Why dose my laptop take a long time to start?

Similar Questions

• my laptop takes a long time to start

  My HP laptop takes long when starting

  exactly: the HP splash screen takes about 20 seconds before windows starts to load.

  I updated my bios but no change happens

  My product is HP pavilion dv5 1126em

  p/n: FV752EA #ABV

  Thank you very much for your cooperation.

  If you wanted it looked at, I would contact HP Support Service under warranty.

• After reformatting Windows 7 laptop takes a long time to start and load office

  hiiii! I use the computer hp 620 laptop. who has windows 7 Home Edition premium installed with 4 GB of ram. c drive partition size is 250 GB. When I start my laptop it takes * a long-term on windows startup. then once this process is completed it must also load the desktop. I recently formmated my pc. 2nd question:-when I right click on my computer and click Properties. It shows the memory of 4 GB installed and usable 2.90 GB usable. I use windows 7 64-bit edition Home premium. Wait a rply

  First of all, I would like to launch the troubleshooter of Performance to see if there are problems.
  Then, use the steps listed in optimize Windows 7. This will usually help the most to get the best performance from your system.

  (1) open the resolution of performance issues by clicking on the button start , and then clicking Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click on search performance issues.

  (2) use the following link as a way to improve and optimize your configuration of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance#section_3

  (3) you can review how to speed up your computer.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=A3wXPV89pfU

  (4) If you have not already, delete the temporary Internet files of Internet Explorer. Loading these files can sometimes slow down the startup of your.
  Article number: 260897 - How to remove the content of the Internet temporary files folder
  http://support.Microsoft.com/kb/260897

  (5) run the Microsoft Safety Scanner to check that you don't have malware or viruses on your computer. They can slow a computer at startup too. This is a free download.
  You can download from the following link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this will help you with your computer start faster.

  Sincerely,

  Marilyn

• Laptop takes a long time to start and stop

  http://support-us.Samsung.com/Cyber/popup/pop_modelserialnumberlocation.jsp

  It will be one of them:
  System model 300V3A/300V4A/300V5A/200A4B/200A5B

  NP300V5AH

• my laptop take a long time to begin to have Windows 7

  Windows 7 OS take a lot of time at the start.
  How can I start quickly.

  Hello

  If you mean that it takes a long time to start and load the desktop computer, read this information.

  Read this information.

  http://www.blackviper.com/service-configurations/black-vipers-Windows-7-service-configurations/

  ____________________________________________________

  Many programs under Tools > Options have an option "run at Windows startup" which you can uncheck too

  For what programs you start at startup, we know not what you have installed, but you will know what is installed and you need to start at startup:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.2.1.537
  OS version: 10.2.1.1925
  Carrier: Beeline (KZ)

  Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

  Tried to activate or disable this setting, the result:

  On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

  Off - 1 min 17 sec

  What is the problem of the time difference?

  Good, thanks

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• Reading takes a long time to start

  Even though I have good requirements, I have always problems in execution of Adobe first Pro CS5. Rendered in the preview window (reading) takes long to start and hick-ups in video and audio is displayed. Jump to a point in the script takes awhile, sometimes 10 seconds.

  Project

  My project contains four media (broadcasting sport event) MXF files, each long about a hour and 20 GB in size. I also imported certain components of an After Effect project. Videos audio files have already peak files, located in the same directory as the original files.

  Configuration

  Since I thought that the current 4 GB of RAM was the bottleneck, yesterday I bought some extra RAM and have now 9 GB works fine. Here is my configuration of my Dell XPS 435MT:

  • Processor: Intel Core i7 920 (2.66 GHz, 8 MB cache, 4.8GT / sec)
  • RAM: 9216 MB (3072 MB (3 x 1024) memory DDR3 1067 MHz + 6144 MB (3 x 2048) 1333 MHz DDR3)
  • HDD: 750 GB Serial ATA (7200 RPM)
  • Screen: 21.5 inches S2209W Widescreen Trans European Black Value (1920 x 1080) - DVI - D
  • Graphics card: 512 MB ATI Radeon 4850 card graphics card
  • Audio: Audio Integrated HDA 7.1 Dolby Digital capability
  • OS: Windows 7 64-bit

  
  

  First, preference Setup > memory is 6 for Adobe and 3 GB for other applications. First, the record was good, but after a few minutes, the beginning of a preview takes more time, once again. Sometimes after you quit and restart first, it's going well for a while.

  When previews took a long time to start, I started to see performance data. I do not have any other big process, my CPU keeps exhausted and my RAM is fairly constant at 4 GB. So, which seems to be OK.

  My hard drive might be a problem? I have a hard drive that is partitioned into two disks, where all programs are on C: and D: contains the project and all the video and audio files (a 60 GB of free space).

  Another small thing I spotted is that stuff in After Effects are deposited Summit whenever I open the project. For a specific component on AE, I already count 48 files peak. Other video files don't are not in peak filed again. Is first a new file of the art for all the imported components, even if some components are intact? I don't think this is the cause, but it seems strange.

  Are there other things to watch? Any help would be appreciated kindly.

  Requirements minimum ages being a DEDICATED for the video player. Adobe is very hard to be quite vague on this subject and many complaints have been posted here, but Adobe foolhardedly continues by saying only what is needed to install the program, do not to use it. Common wisdom is at least two better but three different physical disks.

• Computer HP laptop 14-d004tx - takes a long time to start whenever I turned it on

  It really bothers me that my new laptop, (just a week) when takes a lot of time before it starts. After the HP logo, it displays a blank page where my cursor can be moved, so he'll stay a very long time so I find myself stopping and then turn on again and again until it finally starts.

  Is this normal? It really takes a lot of my time specially I use my laptop for work. What should do?

  Thank you! I really need help here...

  Hello
  
  Since it is a week it would be better to contact HP in your area & report it.
  
  Meanwhile, a test of full hard disk & memory test by pressing F2 or F10 as soon as you turn on the system and on entering the BIOS, pass-> component test system Diagnostics.

• 7 OCX WMP on Windows ce 6.0 R3 takes a long time to start playback of video files.

  I try to use the WMP OCX 7 under windows ce 6.0 R3. My application written in c# and works fine, the only problem is the time it takes to start plaing a video file. I noticed that the more the file is large the longer it takes to start. With the debugger, I tried to step of the procedure of game, and the statement that takes all the time is the parameter of the URL property of the OCX.
  Have you ever seen something similar? Can you help me solve the problem? I have not found information about this behavior in on line documentation.

  Hi Danisan,

  Since you are facing problems with Windows CE, you can ask your question in the following MSDN forum to improve assistance:

  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

• iTunes takes a long time to start because I have upgraded to Windows 10

  I upgraded from Windows 7 to Windows 10 a few months back.  Since iTunes then takes like 10 minutes to start.  I tried the setting in compatibility mode for Windows 7 and the other versions.  I tried to run as an administrator.  Nothing seems to work.  Is there a kind of diary where I might be able to see where it hangs at startup?

  Thank you

  Jim

  You should try to completely remove iTunes. Follow this link:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Download and install the latest version of iTunes from http://www.apple.com/itunes/download/ 12.4.1

• Why this video rendering takes a long time?

  OS X Mavericks, Photoshop cc 2014, 2011 core i7 3.4 imac with 32 GB of ram, 256GB ssd drive work, 2 GB video card.

  See images for the configuration of the layers, etc. and export settings. Each 'shift' is a jpeg of a MB placed as a smart object. Each lower third is about 2 MB, placed as a smart object.

  Rendering takes about 24 hours to complete. Why is it so much to take? I tried this on other machines, but they're all around the same time. Is there a better way to do it? Thank you, in advance, for your help!

  

  

  How long we video clips and I see at least one you have added a camera raw smart filter.   I don't know how a smart filter works on a video clip. However if Photoshop need tenant one full frame for each video frame and filter each image frame with ACR then encodes images in a video stream to mp4, it could be a very time consuming process for nearly 170 000 frames.  Have you tried encoding mp4 without using the smart filter ACR adjustment? Also, you do not show the range of the timeline.

• Why my photo library takes a long time to create or open a library?

  

  I have my photo library automatically updated to Version 1.0.1. When I click on the "Get Started" button, it is still loading. It was a night.

  There is an important image in my library. What should I do?

  Hi skrxoxo,

  The length of time that it will take to your new to create photo library depends on the number of photos that you have your different libraries and your internet connection speed if you have enabled iCloud photo library.  It could take up to a week if your photo collection is vast. Here is some information on the process:

  Start with Photos for OS X
  https://support.Apple.com/en-us/HT204655

  If you need to access the image important that you mentioned above, you can use the Spotlight search if you know the name of the file.  Or, you can open iPhoto or Aperture, if the file exists in one of these libraries.

  Take care