Why dose Microsoft fix don't library so it dose do not require equipment ir

Similar Questions

• If I put a CD in the playback section of CD/DVD & written it says no driver, I tried Microsoft fix it & that's what he says is not readable media in the CD/DVD drive

  Original title: my PC can't find driver when I try

  My PC is windows media player update and since then he said I have no drivers, but only says that if I put a CD in the playback of CD/DVD & written section it says no driver. I tried Microsoft fix it & that's what he said...

  media in the CD/DVD drive is not readable (sony DVD - ROM DDU1613)

  I can't copy discs either, but the section DVD plays ok

  To install codecs for Windows XP, click here to download.

  Click on the KB article number to bring up the article and automatic FixIt.

  Article ID: 291818 -how to Download Codecs automatically in the Windows Media Player for Windows XP

  I hope this helps.

  Marilyn

• How can I repair my Microsoft Fixit Center?

  My Microsoft Fixit Center does not work and the 803C 0107 error code was cited. How can I fix this?

  Hello David,.

  1. what exactly is the problem with your computer?

  2. why run Microsoft fixit?

  3. what Microsoft fixit did you run?

  4 did you change on your computer before the show?

  If you have issues running Microsoft fixit, the right place to contact you would be supported from Microsoft fixit solution Center.

  I suggest you to report the problem in the following link to get resolutions for problems with Microsoft fixit.

  http://social.Microsoft.com/forums/en-us/newThread?category=msftsupporttools&Forum=fixitcenter

• When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  * original title - I have Microsoft Security Essentials? *

  Good news is THAT MSE is showing protection is enabled and given that you do not receive notification of Security Center advising the firewall is not enabled it can be assumed that it is enabled. Bad news is that I don't have an answer. You have any other real time protection(Avast, AVG, etc.) currently installed? What, if any, previous protection in real time of programs have been installed and they did include a firewall? You made using tools and methods to remove properly uninstall completely?

  Since it is a problem Microsoft Fix it I suggest you consider posting your question in the fix it Center Forum.

  Microsoft Fix it Center Forum
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You can also consider opening a Support box.

  Support-contact us
  http://support.Microsoft.com/contactus#TAB0

  Attach to e-mail
  E-mail address is removed from the privacy *.

  I hope this helps.

• Why dose Microsoft Money Plus Sunset through file convert each time the program is responsible?

  I have been using Microsoft Money 2000 sence I have 12 years of history, I've upgraded to Microsoft Money Plus sunset and converted my files.  Now when you load the program it takes a long time to load a message indicating the file that is coveted.  This happens every time. Why?  How can I fix this problem?

  Hello

  From your problem description, I understand you are facing problem with Microsoft Money Plus sunset.

  I suggest you post the same question in Microsoft Technet forum for Microsoft Money Plus Sunset related issues. We have a dedicated team to help you with the problems of Microsoft Money Plus sunset.
  Microsoft Money:

  http://social.Microsoft.com/forums/is/category/money

  Please do not hesitate to visit our Web site for any help related to the Windows operating system.

• How can I fix Microsoft Visual C++ Runtime Library

  When I try to update my NVidia driver when I get this Microsoft Visual C++ Runtime Library that says: the application requested execution to terminate in an unusual way... How can I fix it?

  Try to download Visual C++ from this link

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Good luck.

• Computer is not configured for Microsoft FixIt. Why not?

  Original title: when I try to use the hotfix program it won't work and it did until I get a reprt error saying that my computer settings are not configured for microsoft fixit program

  I get an error reprt back saying that my computer settings are not configured for microsoft fixit program

  Hello

  ·         Who solve this running?

  ·         The problem occurs with all fix Microsoft?

  ·         Which exact issue are you facing with the computer?

  Some of the fixit tools are designed to work with specific operating system. If you try to run Windows 7 repair on Windows XP, it cannot run. Please provide us with more information about the issue so that we can help you further.

  If you are faced with the question with all Microsoft Fixit, you can post your query to Microsoft fix Center solution for better support.

  http://social.Microsoft.com/forums/en/fixitcenter/threads

• Why microsoft fixit to keep day

  Downloaded the clicked on it appear to have installed to try to launch it is said it must update

  Hi, Peter Kempink,.

  1. what program are you trying to download and install?

  2 are. what Microsoft fixit you referring?

  3 are you referring to Microsoft Fix it Center?

  We need more information on the topic to provide you with the best solution.

  I suggest you to consult the following link for suggestions to ask question on the help forum.

  Suggestions for a question on the help forums

  If you are referring to Microsoft Fix it Center, the question would be better suited on the Microsoft Fix it support forum. I suggest you post your question on the following link.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• Microsoft 'Fix - it' created a restore point of its own

  I downloaded microsoft "Fix - it" and he has made a point of restoration of its own and does not allow me to go back further.  I have a problem and need to restore to an earlier date. I uninstalled Fix - it, but the new always restore point allows me to go further.  How can I remove Fixit restore point without format my whole computer

  System Restore is not a panacea.  Why do you want to use a previous system restore point?

  Sometimes the system restore fails, usually when you most need.  For this reason, some people don't rely on the system restore and make their own backups instead.

  In order to back up the registry, C:\WINDOWS\ERUNT is both free and easy to use.

  For more full backups, you must decide whether to back up only the data or the entire system.  It is easy to back up the entire system using a disk cloning/imaging application.  Here are a few:

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

  Finally, to help with your particular problem of restoring the system, start here--> http://bertk.mvps.org/html/srfail.html and http://bertk.mvps.org/html/error.html and http://bertk.mvps.org/html/tips.html

• Need help, Microsoft Fix it does not help. Running Win. XP Pro 2002 SP 3. I have already installed the "difficulty" to play videos

  I have already installed the Microsoft 'Fix It' to play videos
  and breaks down twice already and he did nothing for the problem.  I tried
  to download the upgrade Flash player three times and nothing happened.  He
  would not download on my computer at all.  Yes, I use Internet
  Explorer 8.  I do not use any player to play the video, any site with video on this topic
  or YouTube or anything with the video crashes the system.  Did I mention my
  System. is Windows XP Professional version 2002 Service pack 3 and Internet
  Explorer v. 8?  Help, please.

  Cheap flight,

  Guess what?  After writing the message that it wouldn't let me download the new drivers, I thought I'd go straight to ATI/AMD to see if I could download a new graphics adapter from them directly.  I did, and Voila!  computer running better, I can view videos now, and even, to my amazement, my wife Ipad becomes wiFi again.  I don't know why a new graphics driver would do all that but somehow it makes.  So, your advice worked quite well.  Also, I reduced my refresh rate slightly.  Maybe it helped a bit as well.

  Thank you!

• When I run microsoft fix it I get error saying that the Recycle Bin is corrupted and not to set

  folders and programs disappear or stop work system restore will not work

  Hello

  ·        What Microsoft Fix it are you trying to run on the system and why you try to run the patch on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below and let us know if the problem is resolved.

  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

  http://support.Microsoft.com/kb/297760

  Method 2:

  Apart from that, I suggest you check in the clean boot state, if the problem persists. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 3:

  I suggest to run a SFC (System File Checker) scan on the system and then check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Fixit error "an error occurred during the download of one or more components and cannot run the Troubleshooter"

  Original title: cannot run FixIt.

  With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135

  I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped.  The following message appears: "toubleshooting cannot continue b/c an error has occurred."  An error occurred during the download of one or more components and cannot run the troubleshooter. »
  These versions I've tried lately:
  microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Run
  microsoftfixit. Program.installuninstall.Run
  microsoftfixit. WinSecurity.fisc.8425861308153696.4.1.Run
  microsoftfixit. Wu.FISC.8425861308153696.4.2.run
  852581157233326805.5.1.run
  I don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353).  I tried to install this download since January of 2012.  The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update.  I remember somewhere along the way, getting the error message that some files were corrupt.  Your help would be greatly appreciated.

  Hello

  Are able to run fix it?

  You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• Vista to 7 ultimate; Hangs at 62% on the last step, even with the Microsoft Fix tool.

  Hello
  I'm currently upgrading my Windows Vista Home Premium SP2 to Windows 7 Ultimate edition. The entire dose has been smooth, except on the last stage, the progress hangs at as records of XXXXXX/XXXXXXX (62% to be exact). I came here and I tried The Microsoft Fix it (No. 50319) that has been proposed, without success. Currently I just make it run the time will hopefully fix. It was about 2 hours with no luck. I have not tried the difficulty It Yourself option, but I get woozy when messing around with records. Is there anyone else who is having the same issue, or better yet, a possible solution?

  In case it can help you, here is my system log;

  Model/carton: Gateway GT5477E
  CPU: Amd Athlon X 2 4400 + 3.2 Ghz 32 bit
  HARD drive: 400 (312 free) GB 7200 RPM
  VIDCARD: GALAXY 9500GT PCI-E 512 MB (single card) (removed for the upgrade)
  RAM: 4 GB DDR2 (4 X 1 Kingston mini-dimm)

  All my external USB, printers etc. Are of the United-pluged Nations and off. I have very little emission, which none would prevent more than likely that this progress, and a lot of free on my HARD drive.

  I was very surprised that the Fix tool It was not able to solve the problem. I'll let it run to see if time allows he rock forward, but it is on the same file from a certain time and its not not Lookin ' swell so much for me. Wish me good luck or grant me the knowledge. -Michael G.

  Hello

  You can wait for the difficulty he has done and if the progresses installation more than 62% then the issue is resolved.

  If the automatic fix does not resolve the issue then, try the manual steps to fix the problem.

  To fix this problem yourself, follow these steps:

  (a) restart the computer. Then, your computer will roll back to Windows Vista.

  (b) click Start, right-click computer, and then click Properties.

  (c) in the Advanced tab, click Environment Variables.

  (d) under System variables, click new.

  (e) in the name of the Variable of type MIG_UPGRADE_IGNORE_PLUGINS field.

  (f) in the value of the Variable of type IphlpsvcMigPlugin.dll field.

  (g) click OK three times to close the dialog boxes.

  (h) restart the upgrade installation.

• Microsoft visual c ++ runtime library keeps popping up

  Original title: "Microsoft visual c ++ runtime library"

  you try to download a statement of income and the above "microsoft visual c ++ runtime library" keeps popping up

  Compliments of Robinson Zhang, MSFT, Moderator:

  For the most part, this kind of error can be caused by two factors:

   

  1. components Runtime Library Visual C++ are missing.

  2. software problem.

   

  If the problem is caused by #1, you can reinstall Visual C++ Library Runtime components to solve the problem.

   

  Microsoft Visual C++ 2008 Redistributable Package (x 86) - assuming you are using Vista 32 bit (must be a different version if you are using 64 - bit)

   http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  If the problem persists after installing above package, the question must be a software problem. I suggest you take a cheque to boot this is a software conflict problem. If this isn't the case, it is always recommended to fix the problem with the support of the manufacturer. Thank you for your understanding.

   

  For your convenience:

   

  Clean boot

  =============================

  1. click on start, type "MSCONFIG" (without the quotes) in the search bar and press "Enter" to start the System Configuration utility.

  2. click on the 'Services' tab, check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).

  3. click on the 'Startup' tab, click 'Disable All' and click on 'OK '.

  4 restart the computer and test the issue.

   

  Note: The clean boot is a troubleshooting step. If some programs have been disabled, we can reactivate later. If you see the System Configuration utility, check the box "don't show me this message again" and then click "OK".

   

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Visual c ++ runtime library error at startup. Runtime error! Program: C:\Windows\Explorer.exe

  Original title: Microsoft Visual c ++ runtime library error to star up

  Microsoft Visual c ++ runtime library error at startup

  Runtime error!
  Program: C:\Windows\Explorer.exe
  I can't solve this problem.
  I tried these solutions:
  I deleted all versions of Microsoft Visual c ++ s old and re-installed Microsoft Visual c ++ 2010 and all other microsoft automatic updates
  AutoFix used to define Internet Explore to the initial state (deleted programs side)
  Clean boot startup: error always happens after I uncheched all stars including Microsoft services services
  Start in safe mode: error persists
  Done a full virus scans (avira and f-secure online)
  I tried to restore Windows but there is error and can't do.

  Hello

  This error message or when you tried to restore Windows?

  I suggest you try to create a new user account and check if it helps.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, here is fix a corrupted user account:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile