SEQ = 1 THEN
L_ENAME: = V_ENAME;
ON THE OTHER
L_E_SEQ: = V_SEQ-1;
SELECT ENAME IN V_ENAME FROM EMP WHERE SEQ = L_E_SEQ;
dbms_output_line (v_ename);
END IF;
END;
Published by: ayman on March 19, 2012 23:341 DECLARE 2 v_ename varchar2(20); 3 v_sql varchar2(20); 4 L_E_SEQ varchar2(20); 5 V_SEQ NUMBER(20); 6 L_ENAME VARCHAR2(20); 7 begin 8 SELECT ENAME,SEQ INTO V_ENAME,V_SEQ 9 FROM 10 (select 'FOR' ENAME,1 SEQ,100 EMPNO from dual union all 11 select 'FOR' ENAME,2,7369 from dual 12 ) WHERE EMPNO=7369; 13 IF V_SEQ=1 THEN 14 L_ENAME:=V_ENAME; 15 ELSE 16 L_E_SEQ:=V_SEQ-1; 17 SELECT ENAME INTO V_ENAME 18 FROM 19 (select 'FOR' ENAME,1 SEQ,100 EMPNO from dual union all 20 select 'FOR' ENAME,2,7369 from dual 21 ) WHERE SEQ=L_E_SEQ; 22 dbms_output.put_line(v_ename); 23 END IF; 24 END; 25 / FOR PL/SQL procedure successfully completed.What is the problem?
-
Summary:
Firefox using too much space on my Android phone, and this causes problems on my phone for example errors "Low on space". Android applications are unable to obtain updates to security due to the use of the high area of Firefox, which is a security problem.
Why Firefox uses as much space and how to prevent or solve this problem?
Details:
I am running Firefox on Android 2.3.4 18.0. I then Firefox my 8 GB SD card. This problem also occurs well in Firefox 19 & 20 of Firefox.
Firefox uses a huge amount of space. This is the largest app on my phone by a long shot. It seems that Firefox will grow without limits, until what it triggers a "low on space" warning on the Android device. When this "low on space" warning is reached, Firefox becomes unstable and I'm unable to install other Android applications. Often applications cannot be updated due to high usage space of Firefox and cannot receive updates of security which is a security problem.
Please see the following screenshot that shows that Firefox uses about 30 MB worth of space and is approximately two times larger than the next largest app, Google Maps.
https://www.dropbox.com/sh/7di3oh1p98bh68v/AoxNuqMKd4/2013.01.20-16.17.40.JPEG
If I go into ' settings: Applications: storage use: Firefox ", Android tells me that Firefox uses the following amount of space:
Storage: Total: 29.60Mb Application: 1.85MB Data: 27.76MB
Cache: 0.00B
When Firefox is freshly installed, the "Total:" use is closer to 3MB. But in the coming days, this number increases to 30 MB.
Why Firefox uses as much space and how to prevent or solve this problem?
Thanks for pointing the "browser.cache.disk.parent_directory" option I understand the implications of privacy to store the cache outside the profile directory, but I don't have much choice. Firefox as an App has increased slightly with the latest version (8 MB to a value of policies) and my phone was so full that the system was not the application updates to security for other applications. I have that is need to get this resolved the problems of disk space or I will stop using Firefox.
I did it for free space:
- Create a new folder on my SD card ("/ mnt/sdcard/something /")
- Under ' subject: config' set browser.cache.disk.parent_directory to match the new directory created previously.
- Restart Firefox (I had to kill the Firefox application)
- Went to a few sites such as Facebook and Pinterest cache-heavy
- Checked the cache didn't work under ' subject: cache'
- Remove old files from the cache in my foo.profile/Cache Directory
- Went to "subject: config' and came back some of my manual settings that it took months to save disk space."
Now Firefox uses 10 MB less space on the memory of my system, then he has done it before. I can also make the larger cache (much larger) which will speed up the display of Web pages.
I couldn't create a symbolic link from my old Cache Directory to the new directory of Cache.
More info about "browser.cache.disk.parent_directory" can be found at http://kb.mozillazine.org/Browser.cache.disk.parent_directory
-
My iTunes does not detect my iPad. I use Windows 10, Norton 360 and the latest version of iTunes. All software are up to date, and each says it works correctly.
Turn off or get rid of Norton. I really don't see why you need it.
-
Control of data using multiple thermocouples via indicators and the waveform in real-time
I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform? Thank you very much!
PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!
I see that you use the DAQ Assistant to create your task. Now I understand why you may have about labelling. It is easy of the seller NOR spiel booting... But in any case, you already have a task to the MAX instead of use the DAQ Assistant? The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties. For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend. Also, I don't know any property for this dynamic data type node, although I never use it either. I suggest the setting up of your task and channels, Max if you'd give it a go.
Since I thought I didn't really takes you all the way with you help, I wrote another one. It uses a cluster, even if it's a bit barbaric. I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.
-
Adobe Bridge CS6 on my Toshiba 32 bit?, I don't know why, but when I try to run this program, then the DEP blocks Adobe Bridge, what's the problem?
This means that the program will use the incorrect memory or he is attacked by hackers or virus. See if there is an updated version.
To allow the program to function in any case type DEP in the Start menu - Help and Support.
Help
Change Data Execution Prevention settings
Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.
If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.
Click to open the system.
Click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Under performance, click settings.
Click the Data Execution Prevention tab, and then click turn on DEP for all programs and services except those I select.
To turn off DEP for an individual programSelect the check box next to the program that you want to turn off DEP for and then click OK.
If the program is not in the list, click Add. Navigate to the Program files, search for the executable file of the program (it will have the .exe extension) and then click Open.
To turn on DEP for an individual programClear the check box next to the program that you want to turn on DEP for and then click OK.
-
Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?
This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.
When BindByName undefined, it works as expected.
I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.
I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.
Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.
Please see the example below.
---
Environment (default):
Windows 7 Professional 64-bit SP1
Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT
.NET framework 4.5.51209
Local system: EN - UK (but also does not, EN-US).
Oracle.ManagedDataAccess 4.121.1.0
"< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >
Environment (base):
Windows 7 Professional 64-bit SP1
Updated Visual Studio 12.0.31101.00 //SEE above 4
.NET framework 4.5.51209
Local system: EN - UK
Oracle.ManagedDataAccess 4.121.1.0
"< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >
Call stack:
mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal) mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown) > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)
Example:
----
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Oracle.ManagedDataAccess.Client;
using Oracle.ManagedDataAccess.Types;
using System.Data;
namespace NoddyConsole
{
public class Program
{
public static int Main (string [] args)
{
Error int = 0;
Errors += Command_ExecuteReader_BindByName_Fails();
Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();
return errors;
}
public static int Command_ExecuteReader_BindByName_Fails()
{
Error int = 0;
Try
{
var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");
var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");
Conn. Open();
IRRELEVANT
OracleGlobalization og is conn. GetSessionInfo();
og. DateFormat = "HH24:MI:SS MON-DD-YYYY";
Conn. SetSessionInfo (og);
var cmd is conn. CreateCommand();
cmd.CommandType = CommandType.Text;
BindByName. cmd = true;
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;
var prm1 is cmd. CreateParameter();
PRM1. ParameterName = "rc";
PRM1. Direction = ParameterDirection.ReturnValue;
PRM1. OracleDbType = OracleDbType.RefCursor;
cmd. Parameters.Add (prm1);
/ * SHAUN.recreate_issue_1 * /.
var prm2 is cmd. CreateParameter();
PRM2. ParameterName = "in_code";
PRM2. Direction = ParameterDirection.Input;
PRM2. OracleDbType = OracleDbType.Varchar2;
PRM2. Value = "A";
cmd. Parameters.Add (prm2);
/* */
var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
/* *-/
OracleRefCursor orc = null;
cmd ExecuteNonQuery()); must fail here
ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;
If (orc is nothing)
throws InvalidOperationException new ("Invalid return the ref cursor type");
var = orc player. GetDataReader();
/* */
While (reader. Read
{
var values = new object [reader. FieldCount];
drive. GetOracleValues (values);
for (int i = 0; i < values.) Length; (++ I)
{
Console.WriteLine(values[i]);
}
}
drive. Dispose();
cmd. Dispose();
Conn. Dispose();
}
catch (Exception ex)
{
Console.Error.WriteLine (ex) Message);
Errors ++;
}
Finally
{
Return (true);
}
return errors;
}
public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()
{
Error int = 0;
Try
{
var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");
Conn. Open();
IRRELEVANT
OracleGlobalization og is conn. GetSessionInfo();
og. DateFormat = "HH24:MI:SS MON-DD-YYYY";
Conn. SetSessionInfo (og);
var cmd is conn. CreateCommand();
BindByName. cmd = true; // ####
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works
var prm1 is cmd. CreateParameter();
PRM1. ParameterName = "rc";
PRM1. Direction = ParameterDirection.ReturnValue;
PRM1. OracleDbType = OracleDbType.RefCursor;
cmd. Parameters.Add (prm1);
/ * SHAUN.recreate_issue_1 * /.
var prm2 is cmd. CreateParameter();
PRM2. ParameterName = "in_code";
PRM2. Direction = ParameterDirection.Input;
PRM2. OracleDbType = OracleDbType.Varchar2;
PRM2. Value = "A";
cmd. Parameters.Add (prm2);
/* */
var reader is cmd. ExecuteReader();
OracleRefCursor orc = null;
HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
cmd ExecuteNonQuery());
ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;
If (orc is nothing)
throws InvalidOperationException new ("Invalid return the ref cursor type");
var = orc player. GetDataReader();
While (reader. Read
{
var values = new object [reader. FieldCount];
drive. GetOracleValues (values);
for (int i = 0; i < values.) Length; (++ I)
{
Console.WriteLine(values[i]);
}
}
drive. Dispose();
ORC. Dispose();
cmd. Dispose();
Conn. Dispose();
}
catch (Exception ex)
{
Console.Error.WriteLine (ex) Message);
Errors ++;
}
Finally
{
Return (true);
}
return errors;
}
}
}
---
create or replace package THAT SHAUN is
type ref_cur_type is ref cursor;
function recreate_issue_1)
in_code varchar2: = null
) return ref_cur_type;
end SHAUN;
/
create or replace package body what SHAUN
-TTS000233
function recreate_issue_1)
in_code varchar2: = null
) return ref_cur_type is ref_cur ref_cur_type;
Start
Open the ref_cur for
Select UO.object_name from user_objects UO;
Return ref_cur;
end recreate_issue_1;
end SHAUN;
/
---
Thanks a lot to qualify again for me Alex. I'll try upgrading to the latest version of the provider.
The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.
Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.
-
When I close thunderbird is still running in the background and always using data?
I'm with an internet provider that has limited use of data per month. If I close Thunderbird when done using it it is still running in the background and using the data or is it closed here for not to retrieve messages or using the data?
When you close Thunderbird, it cannot check or retrieve new messages.
Not sure what you mean with "always running in the background.
When you close Thunderbird is closed. Period. -
my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi
If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.
Good day.
-
whenever I have send an email on my hotmail my computer crashes when I use firefox! the Explorer is fine. Why so much?
This began to happen 1 week ago.
I tried to uninstall firefox a few times and it still does not work!
does anyone have a solution?Hello
Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
Also, try to bypass the cache
Reload the Web page while bypassing the cache using one of the following steps:
- Hold down the SHIFT key and click the reload with a left click button.
OR
- Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
- Press command + SHIFT + R (Mac)
If it does not help disable HWA used in firefox.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
-
Hello, my phone pulled from my class at school and it has no data on it, so I did not no how to locate without using find my iphone is there another way I could find as soon as possible
Go to iCloud.com
Then sign in with your Apple ID and password, then click the Find iPhone.
If this does not help, see: If find my iPhone is not activated on your missing device > what to do if your iOS device is lost or stolen
Maybe you are looking for
-
Video of JW Player pauses for a few seconds. Difficult to see. Help?
Watch a video on a site that uses JW Player. The video and audio will stop every few seconds. I watched the videos on this site before with no problems - but don't think I did since switching to Firefox. Appreciate any help.Thank you!Dennis
-
Pavilion 15-N240ee: Wifi driver problem
Hello When I close the lib (plugged), wifi turned off and my download stops all power saving settings is disable and lib is the 'status quo' (connected) I think that this problem is a bug in the driver Please help me
-
Password - when I turn the computer into a big red box with the words "Enter your password" appears
When I turn on the computer a big red box with the words "enter your password" arrives, we cannot go into the user explains, I forgot the password. We can't still press Delete to enter in the configuration because it is in the Enter password screen a
-
the keyboard does not (code 10 ps/2)
My keyboard is not working ps/2 code 10 in Device Manager. I have an e-machines T-3418 running windows xp.
-
the album art for mp3 files are is not displayed in the Solution Explorer, thumbnail display... it will display, but a few weeks back, I changed a few settings that stopped the album art of projection, I think that Help, please