Why everytime I try to run Fix It, I get an installation error saying to try later

Similar Questions

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Why everytime I try to export a photo in lightroom, it says that I don't have enough memory, if my computer and laptop hard drive have a lot of memory?

  Need help to export photos!

  As I said, at the moment all you can try to do is export into smaller batches and ensure that all other programs are closed.

  You have BOTH a 64-bit operating system and 8 GB or more of memory (get one or the other and not BOTH, will not help). On systems like are not the problem.

• How can I fix CS6 installation error saying there is not enough space or incorrect write rights?

  After a failure of system on my old machine, I'll have to re - install my CS6 package on my new.  I downloaded the installation from the Adobe site files (my first purchase was a download so I have no installation disc), but when I try to install I get the message that there is an error due to space or not enough incorrect write for the folder rights during the extraction phase.  There are more than 350 GB of free hard disk and I am the administrator of this computer with any other profiles.  I also used the "Run as Administrator" option.  I was able to install Lightroom without any problem, only CS6 is having a problem.  I am currently running Windows 7.  I think there must be a setting that needs to be fixed, but I don't know where to start.

  Hello

  Set to "Full control" permissions on the files of Adobe for all users in the following locations:

  • [System drive]: \Users\ [user name] \AppData\Local\
  • [System drive]: \Program Files (x 86) \Common Files\

  Restart the computer.

  Now proceed with the installation.

  Hope that helps!

  Kind regards

  Sheena

• When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

  I have Windows XP service pack 3.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search on the name of the file means no "hits" which makes things even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• When you run the backup, I get access denied error code 0x80070005.

  If I do not know what file it is for how I spend it?

  And also tell us exactly how you try to back up and where you try to save up to.

  See you soon.

• When you try to re - install Windows XP, I get a popup error saying "error C:\WINDOWS\system32\grpconv.exe".

  SO here's my story... I decided to reinstall windows xp on my dell optiplex gx260, starting and layout completed successfully, the installation was so close to finsh at 10 minutes a mistake camu upward in a box >

  C:\WINDOWS\system32\grpconv.exe

  Windows cannot access the specified device, path or file.

  You can not have the appropriate permissions to access the item.
  "with the ok key.
  What should I do now?
  original title: C:\WINDOWS\system32\grpconv.exe error? Help

  Hi shalmeetkaran,

  1. How you install Windows XP on the computer?
  2. You use the installation CD of Windows XP provided by Dell, or receovery hard disk partition?
  3. You did a full format of the hard drive?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• I have Windows 7 32 - bit PC running, using uTorrent I get the BlueScreen error

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: d1
  BCP1: 00000014
  BCP2: 00000002
  BCP3: 00000000
  BCP4: 8A2E4BF2
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  The dump file is uploaded here:
  https://SkyDrive.live.com/redir?RESID=B0361FAAAC5DAD7D! 198
  And the Crash report:
  https://SkyDrive.live.com/redir?RESID=B0361FAAAC5DAD7D! 199
  So, how to stop this error?

  NETIO.sys crashes

  Folderlock is installed? I see that mfehidk.sys is also on this system, this belongs to Mcafee.

  0x000000D1 and netio.sys is a known BSOD caused by a Mcafee program. I would get the Mcafee removal tool and remove the rest of Mcafee, if you uninstalled

  Kaspersky AV is also installed

• During the installation of Acrobat DC why do I get a configuration error, saying: it cannot be installed on this operating system?

  I welcomed CC updated XI Acrobat Acrobat DC.  I bought DC Acrobat but serial number does not work with the version installed by creative cloud.  And when I uninstall this version, downloaded Acrobat DC installation generates an error indicating that the application cannot be installed on this operating system. I lost my money by buying the download?

  Previously titled:

  How to install a downloaded version of Acrobat DC purchased with a serial number allocated, when I get a Setup error, saying: it cannot be installed on this operating system? Creating cloud had already updated Acrobat XI in DC, but will not work with the new S-N

  Allan, please see: download Acrobat products | Standard, Pro | DC, XI, X. Please check the system requirements for | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC

• Why lightroom does not export my photos?  I get a pop up saying that an error has occurred.

  

  This thread should solve your problem...  https://forums.Adobe.com/thread/1303578?TSTART=0

• I get an installation error message when I try to download an add-on to Photoshop.  How can I download this file?

  I am trying to download an add-on for Photoshop and have received an error message that the installation has failed, the file operation error.  Y at - it another way to download this or can correct the file so it can be downloaded?

  What we call the add-on? We may send by email if you can please provide your e-mail address to [email protected]. The error is unlikely to be due to the add-on itself.

• Get error 0 x 80070003 when you try to run Fix - It.

  Fix, that it does not start and I get error 0 x 80070003. XP SP3 and Windows Security Essentials running.

  Hi Ted,

  Exactly what Fix - it by train are you running and what's - the site would help (or you're talking about the downloaded version)?  Why are you trying to run Fix - it - what is the underlying problem , not to mention that the problem with Fix - it?  If this problem has an error message, please report exactly Word for word including all codes.  Please do the same for the error message above as well.

  Although designed to update problems, maybe will help the following articles of this error code: http://support.microsoft.com/kb/956705 and http://support.microsoft.com/kb/910336.

  See also: error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.microsoft.com/kb/916248.

  The following were also suggested to: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/437368-updating-kb892130-error-0x80070003.html (although again, not for the reason you mentioned, but it may work as she is bound).

  1. stop the service automatic updates, clear the contents of the data store
  Download the files and restart the automatic updates service.
  Stop the automatic updates Service.
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click on stop.
  Click OK.

  2 remove the contents of the DataStore and Download files.
  Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
  Click OK.
  Delete the content of the files, the data store and download (but) NOT the files themselves

  3. start the Service automatic updates
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click Start.
  Click OK.

  I hope this helps.

  Good luck!

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  PS will be only savePSD files up to 2 GB. You need to save in the form of a BODY.

• WHY THAT I RECEIVE A DISCONNECTED MESSAGE EVERYTIME I TRY TO SIGN IN CC?

  EVERYTIME I TRY TO SIGN IN CC I GET ONE YOU SIGNED MESSAGE AND TOLD TO SIGN AGAIN.  I TRIED THE IMSLibReplacer.exe, I tried to uninstall and reinstall anything.

  Jeff,

  Thanks for the quick response.  I am on a network of area managed using Windows 7 Ultimate.  But I think I got it all working now.  I went and deleted the opm.db and now everything seems fine.