Why don't the date and time on my mail in sync with local time and my PC?

TB 31.5
Earn 8.1

Thank you
ORI

See http://kb.mozillazine.org/Time_and_time_zone_settings for more details.
If you set the local time on your system are on the zone 'wrong', all messages (sent or received) will have a lag as noticed in your case.

Tags: Thunderbird

Similar Questions

  • Why Lightroom changes the date and some of my images on their import

    Why Lightroom changes the date and some of my images on their import

    The problem is that when I try to put photos in subfolders (depending on date) Lightroom some if put in the incorrect date - 10 hours AHEAD of the actual time that the photos were taken (according to the data from the camera).

    This is a bug for a long time in LR: Lightroom: import: folder names arrange by date around midnight of evil when using USB camera

    You use a USB cable to connect to your camera?  Try to take the memory card from the camera, put it into your computer's card reader and import from there.  It solves the problem for most people.

    I tried to move photos into their correct date subfolder, but then of course Lightroom cannot find more!

    Move photos within LR, instead of in the Mac Finder / Windows File Explorer.

  • Why don't the graph and the table of the DAQ Assistant, when it is run more than once

    I have a vi that collects data and the poster. When I press the run button, it collects data as expected. But, if I changed the samples or the rate and press the run button, it collects data on the previous values of the sample and rate. I have the release of the vi and run it again to perceive in the correct values of the sample and rate.

    I plugged it without the DAQ Assistant and everything works as expected. Thanks for your help. Now, just curious as to why DAQ Assistant does not work well.

    Thanks again!

  • As of the 31 version, why is there still no option of Thunderbird to insert the date and time in the message that you write?

    As of the 31 version, why is there still no option of Thunderbird to QUICKLY insert the date and time in the message that you write?

    Literally, saw this option very well needed - and opportunity-"promise" for three years now, and even if there are only one or two formats that could be used, at least the option is there.

    It seems that only is to bind a Macro, and the tool to Thunderbird and do it this way.

    Joe Rotello
    [email protected]
    Skype: joerotello

    If the installation of the add-on of TimeStamp is unacceptable for see you if there is a related add-on that you that you already might have managed to convince author to add your function. The Add on more for example has many variables that can enter the body of the message that get automatically replaced with the appropriate data when you merge a message.

  • Why the date and time is wrong when I start my computer

    Why the date and time is wrong when I start my computer

    CMOS battery die/of - usually about the size of a quarter on the motherboard of your system.

    It keeps things when you are not using the computer - if it starts to die/dies - then the time is no longer maintained.  Replacing, it is no different (in most cases) that replace the batteries of your TV remote or FOB car key.

  • is it possible to display the Date and time in the address bar or a clock window constantly

    I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
    I added the big clock background Add-ons, but it is visible to new tabs.

    Badly looking for help and it will be really appreciated...

    Try this extension:

  • Insert the date and time in a model of Pages 5,6

    When I open one of the default templates provided with 5.6 Pages (for example, a letter), I noticed that the document opens with the current date correctly inserted. Yet when I create my own model and save it as a document template (if in my models or elsewhere) the date stamp is no longer up-to-date. Whenever I have create a new document from the template, it gets stuck on the date that I created the template. This means that I have to click on the date each time and select 'Set today' (it's easy to forget).

    My understanding is that the inserted date stamps have is no longer an option of automatic update in Pages 5.x, so I was surprised to see their update automatically in the default templates provided with Pages. How Apple did this, and how do I get the same effect in my own registered designs?

    Pages v5.6.2 and OS X 10.11.5.

    I do not believe that something has changed with the way that Pages manages the dates that we insert into documents, or our new custom templates. The date will not automatically update for me when I create a new custom with a date of month template or a new document with a stamp of date/time in it. In both cases, wait 15 minutes, when I open it or the other, the date of the month in the model does not change and or don't have time in my document on my desktop.

    It stays with v5.6.2 Pages, if you want a date automatically update a model, or in a document current/Sour, you need to use a single table cell, without borders, which is the date of formatting, and has a single equation: = now.

    What I can not explain, for example, is the model of research paper that uses a date inserted regular field current date will appear automatically when opened for the first time in a new document. There are no tables in this model. There is no new parameters in v5.6.2 of Pages that can explain this behavior. This does not work for the user created templates. Pages could have been programmed to update only the date in the models grouped fields, but not user models - and if that were true, then it conforms to the demi-cuite nature in all of this application.

  • Camcorder Camileo P100 store the date and time

    My recently purchased camcorder camileo P100 store the date and time.
    Whenever it starts it must be reset because it refers to the default date.

    Has anyone else had this problem

    It looks like a camera malfunction don t think you can fix it.
    I suggest you to get in touch with the dealer and replace the cam

  • Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

    My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

    When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

    Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

    Hi guys

    Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
    The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

    So I see only two possibilities:
    Either you will charge the battery for real-time clock, or you ask the technician for replacement.

    Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
    If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

  • How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

    Hello

    I'm trying to follow the steps described in the following link:

    How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

    It is said

    The software on the target currently supports only the time zoneand deletes the old files?

    I need set the date and time

    and remove all the old unwanted files

    the calendar was gray does not allow me to change the current date.

    Anyone know how to change

    Hi all!

    According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

    http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

    If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

    Please let us know if you have any questions!

  • given the date and time not set when computer starts. also have a problem with typing

    by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

    on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

    You may have a failed in your motherboard CMOS battery.

    It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

    They cost about $5 to replace.

    http://www.computerhope.com/issues/ch000239.htm

    How to replace the CMOS battery in the above link info.

    See you soon.

    Mick Murphy - Microsoft partner

  • cannot change the date and time in the system restore

    How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

    System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

    If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

    With the help of the Windows Vista system restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

  • Want 5660 - how to change the date and time

    During installation, I thought that I had chosen the date and time.  Not happened.  After that installation is completed how to make these changes?

    Hey @Americanpioneer,

    Welcome to the Forums of HP Support!

    I understand that you would like assistance setting the date and time on your HP ENVY 5660 e-all-in-one printer. I would like to help you today with these two settings properly.  Please follow the steps below to set up your date and time.

    1. With the printer on, use your finger to scroll to the left on the touch screen (such as a mobile phone) and you will see the installer
    2. Select Setup to access the Setup menu
    3. Then tap Preferences
    4. In preferences, you will see now Date & time
    5. Contact Date to change the date on your printer
    6. Affect the time to change the time on your printer

    Please let me know if these steps don't resolve your problem. Good luck!

  • How to see the date and time on your images?

    I use camcorder Sony HXR-NX5U to shoot my video which I then edit in Premiere Pro. How can I record the date and time based on actually recorded video? Is a function that I need to set up on the camera or these data incorporated into each HD clip and all I have to do is just to change some settings in Premier Pro, as well as the date and time appear magically on my video?

    He is a third-party software which costs $80 to show the date and time. This is not an option.

    Can I ask you why you do this?  It of a unique client work, a curiosity or are you in the business of generating media for legal needs?  Adobe has access to view the metadata of the files in the metadata panels, however, source time is not available in timecode effects and overlays customized (via the program monitor tools).  It will be manual labor, which is ok if it is the specific need.  However, if it is a constant for your business, you must consider the types of tools that apply best practices (as the camera that allows you to record recovery /) or by using a third party tool like the one I mentioned.  No free lunch.  This has been a feature of the long and often requested.

  • How to add a pop-up window to set the date and time in a field

    How to add a pop-up window to set the date and time in a field? I know how to add the date. I create the field time with JavaScript event initialize like this:

    this.rawValue = num2date(date(), DateFmt(4));
    

    What I should change the script and the motive to do it properly.

    I changed the Format of data (object > link tab) date time but nothing happen. I want to set up a pop-up window as for the setting of date but with addition of time setting.

    Is this possible? Or that the date fixed like that? Should I get hour hand?

    Hello

    I don't think you will get both in the calendar popup. Basically, the popup calendar is the default behavior. It may be possible to develop a custom component, but it would take a bit of scripting and would probably not be worth the effort.

    I'd get the user to time manually entry in a separate field.

    Good luck

    Niall

Maybe you are looking for