Why DW does not close after that I downloaded to my site and push the closebutton?

Similar Questions

• roboformtaskbaricon process does not close after that firefox 9 is closed

  Hello

  roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.

  Thank you, specialist

  On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.

  • http://www.RoboForm.com/support/manual/RoboForm#files

  Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:

  • http://www.RoboForm.com/support/overview

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Preloader does not close after that primary site is loaded

  Hi guys,.

  I know it's a really really basic problem, but I am very new to flash and still don't understand AS3.

  I use the sample file external preloader provided with CS5 as a basis for my front loader on measure. It works fine except that once the main site has loaded and is open, the preloader is loaded in the background.

  My code is as follows:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Change in //Optionally a portecrochet and the visibility of all of the progressbar.

  addChild (contentLoader);

  removeChildAt (0);

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

  How can I make the pre-loader close itself once the main site has been loaded correctly?

  Any help would be really appreciated!

  Thank you!!!

  use:

  var contentLoader:Loader;

  loadContent ("index.swf");

  function loadContent(url:String):void {}

  contentLoader = new Loader();

  contentLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRES S, loading);

  contentLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoaded);

  contentLoader.load (new URLRequest (url));

  }

  function contentLoaded(evt:Event):void {}

  Possibly set up a support clamp and adjust the visibility of the progressbar.

  addChild (contentLoader);

  removeChild (progressbar);

  ProgressBar = null;

  }

  function loading(evt:ProgressEvent):void {}

  var loaded: number = evt.bytesLoaded / evt.bytesTotal;

  setBarProgress (loaded);

  }

  function setBarProgress(value:Number) {}

  progressbar.bar.scaleX = value;

  }

• "Private browsing" window does not close after opening web site

  "Private Browsing" window does not close after the opening of a web site; He remains on the side of wight of the screen and cannot be closed.

  It turns out that partially Wen site on the left side of the screen and can be closed.

  Problem solved. Bookmarks removed and replaced and now everything works according to plan.
  Thank you

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  the printer is not the shades of grey even print cartridge is not yet empty

  y at - it software for hauler color printing?

  Thanks for your comments

  Hello Nilsvolkel,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  Do not require any special software.

  However, you can use the steps in the following articles and check.
  Reference:
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

  http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

  Please keep us informed.

  Thank you

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• my dvd is battery and does not open after that I tried to install a program.

  Hello

  I started to install a program on my laptop.

  The installation did not pass. And the cd is stack on the disc and does not open.

  On my computer, it does not see the drive that reports to the Conference on disarmament.

  shows that C; and f:

  Hello Arturomaduro,

  By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options.

  1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick.

  2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy.

  Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• VM does not start after that ESXi was replaced by version 6

  Hi all

  
  

  I ran a scary problem after replacing my VMware ESXi version 5.1 to version 6.

  
  

  My server is an Areca RAID controller which is supported by version 6 default. Yes, after installation (clean installation) 6 ESXi on a key USB internal drive, everthing seem good. It shows my store of data stored on my RAID controller and I can see the content, (see attachment, image of my data store) including my VM file - SBS2011.vmdk.

  
  

  I'm not a highly qualified VM pro, but the hard (about 40GB) file must contain my full Windows environment (Windows 2011 server).

  
  

  Have access to my data store on my RAID controller and access to the original .vmx file, everything seems fine. Make a right click of the .vmx, add to the inventory and I'm ready to go... but... it does not start.

  
  

  It shows a resource error, not this additional information. My feeling is that there is something wrong with the location of the Swap, because it looks like the place to swap is located outside the VM storage location (hard). This is what looks like my .vmx:

  
  

  It is not stored on my hard ' / vmfs/volumes / 512 b 5271-cb39b672-c198-001e676870c7 /! It points to a different location.

  
  

  (File VMX also downloaded with this post)
  

  
  

  No I have two question. What would be the cause of this problem, not able to start the virtual machine?

  
  

  Second question. Perhaps a solution: delete all files in my store of data, except the VM-SBS2011 - flat hard file, create a new virtual machine on my server, using an existing drive (showing my VM-SBS2011 - flat hard), I'll be able to boot my virtual machine? It will create a (work) .vmx file to the cool address? There where no snapshots exist when I close my Windows OS down the last time. I lose all the data? Help, please!

  
  

  Currently, I download the full content (all files) of the database on my local computer as a backup. I hope that my hard file will be sufficient.

  
  

  I'm really grateful for your help!

  
  

  . Encoding = 'UTF-8 '.
  config.version = '8 '.
  virtualHW.version = '8 '.
  pciBridge0.present = 'true '.
  pciBridge4.present = 'true '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'true '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'true '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'true '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.functions = '8 '.
  vmci0. Present = 'true '.
  hpet0. Present = 'true '.
  NVRAM = "VM - SBS2011.nvram.
  virtualHW.productCompatibility = "hosted".
  powerType.powerOff = 'soft '.
  powerType.powerOn = "hard."
  powerType.suspend = "hard."
  powerType.reset = 'soft '.
  displayName = "VM-SBS2011.
  extendedConfigFile = "VM - SBS2011.vmxf.
  floppy0. Present = 'true '.
  numvcpus = "4".
  cpuid.coresPerSocket = "4".
  scsi0. Present = 'true '.
  scsi0.sharedBus = 'none '.
  scsi0.virtualDev = "lsisas1068".
  memsize = "12288.
  scsi0:0. Present = 'true '.
  scsi0:0. FileName = "VM - SBS2011.vmdk.
  scsi0:0. DeviceType = "scsi-disk" hard
  IDE1:0. Present = 'true '.
  IDE1:0.clientDevice = 'TRUE '.
  IDE1:0. DeviceType = "atapi cdrom.
  IDE1:0.startConnected = 'TRUE '.
  floppy0.startConnected = "false".
  floppy0. FileName = "".
  floppy0.clientDevice = 'true '.
  ethernet0. Present = 'true '.
  ethernet0.virtualDev = "e1000e.
  ethernet0.networkName = 'network of the VM.
  ethernet0. AddressType = 'generated '.
  chipset.onlineStandby = "false".
  disc. EnableUUID = 'true '.
  guestOS = "windows8srv-64.
  UUID. Location = "56 4 d fe 63 9 b 1 has c6 - ba b 0, 00 e8 6f 3rd 80 e8 7A.
  UUID. BIOS = "56 4 d fe 63 9 b 1 has c6 - ba b 0, 00 e8 6f 3rd 80 e8 7A.
  VC. UUID = "6th 52 2d 21 82 34 04 - c8 18 19 67 f8 67 c3 a5 4 d.
  Snapshot.action = 'keep '.
  SCHED. CPU.min = '0 '.
  SCHED. CPU. Units = "mhz".
  SCHED. CPU.shares = 'normal '.
  SCHED.mem.min = '0 '.
  SCHED.mem.shares = 'normal '.
  scsi0.pciSlotNumber = "160".
  ethernet0.generatedAddress = "00: 0C: 29: 7 a: e8:80.
  ethernet0.pciSlotNumber = '192 '.
  vmci0.ID = "1048242304".
  vmci0.pciSlotNumber = "32".
  cleanShutdown = 'TRUE '.
  Replay.Supported = "FALSE".
  sched.swap.derivedName = ' / vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots/VM-SBS2011-6cbed3a5.vswp '.
  Replay.FileName = «»
  scsi0:0. Redo = «»
  pciBridge0.pciSlotNumber = "17".
  pciBridge4.pciSlotNumber = "21".
  pciBridge5.pciSlotNumber = "22".
  pciBridge6.pciSlotNumber = "23".
  pciBridge7.pciSlotNumber = "24".
  scsi0.sasWWID = "50 05 05 63 9 b 1 a 6f c0.
  ethernet0.generatedAddressOffset = '0 '.
  VM. GenID = "5456487432926317901."
  vm.genidX = "901288717606574007".
  hostCPUID.0 = "0000000d756e65476c65746e49656e69".
  hostCPUID.1 = "000206d70020080017bee3ffbfebfbff".
  hostCPUID.80000001 = "0000000000000000000000012c 100800.
  guestCPUID.0 = "0000000d756e65476c65746e49656e69".
  guestCPUID.1 = "000206d700040800969822031fabfbff".
  guestCPUID.80000001 = "00000000000000000000000128100800".
  userCPUID.0 = "0000000d756e65476c65746e49656e69".
  userCPUID.1 = "000206d700200800169822031fabfbff".
  userCPUID.80000001 = "00000000000000000000000128100800".
  evcCompatibilityMode = "FALSE".
  vmotion.checkpointFBSize = "4194304".
  softPowerOff = 'TRUE '.
  tools.syncTime = "FALSE".
  bios.forceSetupOnce = "false".
  IDE1:0. FileName = "".
  bios.bootDelay = "5000".
  snapshot.redoNotWithParent = 'True '.
  unity.wasCapable = "FALSE".
  tools.remindInstall = 'TRUE '.
  workingDir = "/ vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots".
  fileSearchPath = "/ vmfs/volumes/512b5271-cb39b672-c198-001e676870c7/VM-SBS2011-snapshots;.»
  checkpoint.vmState.readOnly = "FALSE".
  checkpoint.vmState = «»
  scsi0:1.present = 'TRUE '.
  scsi0:1.DeviceType = "scsi-passthru.
  scsi0:1.filename = ' / vmfs/devices/genscsi/naa.5000878000000000 '.
  scsi0:1.allowGuestConnectionControl = "FALSE".
  SCHED.scsi0:0.shares = 'normal '.
  SCHED.scsi0:0.throughputCap = 'off '.
  scsi0:0.mode = "persistent".
  scsi0:2.present = "FALSE".
  sched.swap.hostLocal = "disabled".
  

  I copied the file-VM in VMWare ESXi 5.5 on another data store (more old HP SAS) server en guess what... it's starting! So for now I'm back in business. It seems that there is something wrong with the original server, because my hard file appears to be damaged otherwise it would not start on my old good spare HP server...

  I still wonder what the hell happened after I replaced the internal drive of hypervisor type USB and installed ESXi 6 on a cool USB. I got in the RAID array. Now, even when I start the server of origin with it's original ESXi 5.1 USB (intact), I got the same error when you try to start the virtual machine. Is thinking there's something wrong with the RAID array but I can access the database on the RAID array and (after you move the content to another VM machine) all files are very well run smooth on the other server. Kill me.

  Any ideas?

• Firefox does not close after checking plugins

  I do a check for plugins B4 I close Firefox, then I always run CCleaner after that, but lately CCleaner has been telling me that I always open a browser and asks if I want to close Firefox, if I say 'yes', then he says it takes too long I want to force Firefox to close! I have not changed anything this, updated or uninstall anything. I am running the latest version of Firefox (not beta), it is the only browser I use. I run Windows XPPro and work on an IBM ThinkPad T42p.

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs

  See "Firefox crashes when you exit it:

  • https://support.Mozilla.org/KB/Firefox+hangs

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• I have an EpsonRX420 it will copy but does not print after that I inserted a new crtridge of ink

  I have an Epson RX420 and inserted a new ink cartridge after what I coud copy but not print

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog